Install Steel Bumpers On A Land Rover Discovery Series II

Рет қаралды 101,764

9 жыл бұрын

Outfitting a Land Rover Discovery Series II for Off-Road / Part Two
Installing Front and Rear Heavy-Duty Steel Bumpers and Winch:
Nowadays you can find a good used and affordable Discovery Series II for $3,500-5K.
Add another $3K-5K and you can outfit your D2 for off-road in no time.
Watch Doug, our Land Rover Master Technician, in Part Two of our video how-to series, as he removes, replaces and installs the front and rear bumpers with new heavy-duty steel bumpers to give the vehicle front and rear clearance for off-road use.
Doug will also address the installation of a winch, an essential accessory for off-road use, to the front bumper.
1:07 Reason for steel bumpers
1:41 Front bumper installation
3:05 Fog light connection
9:45 Rear bumper installation
13:55 Taillights reinstalled
16:09 Winch installation
21:28 Benefits of a winch
23:12 Ordering information
Parts List:
Heavy Duty Steel Front Bumper
www.roverparts.com/body-chass...
Heavy Duty Steel Rear Bumper
www.roverparts.com/body-chass...
Heavy Duty Steel Front Bumper & Winch Kit
www.roverparts.com/body-chass...
Questions about this video? Call us at 1-800-533-2210 or contact us via live chat at roverparts.com.
For more how-to videos on the Discovery Series II and other Land Rover vehicles visit www.roverparts.com/resources/...
#atlanticbritish #discovery2 #bumper #offroad

Пікірлер: 25

@shotsbyscottd 10 ай бұрын

I must say…They SEVERELY understate the complexity of the two hitch bolts…mine were somehow 18mm bolts and had been RED Loctite’d in at some point (I doubt that was factory)…it took an air driver like 3 tries and a 24” breaker bar to loosen mine. Not to mention removing the hitch completely…all I’m saying is don’t underestimate the process…but the result is totally worth the effort…the extra stability from the hitch bracket is awesome!

@davidhannan2672 Жыл бұрын

Just finished putting one of those rear bumpers on my 03 disco 2. Heres a couple of tips: 1. The long bolts holding the hitch receiver to the chassis have red thread locker on them. Heat them up with a torch for a couple of minutes first and they'll come out way easier. 2. I tried putting the bumper on the way they do it in the video but I had a lot of trouble. It was easier to remove the hitch receiver entirely, lift the bumper into place, bolt it on with the bolts behind the fog lights, and then raise the hitch receiver back into place and fasten it in.

@72Disco1998 9 жыл бұрын

Great video!

@christophrosa1651 2 жыл бұрын

Super film

@johnwalters6641 5 жыл бұрын

Does removing the crush cans make it a less safe vehicle, or are they simply for low impact absorption?

@vladimirlopez4851 Жыл бұрын

Hello my dear, a pleasure to greet you and congratulate you on your valuable work. On the other hand, I would like to ask you if there is a cheap and complete scanner for Land Rover Discovery 2 V8 year 2000. thanks for your help and input

@edwardthomas3695 8 жыл бұрын

can you make a video how to get into the rear wiper motor

@The-Bladeslinger 8 жыл бұрын

what is weight of each of the bumpers?

@OWN03 3 жыл бұрын

What is the price of front bumper that you use on video?

@TexanUSMC8089 7 жыл бұрын

why wasn't the bumper made so it stuck out about three inches further. Then you wouldn't have to cut the grill.

@Bread996 6 жыл бұрын

Because that lessens the approach angle, which is more important to an offraod vehicle. Although it hurts cutting up your truck the first time, it geats easier as the trail scars collect. Function over form :)

@myrongaines5542 4 жыл бұрын

It so that it makes it easier for the tow truck driver to hook up as u break down on the road

@blackprince4074 Жыл бұрын

@@myrongaines5542 Nah! Land Rover's don't break down.