Install the Micro Swiss All Metal Hot End on your Ender-3 V2 3D Printer

No video

Install the Micro Swiss All Metal Hot End on your Ender-3 V2 3D Printer

Рет қаралды 156,118

Күн бұрын

Hello, 3D Printing friends! Today we'll see how to install the Micro Swiss All Metal Hot End on your Ender 3 V2 3D Printer! I bought this on Amazon so I could print at higher temperatures on my Ender 3V2. Temperatures that would ruin the PTFE liner on the stock hot end. But now, I can print at temperatures up to 260˚C!
The promo code has expired, but you can still check out Micro Swiss's products on Amazon!
• amzn.to/339yLu8 🇺🇲US [affiliate link]
Did this video help you out, save you a bunch of time, or help you learn something new?
If so, please consider becoming a channel member, or buying me a coffee, or leaving a tip! Your support really helps, and is VERY MUCH APPRECIATED!
✅ BV3D Channel Membership: kzfaq.info...
☕️ Buy Me a Coffee: www.buymeacoff...
👍🏻 PayPal tip jar: www.paypal.me/...
*️⃣ The BV3D Channel Storefront on Amazon:
• www.amazon.com...
*️⃣ Popular 3D printer affiliate links:
• BIQU: shrsl.com/3s4hr
• Creality: shrsl.com/3qu2u
• Comgrow: bit.ly/33xcDtB [Check out the Creality REFURBS!]
• Elegoo: shrsl.com/3pu98
• FLSun: flsun3d.com/?r...
• Pergear: bit.ly/BV3Dper...
• Sovol: bit.ly/3h90d2L
• Sunlu: bit.ly/3hGNzpQ
• Voxelab: bit.ly/3vVG9Wq
*️⃣ In the market for a magnetic flexible build system for your 3D printer?
💥Wham Bam Systems flex plates: bit.ly/2YzogLZ
As a Wham Bam Systems Associate I earn from qualifying purchases.
*️⃣ Shop for just about anything:
🛒🇺🇲US: amzn.to/2x4hBxS [affiliate link]
🛒🇨🇦Canada: amzn.to/2Ycb5ju [affiliate link]
As an Amazon Associate I earn from qualifying purchases.
SOCIAL MEDIA
Follow me on Twitter (@bryan_vines): / bryan_vines
Disclosure:
I sometimes receive compensation such as discounted or free products, and when applicable, this is disclosed in videos and their descriptions. Whether free, discounted, or paid full price, any reviewed product is tested to the best of my ability, and I give my honest impression. All opinions expressed are my own.
#MicroSwiss
#AllMetal
#3DPrintingFriends

Пікірлер: 243

@MementoMoriVeritas Жыл бұрын

In the two years since you posted this, nobody else, before or since, has posted a better explanation video for this. All of your Ender3 V-2 videos are top quality. Thank you, sir!

@iocyber Жыл бұрын

For fral

@TheDgdimick 3 жыл бұрын

"At about 240C some PETG will start to deform" - Brian, this is the BEST advice I've heard so far on why to switch to an All Metal Hot End.

@TriconPOE 3 жыл бұрын

I guess it's a typo but it's PTFE, not PETG. PETG usually fully melts at 240c

@wittworks 2 жыл бұрын

Once again. Nailed it. You are the Ender 3 expert on KZfaq. Go Spurs!

@JanB12Bikes 3 жыл бұрын

Love your dorkiness and 80s TV-Presenter-Style! 👍

@brentglassford4697 3 жыл бұрын

Followed this guide and worked great. Just to note, I had to reduce my retraction to 4mm and increase my printing temp +5 degrees C to resolve an issue where my all metal hot end nozzle was becoming blocked when trying to print PLA on my normal settings. Might save someone a headache!

@L39T 2 жыл бұрын

fanks

@jimmyrepine8952 2 жыл бұрын

A year later, was the upgrade to an all metal hot end worth it?

@philipjernas8112 3 жыл бұрын

The Bob Ross of 3D printers ❤️

@euanrundle3091 3 жыл бұрын

I've been watching your videos for about a year now and you just seem like an all round really nice guy, and you put so much effort into your videos, even more than some of the larger channels, I admire that! Keep it up. Euan

@indigo0086 2 жыл бұрын

I’m sure that changes when he accidentally touches the heating block

@eds1942 2 жыл бұрын

“Don’t over tighten the screw, the idea is to keep the (thermistor) wires in place without crushing them.” You Sir are a life saver. And I’m a fool. I couldn’t figure out why the printer would not boot up. Or alternately, reset in the middle of heating up. You only need it hold the thing in place, not pressure weld it into the block.

@henricoderre 2 жыл бұрын

Hi Bryan. Thank you for making it clear that the hot end and nozzle should be replaced if you're working with filaments that require higher melting temperatures. Some vloggers make it sound like a must, and it's not if you're printing with lower temperatures like those needed to melt PLA.

@saltysteel3996 3 жыл бұрын

I've been printing CF nylon with the stock hot end. Using a hardened steel nozzle and Capricorn bowden tubing. I'm printing it at 250 C. Capricorn can be used at 260 C indefinitely.

@Agamemnon2 3 жыл бұрын

I like that filament spool holder, it's both low and doesn't make the printer excessively wide.

@timjerome8942 3 жыл бұрын

Thank you.I just installed one but was concerned that the bowden tube doesnt go in very far. You mention this and alleviated my worry. Much appreciated!

@liammargetts 3 жыл бұрын

Damn, recently ordered a ender 3 V2 and I do want to upgrade some of the components, fortunately you seem to have got all the videos i need for the upgrades. Love this channel

@danielmills7972 2 жыл бұрын

Nearly a year after this has been made: just used this to guide my installation. Thank you!

@greengate3d 3 жыл бұрын

NICE! Thank you for the shout out and, of course, your business!!! You're also the first guy to use that bottle opener properly. Using your thumb to push up, was EXACTLY how its intended to be used. What infill did you use? We run them at 100... gives it a nice heft and when we give them out at trade shows (sometime in 2021 we hope), we think they'll be well received.

@BriansAquariums 3 жыл бұрын

Thank you for this video. Helped me install a new hot end on my ender3v2. Next up is installing the Aliminum extruder, then the BLTouch. Going to watch your other two videos now. Thank you and please keep making these videos for us beginners!! They really help out so much and are the best and thorough out there!

@agreycoast 3 жыл бұрын

Just placed my order! Cant wait for it to arrive!

@somashaman2689 3 жыл бұрын

Bro your gonna love it.. Just make sure it's put together tight, like tighten when its hot so you get no leakage! I just printed a carbon fiber wrench 🛠 😎

@CraftyEnelrad 2 жыл бұрын

Thank you! I have successfully replaced my hot end on my Elegoo Neptune 2S with the Micro Swiss. It took me longer to think about it than to actually just do it. Your video made it so easy. Thank you!

@didactics 3 жыл бұрын

One time I want you to slip up and say... “I’m Casey Kasem”

@BV3D 3 жыл бұрын

"Keep reaching for the stars, but keep your feet on the ground. Or you'll float off into space and die a horrible, painful death."

@Slamminbassplayer 3 жыл бұрын

That green color is amazing. Thanks for the vid!

@phucky0o 3 жыл бұрын

Can you please do a tutorial on how to change the mainboard and PSU fans on the Ev2 as they are the loudest. THANKS!

@nomadautodidact 3 жыл бұрын

Hero Me Gen 5 after that!!!

@AdrianGonzalez-un6di 3 жыл бұрын

Thanks man, you saved my life. I was starting to print in ASA and the recomenadtion was this upgrade and now with your tutorial i'm 100% sure how to do that change, thanks from México.

@jakewallace5591 2 жыл бұрын

Love seeing Wera tools! Very nice

@W4TRI 3 жыл бұрын

Best thing for any Ender printer. Thanks! Love mine!

@BV3D 3 жыл бұрын

I've been very happy with the Micro Swiss products, too! 🙂

@williamr.holmes2037 3 жыл бұрын

Would love to see you upgrade the ender v2 with the micro swiss direct drive extruder. In any case I think this is the first youtube comment I've ever made. That's just how much I appreciated this video. The technical instruction combined with very helpful camera angles makes for a 10/10 video.

@BV3D 3 жыл бұрын

Hi William! I've been thinking of doing that. I'll need to either find or design something to adapt the V2's fan shroud to fit the mounting holes for the old-style fan shroud, since the hole patterns are different. So far the only thing I've seen is a little mount that kind of holds one of the fans in place, and then you glue the second fan onto the first one. That's very utilitarian, and seems kind of fragile. So maybe early 2021? Also, thanks for your comment! 👍

@williamr.holmes2037 3 жыл бұрын

@@BV3D Looking forward to it! Popular printer and upgrade. Just set mine up and currently tooling through some under-extrusion problems. And I used the thingverse print of the ender 3 pro shroud for mine, albeit I do plan on finding something better eventually.

@angelg796 3 жыл бұрын

When will you make video on installing micro swiss extruder and hotend on the ender 3 v2? I need it please.

@beefsoda1 2 жыл бұрын

Great video! Subscribed!

@WhamBamSystems 3 жыл бұрын

As always, super clear instructions! I am currently running my microswiss with a 0.8 and it’s doing great!

@der_rechtsamwald 3 жыл бұрын

Thank you very much, that helped me like nothing else! ♥

@tegaidayt 2 жыл бұрын

You are the Rick Baylis of 3d printing! Thank you!

@delscoville 2 жыл бұрын

I installed a Gulf Robotics hot end on mine, it's identical but costs about half the price.

@dspringer3792 2 жыл бұрын

Exceptional instructional video!

@tonyriek4997 3 жыл бұрын

Another great video Bryan. I love my microswiss complete extruder kit for the 3 Pro. It is amazing and prints great...

@BV3D 3 жыл бұрын

I may pick up one of those direct drive kits. I like that there's an upgrade path if you already have the hot end. And if you don't, you can get the complete kit. 👍

@allenjackson8615 Жыл бұрын

Your videos are fantastic, thank you so much!

@ZillionPrey 3 жыл бұрын

Randomly looked on your shirt, and instantly loved it :D Great video!

@dogastus 3 жыл бұрын

Very thorough description of the process, thank you!

@m0neez 3 жыл бұрын

Could you share STL for PTFE tube cutter?

@spikekent 3 жыл бұрын

I have the MicroSwiss on the Borg with the 0.8mm hardened nozzle and it prints great. It's fed by the Bondtech BMG extruder, great team.

@avejst 3 жыл бұрын

I love the Micro Swiss hotend. I like the E3D V6 even better Thanks for sharing your process to all. Thanks for sharing :-)

@iocyber Жыл бұрын

Bro this tutorial is amazing

@MrGarkin 3 жыл бұрын

Bi-metal heatbreak from Trianglelab + Arctc MX-4 on cold end could be a reasonably better choice.

@supercarowners 2 жыл бұрын

Easy to follow instructions. Nice video mate!

@Sk.your.bestie 2 жыл бұрын

Thanks so much

@JohnSmith-nc4rv 3 жыл бұрын

Thank you! Just upgraded my Ender using this vid. Works perfect!

@javieruriel 2 жыл бұрын

Hey why don’t you make the cups more bigger the one you selling is to small for me I really enjoy drinking coffee. Great video by the way thumbs up!!

@adithyayuri 3 жыл бұрын

Thanks for the video. Quality content.

@mikelaurie3850 3 жыл бұрын

You should also mention the need to drastically reduce rettacts and also change the way to do filament chsnges. Basically you should NEVER retract filament more than 1mm or so else you get clogs in the heat break

@dugy40 2 жыл бұрын

1mm? Bull. 4 minimum. Usual 5-6

@Patrick-857 Жыл бұрын

@@dugy40 I'm running mine at 0.9 with no issues.

@HighVoltageKits 3 жыл бұрын

Interesting comments on the temperatures.and fumes I run a prusa mini and an i3 and the standard temperatures for petg is 250C. Both printers handle polycarbonate and carbon infused with ease. One is a bowden tube and the other direct drive but I am pretty sure the i3 is ptfe lined. No warnings from prusa about fumes from the tubing at high temps lol. Thanks for the video. Have one of these on the way for the ender extender project!

@timd9430 3 жыл бұрын

Great video as usual! What would be nice is a video explaining how to modify the firmware to increase the nozzle tempature limit for printing high temp filaments such as Nylon etc beyond stock 260c.

@19134ANDY 3 жыл бұрын

I would like to know that also

@bryanharness1122 2 жыл бұрын

Me 3

@colinfielder6695 3 жыл бұрын

Hi Bryan I have a Micro Swiss All metal Hot End on my Ender 3 and use a Micro Swiss A2 plated Wear Resistant Nozzle which i fully recommend especially when printing with Glow in the Dark Filament!

@dalewhitmore143 3 жыл бұрын

What about firmware if the hot end is replaced? What do we do here for temperature calibration? What is the max temp of the stock heater? Also how do we adjust retraction setting? This is not covered and I feel it's an important step that's left out of this video and needs to be acknowledge when following this upgrade. Can you do a follow up video because I haven't seen one yet.

@davey3765 3 жыл бұрын

Put this on my CR-10S (heavily modded) and never looked back, its a Ferrari of a hot end and can let you print anything your heater let you. I'm killing it with nylon & PC granted I have a 750 watt AC heated bed. Love it, love it, love it.

@donoho93 2 жыл бұрын

Great videos bryan.im new to the space and your videos are very easy to follow along with

@50deserteagle 2 жыл бұрын

Thanks for sharing.

@iocyber Жыл бұрын

Commenting again because this was gods work thank you

@BWTECH0521 3 жыл бұрын

you saved the day again Bryan, thank you so much!

@JeffJohnson-photos 2 жыл бұрын

Thanks!

@BV3D 2 жыл бұрын

You are super welcome! Thanks so much! 👍

@jamesdean6451 3 жыл бұрын

Thanks Bryan, another great video

@BV3D 3 жыл бұрын

Thank you, James! 😀

@turkeysammich1059 Жыл бұрын

Thank you!!!

@frankdearr2772 10 ай бұрын

Great, thanks 👍

@jonathonroberts8714 3 жыл бұрын

Going to need a link for that shirt!

@fezz88 3 жыл бұрын

Super video! I applauded for $2.00 👏

@BV3D 2 жыл бұрын

Hi Greg! I realize this is nearly a year late, but THANK YOU very much! KZfaq rolled out this Applaud feature (now called Super Thanks) but, until very recently, didn't give creators an easy way to find them. Now they have, and I wanted to say I am grateful for your support!

@HKHasty 3 жыл бұрын

thank you! Saved me a ton of time and pain :)

@danielknight1162 2 жыл бұрын

I cant remember the video you talked about changing the max temp on an ender 3 max

@jreich444 3 жыл бұрын

Love your videos! Thanks!

@ZebraandDonkey 3 жыл бұрын

Nice video. Might suggest using the cool down feature that allows the fan to cool the hotend. Helps keep the filament from cramming and jamming. Otherwise great work as usual sir.

@ronm6585 3 жыл бұрын

Thanks.

@solidusseal 3 жыл бұрын

Sooooo .. all nice and dandy stuff in this video ... But my 5 yo daughter just wants to know where you can buy that T-shirt !

@BenS1002 3 жыл бұрын

Great video. Ever thought about trying out an E3D V6 on the Ender 3?

@fredriffle4147 3 жыл бұрын

Your vid had me rolling I think I’ll have to watch it again I was laughing to hard . Awesome ty for the info

@lm4278 3 жыл бұрын

I print at 250 all day long with the stock heater.

@bezurro8399 3 жыл бұрын

Hahaha pathetic I print at 251 pleb.

@sonub5401 3 жыл бұрын

Looking at getting this printer as my first printer. Love the upgrade. Would love to see an upgrade video of the fan you would use instead of the stock fan. Is the spool an upgrade or did you just put it in a different place? Thanks for your help and love the videos.

@justbenny84 3 жыл бұрын

Is there a video about your way to attach the filament spool to the printer? I like it very much!

@gregr5 3 жыл бұрын

I have one of these and generally love it with one exception. Micro Swiss refuses to add an M3/M4 threaded hole for a thermistor cartridge. If you want to print above 260, it's a no-go. The glass bead ntc thermistors have ptfe insulation on the conductors. If you want a to go hotter, you need a cartridge thermistor and micro swiss refuses to add a port for one. I am looking for a clone heater block with the port for a cannister. VERY annoying for such an expensive hot end.

@legendarycustomleathers8387 3 жыл бұрын

Luv ur vids...huge help

@andrewdowney760 3 жыл бұрын

No support screws for the heater block. Double edged sword I guess. Less heat travel but easier to damage hotend when tightening nizzle

@jswallet 3 жыл бұрын

Great as usual! Is there any type of PID or other tuning that needs to be done after changing hot ends?

@hansstraat1978 3 жыл бұрын

Did this with a Swiss DD drive also on a CR-20 (ender 3 compatible). Works awesome. Also for tips where to buy stuf, please include Europe :) also (am from the netherlands

@j9999i 2 жыл бұрын

Hello Bryan, thank you very much for all you are doing. You are a big reason I bought my Ender 3 V2. Since it has been almost 2 years since you published this video, is this still the best all around All Metal Hot End for the V2?

@ChefDansHookah 2 жыл бұрын

Good morning, Mr. B. I just started watching your channel, would you have a video on replacing the hotend of a Sunlu S8 with the same part? Thank you kindly, I hope all is well.

@Tbaz777 3 жыл бұрын

Great video thanks Brian. Is this also compatible on the Elegoo Neptune 2? I'm inclined to think it is.. your input would be appreciated

@BV3D 3 жыл бұрын

Hi! I cannot be 100% certain, but the images I've seen of the Neptune 2 hot end look exactly like the hot end on the Ender-3 series, so in all likelihood it would work.

@Tbaz777 3 жыл бұрын

@@BV3D Thanks for the response and the great videos

@jesser9528 2 жыл бұрын

I just upgraded my hotend to all metal hotend on Ender 3V2. I am using Cura 4.11. I mostly run PLA a little PETG. I was wondering what you are using for retraction distance and retraction speed settings? Is there anything else I need to change?

@colly05 3 жыл бұрын

Brian could you tell me where I can find the stl files for the front loading spools please

@3dprintingcave778 3 жыл бұрын

great video i subscribed

@d.b.cooper8878 3 жыл бұрын

Thanks for the discount code, helped me make my decision that much easier! 😂 Great videos as well, super informative for a noob like me!

@BV3D 3 жыл бұрын

Awesome! Thank you!

@philipmajor5425 2 жыл бұрын

Hi Bryan, loving the stuff you put on. Helped me loads. Question, on your Ender 3V2 you have a different assembly for the spool holder pointing forward. Its great, where can I get the .STL files to print it.

@gediba 3 жыл бұрын

Great video! If I upgrade to an all metal hotend, do I need a better ptfe tube (carpricorn for example?) to go up to 250-260 or not?

@BV3D 3 жыл бұрын

Hi! While a premium PTFE tube is nice (they're usually more precise on the inside diameter), it's not necessary for this hot end. The tip of the PTFE tube only goes into the heat sink a couple of millimeters, so it doesn't get hot enough to get damaged even at 250-260˚C.

@gediba 3 жыл бұрын

@@BV3D nice, thanks for the clarification :)

@AndrewAHayes 3 жыл бұрын

Bryan do you know of any conversion kits for the Ender or CR printers to allow the fitting of a volcano or V6 hotend?

@ritterdan 2 жыл бұрын

Nothing as trouble with the Micro Swiss All Metal Hot End for me. Molten PLA is leaking everywhere and burns in on the heater block, even after I cleaned everything and tightend the nozzle to the hot heater block. Would be great if you could do long term tests of upgrades to test if they may have flaws. Sadly it was a expensive experience for me to follow your recommendation.

@DadsterFlip 3 жыл бұрын

Is it a big must to upgrade the hotend?? Who many here has the z axis upgrade? The block that sits on top of the rod. Does it make a different?

@dragoshiuk 3 жыл бұрын

Hi Bryan! Love the video. Extemely clear, very informative, and very easy to follow. Definitely subscribed!

@dansmith9406 3 жыл бұрын

Hi Brian. Great video as always! I'm going to do this upgrade to my v2 but I'm wondering, would you recommend a direct drive all metal hot end or just the hot end? Thanks

@miccr2655 3 жыл бұрын

What is the best 3d printer for lithopanes ?

@passtheboxfox5374 2 жыл бұрын

Just wanna say, nice shirt!

@twotonez1141 3 жыл бұрын

Great video. I'm interested in the side mounted spool holder. Do you have a video or something about that mod?

@robertwillemsen368 2 жыл бұрын

Hi Brian, thank you. Do you have a link to the spool holder you are using here? Looks perfect to me

@stelonous 3 жыл бұрын

Question, aren't you supposed to back off one of the items and then tighten it when heated? I thought it was the nozzle. Go to till tight, back off like a full turn, heat, and then tighten.

@WhamBamSystems 3 жыл бұрын

Dont you wish someone would make a heater cartridge with a 90 degree bend after the cartridge so one is not stressing the wire connections?

@jcoghill2 2 жыл бұрын

What do you do when your hot end doesn't have any screws? There is a microscopic set screw that holds the heater and thermistor.

@salmanslim 2 жыл бұрын

Will this work on aquila?

@coookietm 3 жыл бұрын

just swapped my micro swiss for an e3d volcano because the microswiss eventually gives into repetitive heat creep despite hot tightens and thermal paste be ware