The video is no longer available

The video is no longer available

Did you ever find one? Would love a link if you did. I’ll keep searching

With the micro usb charging cord it comes with you plug it into the same place you plug the horn in

@@papijanice1709 Cheers for that

@Hunter Ansorge nope im just asking

Not sure it matters exactly how you mount it as long as the receiver comes within 3mm or so of the sensor. I haven't done a calibration, so can't help you there. Maybe someone else can chime in.

Long press for 5 sec the + and - buttons on the computer and you should get directed to the initial set up, if this is what you need. You need there to specify there you wheel circumference of your bike, else you will get a wrong speed. Works well for me, I had no problem with the setup. Ask me if you need more info, I can also send you the manual. Btw, I have one of these bike computers and when I try recharging it by connecting it via an USB cable to my laptop the horn is being triggered! Do you know how I can recharge the damn thing without sounding the horn?

Noname Noname yes I can get to the field to increase the tire circumference it just doesn’t save what I store. Unplug your unit from the horn when charging and you will be fine.

@@nonamenoname2618 I'm sorry to say that i do not know how to specify my wheel size

I have a similar light and on the manual it tells you what to set it to based on your tire size

I also have same question

Same

Same here. Too loud.

ME TOO!!! The instructions are god awful. I have the sensor and magnet lined up and only 1 to 3 MM apart and it's not reading it. WTF. Junk chinese crap.

Unfortunately not, as I have not attempted to do that.

Hi Angela, I just figured out the speedometer. It has to be really close to the magnet. So the piece has to be strapped so that it is on the inside of the fork. Test it before you strap it tight. Going to see if I can attach a photo. If not, send me your email or Facebook messenger profile name and I’ll send you a picture.

Thanks. I know how to get to the field where I can increase the tire circumference but it does not save. Not sure what I have to press to save my tire circumference of 220??? I don’t have a problem charging. However I take it from my bike and unplug the horn to charge.

DONT USE A DATA CABLE!!! Use a USB Charging cable that just gives power.

I haven't attempted that, sorry.

I am having the same problem. Every time I set the tire circumference it seems to default back to 208. The SET and MODE buttons don’t seem to operate properly.

Long press for 5 sec the + and - buttons on the computer and you should get directed to the initial set up, if this is what you need. You need there to specify your wheel circumference of your bike (circumference = 2*Pi*radius), else you will get a wrong speed. Works for me well, speed is accurate. Ask me if you need more info. Btw, I have one of these bike computers and when I try recharging it by connecting it via an USB cable to my laptop the horn is being triggered! Do you know how I can recharge the damn thing without sounding the horn?

@@bobpretto1330 Strange, I don't encounter this problem. My circumference is being successfully stored and the speed is accurate. Are you sure you have followed the instructions manual properly? I can send you my manual with an email, if you want. Btw, I have one of these bike computers and when I try recharging it by connecting it via an USB cable to my laptop the horn is being triggered! Do you know how I can recharge the damn thing without sounding the horn?

Noname Noname I would love a copy of your manual as mine is not detailed at all. What buttons do you push to save the wheel circumference? Btw, not sure how the horn can go if you disconnect it. Try plugging into another USB port not on your computer.

Hi, cant work out how to turn volume down. It could cause industrial deafness. The KZfaq link doesn't work

I have one of these and I also haven't figured out where to restart

I only figured out where restart all configuration, holding both bottons +/-

Have you figured it out? Mine does not work either.

@@patriciacuti7516 my horn failed after one day. I contacted Amazon and they immediately sent me a new light and horn, and the whole box. Now my only problem is that the distance is not correct. It is calculating about 4 times more than my actual distance. Can anyone tell me how to change the distance? Thank you.