Installation and Use of Ortur Y-axis Rotary Chuck

No video

Installation and Use of Ortur Y-axis Rotary Chuck

Рет қаралды 12,915

Күн бұрын

· Multi-mode Y-axis Rotary Chuck.
· The elevation angle can be adjusted 180°, the rotation is 360° without disassembly.
· Can be used to rings, cups with handles or irregular items, etc.
· Engraving accuracy 0.45°, engraving diameter range up to 120mm.
· Aluminum alloy material, one-piece structure.
· Easy to install, sturdy and reliable.
Purchase link:
ortur.net/
Join us to earn commissions:
affiliate.ortu...

Пікірлер: 42

@ivansilver1330 9 ай бұрын

thankyou so much,,, it kept leaving lines so i copied your settings,,, brilliant

@orturnet 9 ай бұрын

Glad that everything goes well.

@Thomas-hm7tw 2 ай бұрын

Is it compatible with atom stack s20 pro?

@StravidesUk 7 ай бұрын

What is the correct mm per rotation setting - or how do you find this out ?

@orturnet 7 ай бұрын

Please check 9:44 of this video, mm per rotation=96

@StravidesUk 7 ай бұрын

@@orturnet that's for the 3, does not work for the lm2 pro

@orturnet 7 ай бұрын

@@StravidesUk The setting is the same for all machines on LightBurn.

@StravidesUk 7 ай бұрын

@@orturnet Apologies - I should have read the manual better - in the manual it states that OLM2 AL1 AL2 I need to enter 120 - so I followed that ;)

@ramaroodle 4 ай бұрын

I have your rotary chuck and love it. Wondering if it's possible to hook it up to the x-axis instead of the axis so it aligns with the left to right layout of my NEJE Master 2.

@orturnet 4 ай бұрын

Hi, I'm sorry, but the YRC can't be connected to work on the X-axis

@HEX-A-PAWS Жыл бұрын

I have the Ortur Master 3 and Ortur Master 2 connected to Ortur chuck rotary. How do I navigate both lasers without disrupting settings in Lightburn?

@Gab7mx 3 ай бұрын

Hello How can I make the design align correctly to the center? I have everything correct according to your instructions and the measurements when recording the design come out well, the only problem I have is if I want to center the design For example: I have a 5 cm rectangle and when I center the laser on the design it is not the 2.5 cm it should be, it goes too long. I would appreciate your help ortur team, thank you

@orturnet 3 ай бұрын

Hello, just need to set the parameters in the engraving software before using YRC, but need to send you the manual file or screenshot, you can contact support@ortur.net email, my colleague will help you you!

@Thomas-hm7tw 2 ай бұрын

Es compatible con atom stack s20 pro??

@orturnet 2 ай бұрын

Si el motor de la máquina de la que hablas es también un motor paso a paso de 42, el ángulo de paso del motor tiene que ser de 1,8 grados y la resistencia de 10 ohmios, para que se pueda adaptar

@darciecarpenter4887 8 ай бұрын

When i add the 1mm to the X & Y pos it positions my image to just outside the top left corner, instead of the inside of the lower left corner like in the video. What am I doing wrong

@orturnet 8 ай бұрын

Change the job origin to the left corner.

@hawknot9045 5 ай бұрын

Es compatible con la cortadora láser de Unit Electronics CO2-4040?

@orturnet 5 ай бұрын

Sorry, we don't know much about Unit Electronics CO2-4040

@sergio-r-gbrexy-r-g6956 9 ай бұрын

Buenas, sabeis si el eje de rotación es compatible con Máquina de corte y grabado láser CO2 Flux Beambox

@orturnet 9 ай бұрын

Sorry, we can't make sure that.😔😔

@soygordon6792 7 ай бұрын

Hola como puedo hacer para que mis trabajos no me salgan con rayas, es que mi rotatorio no hace bien fluido los trabajos y siempre me sale con rayas raras

@orturnet 7 ай бұрын

Hello, please contact our tecjnical support for help, better to provide with pics or videos so that they can comfirm the problem more easily: support@ortur3d.com

@evaalmadalopez3728 20 күн бұрын

I Need tutorial for software láser grbl

@orturnet 18 күн бұрын

Hi,you can watch this:kzfaq.info/get/bejne/rtNhhNyrlsmZeY0.html

@compdad 10 ай бұрын

I have a Ortur Y-axis V 1.0 Rotary Chuck and a TwoTrees TS2 and command $141 is invalid. 120mm per rotation is no good and nether is 96. Testing and playing it appears that 117mm per rotation suits my configuration.

@orturnet 9 ай бұрын

🤩🤩This is so cool, thank you for your patience in trying it. I'm really happy for you to hear that you were able to find the parameters which suits your configuration. I hope you can maintain your love and continue to enjoy the fun these things bring you.😘😘

@jimhribnak2671 9 ай бұрын

I have done the $22=0 and I still get an error 9 I have the LM2 Pro. I have had my chuck device for months and havent really got it working properly. I had t working once last nite but could not get it to work everything was backwards (even though I turned on mirror in the rotary setup section

@orturnet 9 ай бұрын

🥺🥺I am so sorry to hear this. If it is convenient for you, you can record a video of the relevant issues. Send the video with the email to our email 👉support@ortur.net. We have professional technical staff to help you check the video to determine the cause and help you solve the problem.🤗🤗