Рет қаралды 61,739
Buy Bike Computer «SunDing SD-558A»: ali.pub/u678m
ali.pub/m712o
Key 3 modes of operation:
1) DST mode;
2) TRIP UP / DN - trip mode "in both forward and reverse-year";
3) ODO - query mode.
Mode selection is carried out in a central button logo "SunDing", referred to as MODE.
If you hold the right button SET for more than 3 seconds to turn the settings calculation values:
- Temperature (C or F);
- 12/24 hours mode;
- Wheel circumference ratio - the length of the wheel circumference (in accordance with the table - can be measured by a tape measure on a tire circumference);
- The distance (kilometers or miles);
- Odometer readings (from 0000 to 9999);
- RAT timer (0 to 9999);
Main functions:
1) CPD - velocity (0.1 to 99.9 in increments of 0.1);
2) CPD COMPARATOR (up or down arrow on the display shows the excess or under-speed relative to your average speed in this trip, calculate the computer);
3) the ODO - Odometer - the total distance of all trips (the whole story - you can make to your computer's memory a total distance of the other, previously used computers) (0 to 99999);
4) DST - total distance of all trips only with the computer (from 0 to 9999);
5) MAX SPD - maximum speed;
6) SPD AVS - Average speed;
7) TM - total time spent only on movement, with the computer;
8) TTM - the total time of your computer (the counter counts from the start of the first trip) (from 0 to 99:59:59);
9) the RAT - the total time of all trips (the whole story - you can make to your computer's memory while the movements of the other, previously used computers) (0 to 9999);
10) STOP WATCH - Stopwatch (runs in DST and ODO modes; left button UP - start / pause, right SET button - on / reset);
11) SLEEP MODE - sleep mode is activated after 5 minutes of computer inactivity, is derived from this mode by pressing any key or by starting the bike movement;
12) OVER-SPEED REMINDER - when exceeding the speed of 20 km / h on the display flashes until the CPD sign reduce speed below 20 km / h;
13) MAINTENANCE ALERT - odometer value in excess of 300 km on the screen flashing wrench symbol - a reminder of the maintenance;
14) CARE REMINDER - in excess of the value Mileage 300 km on the screen flashes the sign of watering and butter - a reminder of the need for lubrication;
Simultaneously pressing the UP and MODE flashing signs stop.
15) The auto - in the twilight by pressing any key activates the backlight. Hold the MODE button for more than 5 seconds activates / deactivates the backlight in / out mode (a) a constant glow.
16) Hold the SET button to the right for more than 3 seconds, puts the computer in a circle configuration mode (switching parameters are SET button, change the value of the parameter is carried out left-UP);
17) Hold the left button UP for more than 3 seconds, the fading (save in the display) reading values on the screen.
Tuning Mode TRIP UP / DN see in the box.
▶️Buying on Banggood.com: www.banggood.com/index.php?zf...
▶️Buying on AliExpress.com: a.aliexpress.ru/_AbRF5R
✔️I invite the webmaster to connect to ePN: epn.bz?ref_type=epnbz&inviter=7eb9b
✔️I invite the user to connect to the Backit cashback service: backit.me/ru/cashback?ref_typ...
It allows you to return part of the money from all purchases on the Internet!
✔️To connect the Yoola affiliate media network for earning on KZfaq.com: yoola.app/r/6115825026464
✔️ Watch the video and subscribe to the channel "TheBelovHouse":
/ thebelovhouse
#bicyclecomputer #sunding #aliexpress
✔️Financial support for the development of the channel:
PayPal paypal.me/TheBelovHouse
WMZ Z113787826694
Donate here: www.donationalerts.com/r/theb...
☺СПАСИБО! THANK! ДЗЯКУЙ! GRACIAS! GRAZIE! OBRIGADO! MERCI! 謝謝您!