Installation of CHINT DTSU666-CT (SOLAX) meter and current clamps (ENG)

Рет қаралды 23,540

Күн бұрын

In this video, you'll find step-by-step instructions for connecting the Chint DTSU666-CT meter to your SOLAX inverter. You'll also see how to install the three-phase clamps on the wires of your electrical panel.
Test our online configurator here: www.alma-solarshop.com
One click and you'll find the best solar panel solution at the best price. Install your solar panels for self-consumption at the best price with Alma Solar. The panels are installed by our specialized partner.
------------------------------------------------------------------------------------------------------------------------
Chapters
00:00 - Unboxing CHint DTSU666 meter
00:10 - Connecting the three supply phases and the neutral conductor
01:24 - Current clamp on phase L1
01:56 - Current clamp on phase L2
02:18 - Current clamp on phase L3
02:49 - RS485 connection on SOLAX inverter
03:16 - Outro Alma Solar

Пікірлер: 10

@georgeesselink7622 26 күн бұрын

Thank you for the clear instructions. the manual is very bad so i had troubles to get it working. With these instructions i got it working.

@almasolar9176 26 күн бұрын

Yes thank you, it's why we are continually integrating new video to setup or install our inverters. Thanks for your feedback

@BoRn0XX 13 күн бұрын

Why is a cable cross-section of less than 1.5mm² recommended ? I used 1.5mm²

@almasolar9176 12 күн бұрын

It's recommended because the port is very small but if you connected with 1,5mm2, there is no problem

@samomara1256 Ай бұрын

L1 is brown and L3 is grey

@nadeemulhaq2003 2 ай бұрын

can i attach any smart meter with Solax Inverter to check Import/Export in Solax APP. Solax Recommend Chint EPM meter., DTSU666-CT(with solax logo) but if i use some other model as example یعنی وہ میٹر جو امپورٹ اور ایکسپورٹ کا ڈیٹا رکھتے ہیں کیا سارے چل جائیں گے ؟ Normally smart wifi , bidriretional Meters 3 phase in china +10000 Pak Rs 10k to 15k Rs Now not sure will work with solax or not ?

@almasolar9176 2 ай бұрын

No you need to use the meter sold by SOLAX. You will not have the right datas if you are using your own one

@informativevedios2847 Ай бұрын

@@almasolar9176do u have this device.. I want to install it on my solax on grid 10kw inverter. My inverter giving me fault meter fault . Pls guide

@informativevedios2847 Ай бұрын

One more thing my inverter port is RS485 not a lan port how we connect this device to inverter than?

@almasolar9176 Ай бұрын

@@informativevedios2847 Which inverter is it? you should Meter port dedicated for your meter.