Installation tutorial for BIQU B1

Рет қаралды 37,829

Күн бұрын

1. Appearance: The violet color makes its appearance more attractive
Independent chassis and 2040 aluminum profiles
2. Motherboard: 32-bit motherboard SKRV1.4 to facilitate DIY
3. Driver: TMC silent drive series
4. Screen: BTT TFT35 V3.0
(1)Marlin mode & Touch screen mode
(2)15 languages
(3)Modes can be switched as needed
(4)Model preview
(5)Real-time monitoring data (temperature, progress, height)
(6)G code can be sent on the screen
(7)The color of RGB can be adjusted according to preferences
(8)Support downloading models via TF card and U disk
5. Steel: BIQU SuperSpringSteel
6. Interface: BLtouch
Smart Filament Sensor interface
BLtouch bracket
Integrated adapter board
Type-C
7. Nozzle: The nozzle shell is detachable (easy to replace parts)
RGB can be DIY
More about B1: • BIQU B1: 32-bit Dual O...
FB Homepage: / biqu3dprinter
FB Group: / 1680600228892779
/ 721158168658899
Twitter: / biqu_3dprinter
AliExpress: es.aliexpress.com/item/400119...
Banggood: banggood.app.link/l0GZFdJE67
If you want to become a distributor or order in large quantities, please contact our sales: luciano@biqu3d.com!

Пікірлер: 29

@georgiescott1387 3 жыл бұрын

Great, clear instructions! My only suggested improvement is @22:50 when you snip off the excess cable tie ALWAYS snip it off flush hard up against the cable tie end. Those little tags like the one you left are really good at slashing the inside of your wrist or forearm when you reach behind something - like the z axis rails. Well done! I got my B1 late this afternoon. I can't wait to assembly mine tomorrow morning!

@CMDRBlueeagle66 4 жыл бұрын

Okay I'm sold. I have have a BTT SKR 1.3 and five BTT 2209's, along-with a BTT Smart Filament sensor on my heavily modded AM8. I just ordered the Biqu B1!

@yuboqiu1089 3 жыл бұрын

can you make a version without the background track? gets annoying after the first 5 repeats.

@eusojedrevadnal3181 2 жыл бұрын

I'm SO eager, I'm about to unboxing it

@speabs 3 жыл бұрын

Very helpful, thanks!

@MrYellowicz 2 жыл бұрын

I'm very sad. I bought a BIQU B1 printer today, but in Poland there are no purple ones and I have a regular black one.

@OscarvanDriel 4 жыл бұрын

Seeing this and reading about the biqu makes me thinking of buying this with my 10 year old son and start to learn more and getting into 3D printing. Just need a little push so if anyone else recommends this one please let me know.

@MrKierkegaardfiteen 3 жыл бұрын

You should just buy it i think. It is relatively cheap and in the worst case that it somehow stops working before warranty at least you had some fun and learned how to 3D print stuff!

@mr_hidir1965 3 жыл бұрын

How to update software. Could you please share or post resources

@friacagames4681 2 жыл бұрын

Como faço para ativar o reinício em caso de queda de energia?

@Leonadamwijaya 3 жыл бұрын

Why my heatbed can't heated..and getting heated failed issues and comes eror : printed halte (kill) ...please help me..answer it soon

@eusojedrevadnal3181 2 жыл бұрын

Is this printer compatible with 0.1 and 0.2 nozzles? Because I can't find on the web

@frequencylim 3 жыл бұрын

One question: I review lot of videos on 3D Printer setup. Why most builder never use threadlocker (e.g loctite 243) on the screws. I thought 3D have lot of movement and all those factory screws doesn't coat with threadlocker?????

@kennethlung3371 4 жыл бұрын

I have a couple of the Ender 3 Pro's and a JGAurora A5. They are good but I feel the B1 is going to be better. I hope to receive my new printer on 8/4/20. I know it is going to be much better. KD4HQQ

@TravisPickle 3 жыл бұрын

how do you setup the z limit switch? Cant seem to get it right on my B1

@heroofharo 2 жыл бұрын

You ever figure it out? I can't get mine either.

@glennetchart7078 2 жыл бұрын

My new BIQU BI 3D printer will not go to Z axis in calibration after even reset M502 is there another total reset to original configuration that will allow me to go to Z and start Calibration before levelling? It won't go to Z now so can't really proceed to levelling. Help.

@VanCoreRecords Жыл бұрын

Buenas tardes, necesito ayuda con mi biqu b1, desde que la compre que no puedo dejar que imprima correctamente, el desplazamiento del eje Z no es nada suave, se va trabando en el camino, probe aflojar la tuerca de laton de 4 tornillos y tambien de dejarla apretada, distintas posiciones del acople rigido, probe un acople flexible (el cual mejoro el desplazamiento pero por alguna razón en la primer capa de impresión esta queda aplastada. Por favor necesito su ayuda

@satyabrotobiswas9876 3 жыл бұрын

sir alibaba biq official store link, you can give me?

@eusojedrevadnal3181 2 жыл бұрын

I need help, I just bought a BIQU B1 and the extruder doesn't work, all of the axis work and the entire machine but the extruder doesn't work please I need support

@tobenuwu 2 жыл бұрын

Have you tested going to Menu > move > extrude and tested loading or unloading filament to check if the motors work? (note that in case of loading you need to heat the extruder in oder for it to be able to feed more plastic). You can also do this without any filament and see if the motor spins. If you can't figure out what's going on hit me with a message here or give me your discord ID so we can make a call and see what's going on (Btw, I'm brand new to this too and don't have a ton on knowledge, but maybe I can help :D)

@eusojedrevadnal3181 2 жыл бұрын

@@tobenuwu thanks for your support, I could solve the problem. These chinese dudes didn't plug the E driver into the motherboard 🙄

@hunterbeachcowkk7hqy786 2 жыл бұрын

200 like

@Therryaljonas 4 жыл бұрын

Easy !

@eldiablo3124 Жыл бұрын

I'm so pissed it said nothing about coming in a million pieces. Never buying from them again.

@ismaelnasser6360 10 ай бұрын

Yes it's headaches and her English isn't clear

@eldiablo3124 Жыл бұрын

Yeah don't fall for this the set up was nothing like this video huge scam. Got the whole thing assembled just like they said and....it started ripping it self apart and making crazy noises .