Whts it look like

Thank you and thanks for watching.

Thanks, I will be adding many more. Please feel free to provide feedback.

Your correct

I believe I just kept going around it and scoring it with a retractable razor knife like you would get at a hardware store.

Oooh ok that's sounds like it would work and be pretty simple, thanks for the fast reply!

Not too bad because the material is already thinnner around where you make the cut just for that reason.

I beleive it is scored from the factory. So you just keep going around it with a razor knife until you cut through and it pops right out.

Bolts right up. No additional bracket. We now sell KFI ones for Polaris that are plug and play

Correct. I stated that but I wanted a cleaner look so cute it out so I had a smaller opening around the winch.

I looked at it last night and the wires pass around the outside of the radiator and then a ways behind it. They are not touching the rad and one of the wires are in a loom. I have had no issues. The stock voltage regulator and wires for it are closer than my winch wires. No issues.

Mark Paez Jr pretty much plug and play. Red goes to positive black to negative.

You would need to find a mount kit for what ever winch you purchase. Then do your own wireing. That is one reason I just went with the Polaris one. Plug and play.

Doug Penner all you need is the Polaris mounting plate but any ATV/UTV winch will work. My question is if the orange wires are your ignition wires in a 2017 sportsman

I used a multi meter on the post terminals under the cover in the storage box to see which one had power when turning the ignition on. If you follow my video I installed it on the that one.

Hi Doug. I wanted the Polaris winch for the simplicity of wiring and mounting, as everything is already plug and play. That said, up here in Canada the dealership wants nearly $700 for a 3000 lb. winch kit. I went on Amazon.ca, purchased the mounting kit for $50, went to Canadian Tire and bought an ATV winch (4000 lb. Warn knock off made for Canadian Tire) for $150 on sale, went through Amazon to upgrade to a synthetic rope ($35) with a line stopper ($12) to make it lighter and less prone to rust. Because this was an actual atv/utv winch, it came with the mini rocker switch and everything needed to do a stealth install. It took about 45 minutes to mount and set up the winch in the bracket with the fairlead. (The Polaris bracket also comes with hardware). The only drawback is the wiring included is longer than needed, as it is designed to go to the back where most manufacturers put the battery. You can either loop it up or shorten it and install new loop connectors. Following the above video, it is a snap to install and I saved over $400 from using the Polaris set-up. The only difference is when you choose a winch, the Polaris mount is designed for the universal 4 hole mounting pattern. Make sure the winch is going to line up. Also, Polaris winches for the 570 are inverted from the factory, so conventional winches will mount upside down. No biggie, just the stickers will be upside down and you need to run the winch line completely to the end and re-set it in reverse (or just be aware that the button in/out will be backwards). Saved a ton, for a little bit of extra work, and got an extra 1000 lb. capacity (overkill).

@@MrMjrRage I'm also in Canada (BC) and its outrageous how much polaris wants for a winch! I havent bought the machine yet, just getting ideas of add ins! The 570 premium here is $9555 plus the tax.

Could have but I did not. Always safer if you do.

@@gobigparts Thank you great video.

@@gobigparts I did the same way you installed yours this afternoon, worked perfect. Only issue will be the 100 hour diff service, I will have to unbolt and pull winch forward to access the fill plug..

I missed that. Yes, always disconnect your negative cable from battery.

shaun schollaert You noticed that. My wife always correcting me. Lol. She can be a real wench then I have to use the winch. The quad that is.

I have a comercial account through my dealer. I can quote one for youif you would like.

Go for it

Shoot me an email at randy@gobigparts.com and your zip code.

Love it.

@@gobigparts no issues at all?

Yes Polaris winch like package shows.

Missed that part awesome thank you

Yeah, I need a different camera I think that can have an external lapel mic or something plugged in.

Probably just like all of our gear.

@@gobigparts ! All you conservatives hate Socialism, but don't mind giving American Bucks to a Communist country! LOL!

@@j.whisper2379 not everyone in the US is a conservative.

@@gobigparts ! So, are you a liberal? Many people that are partial to mudding with ATV's are from the South. At least that is my impression from the videos. The south is a big part of what we call the bible belt. The bible people tend to be conservative, anti vaxxing, science hating, climate change denying, evolution deniers who support Trump. Look at Florida and Texas. But as long as you can get your toys from China, things are cool??

@@j.whisper2379 I usually shy against political talk on my youtube channel, but if you want to send me an email feel free. I don't live in the South much further North. YOu can find my email address on my gobigparts web site.