Installing a Fiamma F45S Awning on a Van or RV with Unaka Gear Co. Installation Kit

Рет қаралды 15,320

Жыл бұрын

Join Dan as he demonstrates how to install a Fiamma F45S awning on a van or RV using the Unaka Gear Co. installation kit. In this video, Dan walks you through the unboxing process and explains how to purchase the Unaka bracket kit to install the awning directly onto your roof rack. He also highlights the convenience of the roll-in T-nut, which can be purchased directly from Unaka Gear Co. Follow along as Dan provides a step-by-step guide to installing the Unaka bracket to the Fiamma bracket, making the installation process easy and efficient. Don't miss this informative video for a seamless awning installation on your van or RV!
Tool List:
- Knife / Scissors
- 3/16" Allen Driver / Wrench
- Drill with 3/16 or 5mm Drill Bit
- Small adjustable wrench
- Ratchet Wrench with 1/2" socket and 10mm socket
- Phillips Head Screw Driver (PH2)
- Torque Wrench with 3/16" Allen Driver
Fiamma F45 Awning: unakagearco.com/products/fiam...
Unaka F45 Awning Bracket Set:
unakagearco.com/products/fiam...
Roll-In T-Nut: unakagearco.com/products/copy...

Пікірлер: 16

@dougtarter8713 Жыл бұрын

another very informative install video guys! Keep them coming!

@unakagearcompany 11 ай бұрын

Thanks Doug, we'll do our best.

@dariogonzalez1894 10 ай бұрын

Wow!! #ConanOBrien really knows his awning installations!!!

@chrislewis5150 Жыл бұрын

We love the Unaka rack on our Promaster! Do you guys sell the F45? If not who would you recommend? Thanks

@unakagearcompany Жыл бұрын

Hey Chris! Yes we do sell the F45s and F80 models! Here is the link unakagearco.com/products/fiamma-45s?variant=41902706753755

@RoamtechVans 4 ай бұрын

Great vid! what are the torque specs for the roof rack bolts? I can't seem to find it anywhere.

@unakagearcompany 4 ай бұрын

Great question! We are working to add these specs to our torque manual on our website. In the meantime: - the M6 bolts that go through the Factory Fiamma bracket should be tightened to 26.5 inch-pounds (3 N/m) - the 5/16-18 hex bolts securing the Unaka adapter bracket to the 8020 should be 132 inch- pounds or (18.49 N/m) and we recommend using loctite

@dhflies 11 ай бұрын

Will the bracket adapters work with the "Explorist Life" roof rack and solar panel installation?

@unakagearcompany 11 ай бұрын

Yes, they certainly will. Just select the Transit HSLD - All Models selection when you select your awning brackets. You will then get a set of spacers that rest between the top of the 8020 adapters and the bottom of the awning bracket to get everything to line up correctly. If you have any questions at all please email csr@unakagearco.com or give us a call or chat us on our website.

@taylorutt1488 Жыл бұрын

Doe the mounting brackets have to be spaced equally apart from each other for proper installation? or can they be mounted where they fit the rack?

@unakagearcompany Жыл бұрын

We typically try to install them within the recommend range that Fiamma specifies, but that doesn't mean they are equally spaced. You can slide the brackets forward or backward as you need to if you have to get them in front of, or behind a cross bar or splice plate. If you have more questions, email us at csr@unakagearco.com!

@williamshorter8712 9 ай бұрын

❤❤❤💯💯💯💯💯💯💯

@vrslider 4 ай бұрын

Anywhere avaialable in the EU ? love the roofrack what brand is this?

@unakagearcompany 4 ай бұрын

The roof rack is a Unaka Gear Go HSLD Rack. We designed and manufacture that rack. We do ship our racks to Europe. The awnings are manufactured in Italy, so I am sure you can purchase one and have it shipped to you from a European supplier. If you have any questions email us at csr@unakagearco.com.

@cwallen19803 6 ай бұрын

Can the awning be installed so it fully covers the side door, tha is, more forward?

@unakagearcompany 6 ай бұрын

The awning can be adjusted forward or backwards as needed to get your desired fit with in reason. Your limitations may be your van roof, the Fiamma recommended mounting locations, or your rack. This is more difficult on the Ford Transits as the main curve of the roof extends back fairly far. Some customers have done it, but it may put you outside of Fiamma's mounting recommendations and put extra cantilevered on your rack which is not advised.