What a perfect installation!

very good, cable techs are always getting better and better. that young guy did a great job and should get a raise for hard work!

We use the same NID at my company lol. But nice work guys! Looks exactly like how I do it!

The internet man and camera man did great👍.

Very nice, neat, clean installation. As a former electrician, I recommend ditching the ratchet PVC cutters and getting a battery powered mini-bandsaw. No, flared ends from dull blades. No busted pipe on cold days. But most importantly, reduces worn out thumb joints and carpal tunnel syndrome. Trust me, it's no fun not being able to hold onto things or pick things up with your thumbs and fingers. PS- a mini-bandsaw comes in handy for all sorts of things.

Our local Fiber ISP, Frontier (formerly Verizon) uses premade cables to just plug into socket at the street and a the demarc location.

There's a small square with a set screw about 1" above your 2 white antennas. In our boxes they make us slip those 2 antennas into that small square with the set screw. That's why they built it like that, instead of having to hold it in place with your own clip and screw

Very nice craftsmanship. Only comment is you should use PVC primer and cement on all joints and couplers In a few years the ground will settle and the fittings will come apart and possible damage the cable

Good job

Very good

Grate job 👍🏻👍🏻

Great job

Beautiful

The seal is in the way of the rubber grommet that surrounds the fiber it makes for an easier install.. if u take note to entrance port of this nid the rubber boot above the conduit goes behind this weather seal.. so u must remove it, install the fiber an reinstall the seal..

What model/brand NID did you guys use here?

Nitpick: 5:40 ish he should have left more of the black sheath. It’s a failsafe against a fiber break occurring at the base of the strand right where it enters the slack nid(the box he mounted). The conduit work is flawless.

Wonderful

Begitu rapi 😘, coba kalo di indo

How would you go about digging up a fiber line? Have a pool construction project and fiber line needs to be rerouted and hung on the fence line so that contractors can dig trenches for drainage/electrical on the same side as the fiber line. I can see my fiber line sticking out of the ground right next to my flowerbed (like 3" below surface level) where the fiber line runs into the green electrical box in the back corner of my lot.

Good, but don't forget to use flush cutter for tie wraps,, no sharp edges is allowed,,

What kind of router can I get for this kind of internet I'm getting ours installed soon

Good

Looks beautiful, it’s embarrassing seeing how some Comcast Xfinity and AT&T fiber installations look

At this point is it ready for the indoor installation of the router box?

Looks good, would love to see a video of the fibers being terminated. Also I think maybe it would be a good idea to strap that conduit to the wall of the structure no?

Hey what is that tool you used to strip the fibre the blue one? I’m just getting into the installs and we just use side cutters. Pls help me out

I asked the provider why there is a ground rod and wire with fiber optic cable. They said it is so they can trace the cable in the ground.

If I wanted to get into this field, what topics should I study for the required test I keep seeing on the application?

Landscape orientation is your friend when making video.

Very good job! I like the NID you guys use, ours is a little too small to work comfortably in. Do you guys fusion or mechanically splice?

Wait! where does the cable come in from? It looks like it's under an inch of mulch/leaves.

Help here please! If the cable get broken, can it be spliced somehow? I was digging to put a tree and ended cutting the cable. I try to figure it out and noticed that there is like a clear tube with some kind of gel and i think there might be a fine cable inside. Where can i find or what is called this cable to do it myself if not will have to call the internet company. Thanks in advance for any information.

U hope they don't just randomly drill through the wall, wires, plumbing and furniture like some companies do and don't even bother to seal the hole!

why did you take the weather strip put?

On the inside of the property does the need to be a circle box? 🤔

Bro in which country are you doing work

Why did you take the gasket out of the box?

Is that traceable drop? I didn't see you terminate a trace wire anywhere.

What company do you work for ? Spectrum ? I want try as well

what if there is no fibre line coming from the ground? what is the blue thing you used to scrape off the wire? and this is only installing NID right what If we have to install the fibre internet for client how do we do that?

So no need to use cement on the pvc pipe?

What about the connector? Is another tech going to follow up?

where can i buy one of those boxes for the outside of my house?

What kind of optical cable to use for 700 ft from my home to barn? I have At&T FIBER at the house but need to distribute out to the barn. Single mode, multimode?

Why did you cut the other two

Not very deep in the ground?

meanwhile, spectrum does not even use a PVC pipe for that work. and Frontier would simply drill into your house's sidings and drop a wire inside without putting a utility box outside to protect the hole they made from the elements (except for a silicone caulk)

Hlo bro where are you till saudi or....?

Shouldn't the fiber line be buried deeper?

So to switch from cable to fiber optic, I have to do major construction work, digging a trench in my yard all the way to the street? Then running fiber optics throughout my house? Good grief. Cable is good enough for me.

Which company do you work for?

The job is not complete. Nybodycan bolt a box on the wall. Let’s see you make it work!

Contractors doing a pre wire for a future ticket. not bad work, but why not terminate it? I wish i had a pre wire service as an install tech. i did everything from beginning to end.😢

so the end of the pipe in the ground just lays there in dirt not connected to anything or what lol

But why outside

Thats a different box from what we use

This service drop will be good until someone with a shovel decides to dig a hole for plantings, placement of political signs pushed into the ground, or whatever. It was my understanding a couple of decades ago that fiber would only be run to the pole and then copper to the home. I guess technology has changed again and now it's fiber all the way to the home.

I am interested in job

Check out k and s communications we do fiber everywhere !!

What a mess

Very good