INSTALLING ANGEL EYE LIGHTS ON MY MK4 GOLF GTI 1.8t *FRESH LOOK*

INSTALLING ANGEL EYE LIGHTS ON MY MK4 GOLF GTI 1.8t FRESH LOOK

Рет қаралды 6,776

2 жыл бұрын

Hi everyone hope you keeping well, here we have a guide on how to replace your headlights on a mk4 golf. This is my third set of angel eyes and they really make the car look great, I've decided this time to go to HID bulbs this time and that tops it off making the golf look a lot more modern.
www.ebay.co.uk/itm/352289194989
✘ Music:
/ chukimusic
Instrumental produced by Chuki Beats (REIGN)
www.youtube.com/watch?v=DS1U8...
#angeleyes #halolights #golfmk4

Пікірлер: 36

@AlfredoTheOutdoorGuy 2 жыл бұрын

Look amazing. Working on my mk4 golf gti and definitely looking into some halos headlights they look sweet man.

@Mk4heavenHD 2 жыл бұрын

Thanks brother

@davidriley9194 4 ай бұрын

I had a set of projector headlights but they are non halo ones! And they look so much better than standard boring original ones!😊😊

@Mk4heavenHD 4 ай бұрын

💯.. the OG’s don’t do the cars justice they should have made all mk4’s projector.

@davidriley9194 4 ай бұрын

@@Mk4heavenHD Oh the original Golf headlights are rubbish especially the high beam! Even I put LEDs in the main and it doesn’t make much difference or any brighter. Which is why I changed to projectors so I can run 8000k HID bulbs in the projector dip and LED in the main and they are so much better! I couldn’t agree more that projectors should be on mk4 golfs as standard!👍

@mitchchapman7545 2 жыл бұрын

im doing mine gold and black too mate! great minds think alike.

@Mk4heavenHD 2 жыл бұрын

Great stuff mate! Gold and black really go well, Andy at ac alloys gave me another idea this week which may change my mind tho but we will see lol.

@AH-nw8qg 2 жыл бұрын

Hi 👋, great look 👍, well done. Funny to see you use your finger as a file, to smooth the hole in the plastic trim 😁

@Mk4heavenHD 2 жыл бұрын

thanks brother, ha ha my fingers are like sand paper😁

@Birmingham_racing 2 жыл бұрын

Look better now

@Mk4heavenHD 2 жыл бұрын

Thanks bro

@ajrveedub 2 жыл бұрын

Nice video my man. You going to adjust the new headlight beam position? It's a must for new light housings. There's 2 screws on each housing for side to side and up and down adjustments

@Mk4heavenHD 2 жыл бұрын

Thanks bro, Yes I’ve done them they were pointing way too high.

@skonkmadness5716 2 жыл бұрын

Welldone butha

@Mk4heavenHD 2 жыл бұрын

Thanks bro.

@captaincarg0 2 жыл бұрын

Hey man since you are the goto mk4 man what turbo should i go for if i want power what fits and doesnt?

@Mk4heavenHD 2 жыл бұрын

Hi Mate, if you after good power 280-300bhp I would go for k03s hybrid turbo like beach buggy k280 or k300 as this can still use the normal golf mk4 decat downpipes and is less hassle. If you on a bit of a budget and can pick up a cheap k04 turbo from a bam engine then you also require the downpipe to go with it and these are good for 260-280bhp. hope this helps.

@greggould2643 2 жыл бұрын

I noticed your evap delete blanking cap on the inlet, how have you blanked the other end as I was thinking of doing it but worried about over pressurising the fuel tank.

@Mk4heavenHD 2 жыл бұрын

Hi mate good question, I initially had a one way valved pipe on there which I need to replace. I've temporarily just blanked it with a bung like it used to be back in the day I just make sure I don't fill the tank up and release the pressure every so often, I need to get another new one way valve.

@baileyduckham1215 2 жыл бұрын

Now then mate will be installing a fmic soon and just seen how much you had to cut the bumper to fit yours ? Are they all like this ?

@Mk4heavenHD 2 жыл бұрын

Hi mate, Yes they all need trimming mate. If you going big intercooler like my car then you need R32 bumper as stock bumper won’t be sufficient because the amount it would need cut out would leave you with no bumper at all lol. Yes they all need trimming mate. If you going smaller thinner intercooler you will be fine on stock bumper with some trimming required.

@tiko4621 2 жыл бұрын

Any recommendations on coolant hose kits for these 1.8t jettas?? I’ve seen the forge kits for $230, I got my aluminum coolant flange kit for $40, I figure I’ll save money on the hoses and flanges if I can haha, only place I might wanna shortcut

@Mk4heavenHD 2 жыл бұрын

I did a video on it mate go check it out. I bought some cheap ones off eBay and they did the trick. I think it’s the video titled coolant flush and is 2 parts.

@Mk4heavenHD 2 жыл бұрын

kzfaq.info/get/bejne/jqyJhJeBtK7OqKc.html

@mrdefinitely8769 2 жыл бұрын

Good to see an update to the MKIV...Honda is all kinds of yawn ;)

@Mk4heavenHD 2 жыл бұрын

Yeah it needed some attention since the Honda has come lol.

@quentincamp5576 2 жыл бұрын

What are you doing at 4:21? I have the 2.0 GL, I think mine was broke because it was just being held in by the hood release 😂

@Mk4heavenHD 2 жыл бұрын

I was removing the grille mate, I usually put a cloth on the paintwork and pry it upwards then split the hood release prongs to get it off lol.

@O1-0 2 жыл бұрын

What’s happening with the civic

@Mk4heavenHD 2 жыл бұрын

Good question mate, civic is marinating whilst I save up for a few bits. It will soon be heading over to JDK for them to inspect a few things then I will be getting into it properly.

@O1-0 2 жыл бұрын

@@Mk4heavenHD new video soon ?

@Mk4heavenHD 2 жыл бұрын

@@O1-0 Yes mate