Installing AWT Scales on my Para 3 Lightweight

Рет қаралды 5,121

6 ай бұрын

appliedweaponstech.com/produc...
At Traditional Pocket Knives, use my code "DOODYTPK" for $5 off any TPK exclusive!
AND use my code "DOODY10" for 10% off the Ohio River Jack!
www.traditionalpocketknives.c...
At White Mountain Knives, use my code "Doody3" for 10% off!
whitemountainknives.com/
At DNK Knives, use my code "doody10" for 10% off!
www.dnkknives.com/
Blade Ops: bladeops.com/?aff=23
Artisan Cutlery: shareasale.com/r.cfm?b=219326...
GP Knives: shareasale.com/r.cfm?b=631534...
Blade HQ: shareasale.com/r.cfm?b=375565...
Vosteed: shareasale.com/r.cfm?b=197313...
We/Civivi: shareasale.com/r.cfm?b=198944...
My Email: kevindoodyvideos@gmail.com
MY MOST USED AND RECOMMENDED GEAR:
Kizer Drop Bear: amzn.to/3q7nPLY
Spyderco Delica Wharncliff: shrsl.com/43507
Streamlight Wedge: amzn.to/3WFxR3g
Ohio River Jacks: www.traditionalpocketknives.c...
Leatherman Rebar: amzn.to/3bueYgd
Olight i3T Eos: amzn.to/3Jdm4DX
Fisher Space Pen: amzn.to/3ynuXWu
Lancelot Leather Strap Wallet: edcroundtable.com/product/str...
MY MOST RECOMMENDED BUDGET KNIVES:
CJRB Pyrite: amzn.to/3ODzD2W
CJRB Ekko: amzn.to/3OL1QF8
Rough Ryder Work Knife: amzn.to/3A5DY7x
Ontario RAT 2: shrsl.com/3vw0k
Kubey Momentum: amzn.to/3WDvMVu
Cold Steel Tuff Lite: amzn.to/3ouqNKj

Пікірлер: 68

@GasStationKnives4Ever 6 ай бұрын

When I need to grip a barrel with pliers I always use a thick piece of rubber band for additional grip and protection.

@MartinMartin-xm8xs 6 ай бұрын

Very nice! I have the lightweight and have been on the fence about getting those scales. You just helped me make up my mind. Thanks buddy! Great video

@Sal_car88 6 ай бұрын

I like early morning doodys before work. AWT scales are so awesome!

@timtitus2532 6 ай бұрын

My Para 2 (not the lightweight) was a little stiff when I got it. Had to adjust the pivot just a hair, now it runs beautifully. Good video, Doody. Thanks

@meursault1654 6 ай бұрын

AWT transformed my PM3 lw too. Super snappy and solid. For some reason did more for this model than my PM2.

@WeaselJuice 6 ай бұрын

I’d love that blade too! Could definitely make use of it.

@ryanjordan7268 6 ай бұрын

Great review!!! Thank you!!!

@saltytomato3018 6 ай бұрын

my spy27 para 3 came with slight lockstick like that too where it clicked when i pushed it in. What fixed it was cleaning it very well with alcohol so there was no lubricant and allowed it to wear in. After about an hour of fidgeting it was perfect. I tried oil and Graphite(separately) first and both only made it worse.

@Hungrybird474 6 ай бұрын

👍 you got a nice snappy one . Ordered some gun metal gray native 5 AWT s last night for the maxamet

@JROTCBALL 6 ай бұрын

I always wondered if the PM3 could have its scaled replaced.. I installed some blades we love scales on a standard pm3 n kinda want a LW in spy27

@cavemandanwilder5597 6 ай бұрын

FWIW Eric Glesser has said that blades from the lightweight SHOULD work with the G10 scales and vise versa. No guarantee but personally I would feel comfortable trying it. Also, there’s only one washer because the scales are made of nylon, so they made one of the scales really smooth in order to act like a nylon washer. For a bit more detail check out the Para 3 LW tear down video on SpiderCo’s KZfaq channel.

@doodysdaggers 6 ай бұрын

Gotcha okay that makes sense

@jimluckie8800 6 ай бұрын

AWT is the bomb 💣 good fitting scales.

@Jstarr918 6 ай бұрын

Awt is the way, I have a set for my mini adamas on the way

@leafywiggy4427 6 ай бұрын

This company seems to make pretty nice scales. Probably gonna get some for my native5 lw and later on my para3 lw

@zexnynex777 5 ай бұрын

If they can do all these LWs, and a G10 Manix, they can do a Manix LW, ive been waiting for a while now.

@andyhayward1261 2 ай бұрын

I love my P3 LW, even with the off center blade and FRN scales it’s a great little blade but the AWT scales really kick it up a notch or two ❤ For anyone looking at getting them I would recommend getting a lynch clip to replace the wire one because the wire clip moves so much that it’ll wear a hole in the cerakote that you can see even while the clip is attached, I can’t understate how ugly it looked lol - so bad that I just ended up buying a new set and put the lynch clip on it from the get go (which I do with all coated aluminium/wire clip knives now) Apart from that they’re fantastic! Also I absolutely love that CTS BD1-N steel so don’t feel like you NEED a super steel. I always intended to get another lightweight in a “better” steel but the BD1-N has grown on me so much that I no longer have any desire to do so

@doodysdaggers 2 ай бұрын

Yeah man, even Spydercos more “budget” steels are fucking awesome

@ryandye6242 6 ай бұрын

Good morning Doods!!! Have been thinking about doing this just not sure if I want to yet. Love all my Pm3. I would have probably said the F word at least 14 times doing this 😂

@just_nate_8694 6 ай бұрын

Nice my Dood! Come on lightweight manix scales...come on lightweight manix scales...come on lightweight...... Come on OG Goat, AWT. When they come they'll be sold out days before I can even make it to the website I'm sure. The para 3 looks badass tho!

@doodysdaggers 6 ай бұрын

Haha yeah hurry up AWT!!

@kathleensmith370 6 ай бұрын

good idea

@paullmight42 6 ай бұрын

I know you said it wasn't a big deal and I'm glad you were able to do this, but I really wish you would have told me there was an issue with it...I would have taken it back(and probably did what you are doing now lol)

@doodysdaggers 6 ай бұрын

Nah it’s fine I didn’t mention it because it was still a decent deal for me, I got these great scales and clip and hardware. All good dood 🤘

@tommyboy8341 6 ай бұрын

I want one so bad i just can't afford it the Pm 2 is one of my dream blades for sure

@DrDrewdude 6 ай бұрын

Very nice!

@imiszasz2442 6 ай бұрын

awt scales remove the liner, and add a 2nd washer to make the build 'symmetric'. this is why they can help with off-centered blades

@S7ORM3X 6 ай бұрын

Damm i would contact AWT for sure they probably will change your scales, also they sell a full set of para 3 lightweight hardware with the barrel and pivot

@EdenPrairie_OldsGuy 26 күн бұрын

Can you tell me where you got that amazing parts holding tray?!

@doodysdaggers 26 күн бұрын

Tinkerforce.com

@ting280 5 ай бұрын

Is that the cast iron?

@whatfreedom7 7 күн бұрын

Anyone tried adding a second washer to the lightweight? Mine is way off center to the point it’s almost rubbing the blade on the other side. Just wondering if adding a second would center it up better if it would fit.

@doodysdaggers 7 күн бұрын

It’s worth a shot !

@grndayjegi3 6 ай бұрын

If nobody claims that blade I’ll buy it off of you. I snapped the tip off of my s30v para 3 and ground it down to a stubby tanto but would love to have a full blade again lol.

@doodysdaggers 6 ай бұрын

Somebody claimed it but never followed up. Hit me up on IG

@jd4edc 6 ай бұрын

AWT scales ship with the extra washer 👍

@doodysdaggers 6 ай бұрын

Okay cool! Thanks bud

@paullmight42 6 ай бұрын

and yes, AWT includes the additional washer

@MikeJ602 6 ай бұрын

Can’t wait to get mine. Just waiting for the stupid salt to drop.

@doodysdaggers 6 ай бұрын

Hurry up Spyderco!!

@sodathief 6 ай бұрын

man i had some closed blade play / detent rock it was weird. AWT said, they are not perfect and I had to return

@doodysdaggers 6 ай бұрын

Weird! Never heard of that happening. Get a replacement?

@sodathief 6 ай бұрын

@@doodysdaggers I kinda just gave up. I might try again some other time

@jimcchesn 2 ай бұрын

Has anyone claimed that extra blade? I’d love to do a custom build with it if it’s still up for grabs.

@doodysdaggers 2 ай бұрын

Message me on ig

@annasoH323 6 ай бұрын

I keep forgetting to check for Native 5 LW scales. Would definitely change the game there.

@doodysdaggers 6 ай бұрын

They’ve got them at AWT! Might be out of stock but they make more fairly often

@Sal_car88 6 ай бұрын

Doody, I'll take the Ti hardware if it's not claimed yet.

@fredp1983 6 ай бұрын

This might be the way to go rather than Para 3 G10...... Theres only 1 or 2 makers of lightweight scales that I know... and theyre not cheap... in the end its almost the same price as a g10 version... What you reckon is the difference???

@doodysdaggers 6 ай бұрын

I think this route ends up being a little more expensive because these scales are about $100. But totally worth it, they feel so good

@fredp1983 6 ай бұрын

even though the lightweight para is cheaper by arounf that much too?? and it still works out $100 more? damn@@doodysdaggers

@Warsmith_Honsou 6 ай бұрын

What color of these scales? Look's like cerakote.

@doodysdaggers 6 ай бұрын

They’re like a dark grey or black

@R.H.bladeNshade 6 ай бұрын

I would love the hardware you didn’t need if at all possible haha. Been looking for some good hardware that doesn’t cost too much.

@doodysdaggers 6 ай бұрын

Someone claimed it already, sorry!

@marcramirez1986 6 ай бұрын

Hey what's up brother how are you doing today? And if you have not yet given the blade to anyone! I will take the blade if you don't mind.. I have just the right spot for it since the blade of my para3 is pretty beat up.. that blade of yours would be perfect... thank you and have a great day.. also let us know how good spy27 is because I thinking about buying one

@doodysdaggers 6 ай бұрын

It’s been claimed, sorry!

@samturner6455 6 ай бұрын

Plastic and metal washer don't mix.

@samturner6455 6 ай бұрын

Yes AWT sends a washer.

@garykennedy66 6 ай бұрын

Would love the hardware if nobody else is interested

@Jayscott75 6 ай бұрын

I don’t have a Para 3 but am rocking AWT on my PM2 and they are definitely great scales. I will say though, in your shoes I am pretty sure I’d be sticking with that dark Ti hardware as I think that looked pretty sick even with a satin blade. But it’s your jam and very cool of you to be passing the blade and hw on!🫵🏼👊🏼

@doodysdaggers 6 ай бұрын

You might be right I’ll probably be switching back to those ti ones

@the_knights_edge 6 ай бұрын

I'll take the blade if no one wants it lol

@doodysdaggers 6 ай бұрын

Someone already messaged me. If he falls through then it’s yours!

@the_knights_edge 6 ай бұрын

Hell yea dood thanks

@isaiahgray3057 2 ай бұрын

$100 scales on a $120 knife. Lol nope.

@kill3rkitt3ns Ай бұрын

Bought some AWT scales for my Manix after watching your video, they’re fantastic. I did break the tip off my Para 3, not sure if you still have the old blade but I would love to take it off your hands if you do

@doodysdaggers Ай бұрын

I don’t, sorry mang Glad you’re digging the scales 🤘