Installing Belltech Front and Rear Lowering Kit + Sway Bar Set on My C3500 Truck

Рет қаралды 12,400

Жыл бұрын

Check out what Belltech has for your suspension needs! The Belltech Front and Rear Complete Kit with Street Performance Shocks (722SP) is a suspension part designed for lowering the ride height of trucks. It includes both front and rear components, along with street performance shocks, to enhance handling and aesthetics. This kit is suitable for various truck models and provides a complete solution for achieving a lowered stance with improved performance.
www.belltech.com/
PARTS LIST:
Lowering Kit - www.belltech.com/products/bel...
The Belltech Front and Rear Sway Bar Set with Hardware (9907) is an anti-sway bar kit designed to improve stability and reduce body roll in vehicles. It includes front and rear sway bars along with the necessary hardware for installation.
Anti-Swaybar Set - www.belltech.com/products/bel...
Thank you to the build sponsors:
Mirror Image Auto Body - mirrorimageautobody.net/
LMC Truck - www.lmctruck.com/
Belltech Suspension - www.belltech.com/
Dakota Digital Gauges - www.dakotadigital.com/
AZA Auto Wheel - azaautowheel.com/
Florida Paint Supply
AutoAura Paint - www.autoauracoatings.com/
Indasa Abrasives - www.indasa-abrasives.com/
Clear Coat Solutions - csishine.com/
The Dually Shop - Instagram - @theduallyshop
Thank you to the build partners:
Lowboy Motorsports - lowboymotorsports.com/
Contact the builder:
FB - Bazer the Blazer
IG - @bazertheblazer
TikTok - @bazertheblazer
Magazine Subscriptions!
Street Trucks:
IG - @streettrucks
FB - streettrucks
Magazine - engagedmediamags.com/automotive
C10 Builders Guide:
IG - @c10buildersguide
Magazine - engagedmediamags.com/automotive
OBS Builders Guide:
IG - @obsbuildersguide
FB - groups/obsbuildersguide
F100 Builders Guide:
IG - @f100buildersguideofficial
Magazine - engagedmediamags.com/automotive
#chevrolet #duallypacetruck #streettrucks

Пікірлер: 44

@timgibson2070 24 күн бұрын

16:32 Yes get them if they're damaged, etc but not everyone has $500 extra to spend just because you don't want to replace the bushing!

@Diddley-js6lf Жыл бұрын

Follow your Instincts they will never let you down.

@rubenr7650 Жыл бұрын

The truck is looking clean with the drop kit. I hope you bring this truck to Texas one day

@motortopiaondemand Жыл бұрын

Thanks, Ruben! I'd love to ride over there

@rubenr7650 Жыл бұрын

@Motortopia I hope you can bring it to Lone star throwdown in Conroe Texas in February one day

@johnbehneman1546 Жыл бұрын

THANK YOU, BELL TECH,!!!!!

@therootedjoy Жыл бұрын

I love it Josh!! It’s coming together real sweet like. 🤙🏻

@johnbehneman1546 Жыл бұрын

I LOVE IT!!! THANK YOU SO MUCH.

@tonybrown6775 Жыл бұрын

Great tow pig for the Playboy truck badass obs

@motortopiaondemand Жыл бұрын

That would be a site to see for sure!!

@fishpony1211 Жыл бұрын

Awesome build dude!

@motortopiaondemand Жыл бұрын

Thank you!

@lolife999 Жыл бұрын

Just my opinion, you should have lowered that BEFORE paint. Plus working on the rear is WAY easier with the bed off. Cool truck.

@motortopiaondemand Жыл бұрын

Yes, it is way easier but that wasn't possible with this truck. Sometimes you guys gotta roll with it.

@lsx_evan Жыл бұрын

absolutely loving this truck build!!

@motortopiaondemand Жыл бұрын

Thank you!

@lsx_evan Жыл бұрын

@@motortopiaondemand no problem! im trying to find a dually just like this for my dad but its hard to find one thats not beaten to all hell lol. keep these videos coming!

@ant-hu1gs 2 ай бұрын

Josh, I notice you installed a bearing carrier for the drive shaft. I have a 91 1500 do also need to purchase the spacer ? Great video by the way !

@russellg7382 Жыл бұрын

Rocked my beltec dropped obs for years. Rides great looked killer. Motor failed years ago and sparked the build. I was planning on lowering my 96 k3500 but decided to go kinda lifted. I will have both a bagged dually and a lifted dually when it’s all done

@motortopiaondemand Жыл бұрын

Best of both worlds!!

@russellg7382 Жыл бұрын

@@motortopiaondemand yeah I’m kind of excited for it.

@justinolsen3714 Жыл бұрын

Definitely lowered $

@aventurascomvalentinaemlas3574 Ай бұрын

Amazing truck. I have 1995 extend cabin that i want to the drop. However i dont want to go to c notch.

@davidjensen3720 4 ай бұрын

What are you spraying on the underside? Looks clean

@ricergarage3092 5 ай бұрын

So, you stated for the c2500/c3500 as for the drop kit. Im assuming the install process should be the same for either or.

@zeljko05 6 ай бұрын

What long tubes do you have installed? I cant seem to find anybody that sells long tubes for a L29 454

@naturalmystic7 Жыл бұрын

Looking good 🔥 what did you torque the ubolts to? I have a 83 short bed I recently lowered.

@motortopiaondemand Жыл бұрын

Thanks! Belltech calls for 95-110 ft lbs on this kit.

@randylooney1866 19 күн бұрын

What r the shock numbers for the rear I have a 5/7 drop need new rear shocks

@gerardohernandez-oi6gy Күн бұрын

Would this fit a single cab dually 1989?

@CarlosDiaz-ju5lq 2 ай бұрын

Hi it looks real good, I love it.. but one question how much is that kit?

@CarlosDiaz-ju5lq 2 ай бұрын

How much for that kit, and the best place to buy it, pleeeeeease

@APMIA305 4 ай бұрын

I have the same truck but a '98, I used your method as to where to put the templateon the drivers side. What about the drivers side

@APMIA305 4 ай бұрын

*passenger side

@calvingrant9800 6 ай бұрын

What did them wheels come off of or are they after market

@motortopiaondemand 6 ай бұрын

They are Aftermarket wheels

@barryhebert5839 Жыл бұрын

My 97 has a 6/8 drop on it an it’s way to low for the roads in my area I’d like to pick it up to a 3/5 drop or if they have it available a 4/6 drop cause I think a 5/7 is right there with a 6/8 drop an just to low the y pipe hits the road an really bad pot holes the front cross member scraps as well

@motortopiaondemand Жыл бұрын

Just got some from the Power Tour and I put 1,900 miles on the dually with this drop. You're right, it is very low and if you're not careful you can bottom out or rub but the truck did great!

@barryhebert5839 Жыл бұрын

@@motortopiaondemand yeah mine rides awesome just road conditions are just not suitable for the truck that low unless you put air bags so you can lay frame at car shows an air it up higher than a 5/7 drop to drive only way to do it but then you always got to be worried about when a compressor is going go out or when an airbag or air line going bust so idk I think a 3/5 drop is just best to go with

@upstylefabrication569 Жыл бұрын

@barryhebert5893 what kit do you have in your truck ?

@barryhebert5839 Жыл бұрын

@@upstylefabrication569 idk I bought it lowered I was just told it was a 6/8 drop I tried looking for brand stamp or part number of something on the spindles or springs but couldn’t find anything I assumed bell tech cause have bell tech shocks on the rear but no telling an guy I bought my truck from didn’t lower it either so he doesn’t know either

@Diddley-js6lf Жыл бұрын

I have a 21 gmc 2500 Crew Cab w/6.6 Duramax I really want to lower my truck but everyone tells me it’s way too expensive like $20,000 Dollars

@Diddley-js6lf Жыл бұрын

It’s pretty touch working on the Ground. For sure if you cut the wrong way then as far as repairing goes that will be fine but for Showing piece it will look like a Amateur Built the Truck. Lolll

@motortopiaondemand 11 ай бұрын

This was probably the toughest part of the build because of rolling around on the ground and working with these heavy duty parts. 100% worth the effort though!