Exactly! 🤌😎

Neeper.... YUP that's the name... I remember as well!

They were ugly then and still are. Those steel wheels looked better. And what’s with the SS badges on the doors? Super sport dually eh? I remember when SS actually meant something.

Well it ain't no SS 396 Chevelle I will give you that.. They were already on the truck 😁.

@@ChallengeTheBuild Badge less is good! Or how about some cool looking 3500 badges.I was always a fan of the black ones with the red or blue bowtie 😄 I would have flicked those off in the previous owner’s driveway 🤣

😂😂 So there is a back story on the truck and I can understand why they are on there..🤷‍♂️

Yup! Life before the internet 😂😂😂and the dial up 56k modem 🤨😂. Appreciate the watch/comment/likes. I appreciate it💪

Thanks GeeFunk 💪 It is a pretty bad ass rig, just wish it was mine😂 oh well can't have em all...Thanks for watching... I appreciate the support

Thank you. I appreciate the watch and comment. 👍

Awesome! Thanks for watching and commenting... I appreciate it.

These are some of my favorite type of comments 😁👍, just respect for the build! Thanks for checking it out! 👍😎

Thank you, I am dropping a build recap video tonight @ 8pm est. I realized that unless you watch the build series you may not have seen the truck completed.. Watch tonight's video if you get a chance.

🥵 I wouldn't mind having one! 😎

Glad you enjoyed it, thanks for checking it out! 🙌🤙

In depth? Putting wheels on a Chevy truck? If you say so.

Thanks... It is pretty sweet...

Me too!😎👍

Thanks 😎👍

Sounds like a sweet ride.. Boyd custom wheels were it back in the day!😎💯

Agreed! 😎

Thanks, I appreciate it! 😎🤙

Agreed! 😎👍

Thanks Bill 🤝 I appreciate the watch and comment 👍...

😂😂Right on! I appreciate the support 💪.. Thank you, I have been struggling with what to do with my youtube channel lately and I find it funny and encouraging that within the past couple days this video has been getting some attention which has been refreshing. So thanks for watching/liking/commenting it is greatly appreciated . #ChallengeTheBuild

Appreciate it, Thank you..👍😎

Thanks for watching 👍

Thank you..😎🤙

I would agree! Old Square body would look sweet!

😎💯👍 These are some of my favorite body style trucks!

That's a solid truck also👍, you don't see many SRW's around anymore (atleast I dont see many). Thanks for checking out the video...🤙💯

Lowered vehicles are cool but sometimes a pain in the butt to work on, 😂. The things we do!

Once you drive a truck ...later buy a car you always go back to a truck dodge truck one has 528,000...dodge truck two 185,000.. antique and yea do use them gravel in bed name it and do have cars old 928...stick..

I will probably regret selling them at some point but they are gone.. 😎🤙

Thanks for the info, I will have to look. Appreciate the support/ feedback and comment. 👍

😎👍

Nothing wrong with that!😎 Makes for a good look..👍

I could have given it .50" more in by facing the inner wheels and counter bore the back of the Adapters for 5/7 drop.

Dually wheels on it?? Or Semi wheels?

They are milled Alcoa semi wheels .

Rides on air...😎 Still a little rough but better than expected 👍👍

Neepers I think is what they are... 20 yrs ago that was top of the line for the obs dually...I remember 😎

The center caps that were put on really finish of the look, the bowtie emblem really sets the wheel off nice! 😎👍 Appreciate the watch..

@@ChallengeTheBuild beautiful work

I loved my JC Whitney catalogs also, kids today have no idea the joy of magazines/catalogs 😂😂

@@ChallengeTheBuild I would still read old catalogs and read the speciality sections for antique vehicles and the hot new items always were interesting which if you remember right were the free gifts you would receive with an order but were cheap af Taiwan shit. But free so wtf. Good chatting with you. Only a few great minds got into JC Whitney. LoL..

Cheers to the good old days!👍😎

I get it for sure..😎👍👍 Thanks for watching.

Honestly I can't remember the info on the tires... I didn't buy the wheels or tires so... I feel like they weren't E load range tires but I could be wrong...

So the truck had 3.73 gears and the tires are not that much larger however the truck could benefit from 4.10s to help with acceleration and still maintain a good highway cruise. Keep in mind that the actual stock oem wheel and tire size would have actual been bigger then the wheels I took off and put back on... The OEM wheel and tire would have probably been a 245/75/r16 or something equivalent 🤷‍♂️🤔

Its definitely not for everyone... 🤷‍♂️

I will be making a video of the airbag installation after I get all the fabrication wrapped up, hopefully within the next couple weeks... Keep watch...👍👍

😎👍💯... I also just dropped a recap build video today if you are interested, kzfaq.info/get/bejne/hNqgoLpqpq6-YGw.html . Appreciate the watch and comment..

Agreed! Unfortunately I am still waiting for the new ones to be made. Kind of frustrating....

😳...😂😂😂...🤷‍♂️ Nah....This ain't the one..😎🤙

@@ChallengeTheBuild lol but its a nice truck. I'll check out some of your videos now.

Appreciate it... Thanks

I can understand the hesitancy. The lug nuts on the 10lug adapter for the Alcoas were stamped 450-500 ft lbs but because this isn't an 18 wheeler I didn't torque to that spec. I think I torqued everything to 150 ft-lbs +/- I can't remember, I did use a little blue thread locker on the lug nuts that held the actual adapter on and both adapter and alcoas are hub piloted so everything was solid. As far as getting everything torqued I snugged everything with a few ugga duggas and then torqued everything once it was on the ground. It really isn't that big of a deal, pretty straight foward and I'd imagine each company that sells adapters and wheels recommend different things.🤷‍♂️. After installing and driving a few hundred miles I re-torqued and that was that. The re-torque didn't expose any loose lug nuts either, everything was dead on where it was when I finished the first time... I think because of being a trucker you're thinking BIG TRUCK thinking (not that its wrong) just keep in mind there's a big difference between Semi Truck and 3500hd and whats required with each truck... Regardless we still want to be safe! Hope this helps🤷‍♂️👍 .

@ChallengeTheBuild yeah that helps. I appreciate you. I think what I'd do is just a retorque after 150 miles. And then just check up and then after 2500 miles retorque again as a Precaution.

I have often wondered the same thing. I have never seen any nor do I think they make any.

Wheels/tires/adapters came from Michael's Truck Works, links are in the video description..👍

Definitely a sweet rig!

Possible? The Beeper wheels I took off are 8x6.5...

Lug covers needed a little modification.. Unfortunately

Im not 100% sure honestly? You would just have to make sure to buy the correct rated tire. I believe these tires are E rated tires, now I have to go look...👍

I do not believe they were face milled, I actually did not order them so unfortunately I don't know many of the spicy details. 🤷‍♂️ sorry..

@@ChallengeTheBuild no worries, just in the beginning stages of looking into tucking a set under my '91. Thanks for the comment, subbed for the remainder of the build ✌️

Appreciate it, Michael's Truck Works seems to have it figured out, I was watching Finnegan's garage they other day and he had Michael's Truck Works mill a set for the #Roadkill ramp truck. I can say if you want to lay fram with the truck you will have to do alot of work within the fender wells front/rear. I will have a video of airbag installation within a couple weeks hopefully, getting parts powder coated now. Keep up with the build on Instagram if you would like..👍

Hmmm. I mean the adapters and wheels will bolt uo but the backspacing would be something that you would have to measure and double check.. Personally I don't think the front would be an issue I think the rear would be..Call Mike's Truck works and see if he knows?

265/35 r22 I think... Watch the video, I am pretty sure I mentioned it.

😂😂😂 "Low White" said quick enough like you said flows nicely.. I appreciate the comment and the watch...👍👍😎💯

I often wonder the same thing.. 🤔🤷‍♂️😎💯 Thanks for the watch and comment 👍

I run 20mm spacers on a audi wagon. Never had any trouble. They've been on for 5 years.

@@fourringking a car and a truck is totally different. They are used very differently and the weights are much much heavier.

No doubt... The downside of big wheels is rubber band tires. 🤷‍♂️ The things we do for looking good..😎

They are heavy! I forgot to weigh them but I'd imagine that they are about 30-40lbs +/- each and yes you are correct on all points. My main concern is specifically on the front end, not so much the rear. Thanks for watching and commenting. 👍

Not really no.. I removed the paint on the hub lip (carefully) and then sanded down the hub... Once I put the adapter on the wheel I wasn't about to try and take it off, it was tight but they are hub Centric soo a tight fit was good. Id rather them be tight then loose...🤷‍♂️. Wish I had better information for you...

@@ChallengeTheBuild thanks for responding. I’m going to have a machine shop mill them to the 116.7mm that GM specs.

No worries 👍, good luck with the install. #ChallengeTheBuild

Negative, the front are different. Not interchangeable.

I was beat by the end of the day...I drink a lot of water but good call on staying hydrated 👍👍

I am not sure on that... The best bet is to Google machine shops locally or call tire places to see if they can recommend someone, that's where I would start.

I want to say a 3/5 possibly a 5/7 static drop prior to me building the airbag suspension.

They are sold.. 👍

They have already been sold..👍

I had an issue with them unfortunately, if you watch till the end I did put them on however they weren't right... I eventually got the problem solved...

@@ChallengeTheBuild your truck is a beast.

Thanks. And the old ones aren't for sale at this point in time... Probably gonna use them on a different project...

Yes... They are factory rear fenders. I did clearance them just a tad to help clear the wheels.... It's a tight fit...🤏👍😎

Might as well...🤷‍♂️

Got it 👍

The wheels are milled Alcoa blanks.

Holding up well, unfortunately the truck doesn't get driven all that much...🤷‍♂️😔

@@ChallengeTheBuild that’s both good to hear and unfortunate at the same time.

I'm sure that they do🤷‍♂️? But just like anything else I don't know and would have to spend some time do my own research to see what was available. 👍

Pretty close..😂🤷‍♂️

Thank you, I appreciate that! 👍😎

They both have a special place to me... The Apache is a completely different style of project and definitely has my heart and soul into it so for that I like it better also...😎

Overall cost...Never seen anybody do a conversion... That is some serious work right there...

I did not purchase them, but I believe they were around 5 thousand +/- for the set...

@@ChallengeTheBuild thank you my bro keep up the good work💯🤙🏽💯

I'm not sure honestly, I didn't buy the kit so I never actually looked. I do not believe they were E rated tires...🤷‍♂️

I myself would like a little taller sidewall too...

🤣😂🤣🤷‍♂️👍💯

Right on! 😂🤣 Appreciate you checking it out! 👍👍

🤷‍♂️ Possible but I doubt it...

Tamato / Tamoto 🤷‍♂️ Regardless of the term, it was trashed😁

Don't forget to thank the road departments for terrible roads😏. One pot hole and your making money! All in the name of looks!😎 Heck yeah!🤙

@@ChallengeTheBuild Just another reason not to put big fat wheels with low profile tires on.

Valid point for sure..👍

🤔🤷‍♂️

It could use a little more side wall...👍

I'm gonna keep them a while.. Might use them on an upcoming project...👍