Great video. Thanks!

By far the most helpful livescope install video. Really broke it down for anyone to understand. Really appreciate you showing the switch install as well.

You guys covered it! Having just installed it this year, I can tell you that this video is really helpful. Keep up the good work.

Austin, nice job communicating clearly and accurately. I watched the video to see if there were any additional ideas related to DYI mount ideas. Although there wasn't what I was looking for I was impressed by how well you communicated the technical aspects of the Live Scope. BTW typically an electrician uses an additional wire when pulling wires not a rope, it's much smaller and easier because of the wire insulation slides easier. Anyway you brought hope back to me regarding the younger generation and the incompetence I see everywhere. Thank you for the video.

Nice work man!

Great video, thank you.

Everything You need to know and more, Thank You 👍👍 Subscribed

Great video but I went with a 18v Ryo bi X2 for power to 12xsv and gls10 works perfect and very little wire to deal with .great vid

I actually use a tape measure to run stuff up and down the bottom of the hull. I zip tie the wires to it and run it up.

It's so crazy to me that Nitro put the gas tanks back there with all the batteries and electrical wires😬🔥

Thanks for sharing all the good info! If you mount the box further back from the graph, I would recommend just buying a longer ethernet cable instead of buying an adapter cable. You can buy a 6 meter small connector ethernet for about $50 now.

Crazy that Garmin doesn’t have a remote turn on. That just activates when it sees 12v so you can just install toggle switch.

Enjoyed the video. I do have a question about the black box. Can I install it in the back of the boat and run the wire to the front of the boat to the transducer? Thanks for your help.

hey nice video very helpful. could you tell me where you got the aluminum for the mount

I wanted to see how you ran the big wires running from the live scope box to the trolling motor and the graf did you drill big holes in the boat or what cause that cable is a big damn thing ?

my voltage starts off at 12v with my hds live 12, hds live 9, and the garmin 1022 with livescope. within the first 15min the voltage will drop to 11.9. my batteries are usually fully charged. we are using 10 gauge wire. what do you think it could be? not sure why my voltage is at 11.9 at the beginning of the day. I have the same battery as yours and i just bought it 3 weeks ago.

GREAT video fellas! Do you guys see much interference on the Garmin or the Lowrance electronics since both transducers are so close together on that trolling motor?

on your boat , where did you get the small fuse panel ? i may install that panel like yours in the similar location to Nathans. Then power 2 head units (106 and 93) and livescope box too. did you run #6 from battery to switch then #6 again from switch to fuse panel ?

I need some education on the F8ah 250v cable. What are the blue and brown wires for? I have read the install manual and I cannot find a section about that cable. Did you put the and negative on an accessory wire or did you run separate wires to the battery for that? Thanks

Great job guys, getting ready to do this install 😁. One question, does the sonar unit have to have a separate power source or does it get power from the black box.

I’d put the transducer on the side not on the trolley motor so I can point it wherever I want manually cuase I sometimes use my trolley motor for a anchor

Hello sir, I ran across this video on garmin and livescope installation....my question is about the 10,8&6 AWG wire....do you need all three wiring or one of the three, thanks for the instructive video.

The power switch in the back. is it going to one battery or do you have it going positive on one battery and negative on the other ?

Like the video great job.Where did you get the rubber loop at the trolling motor head and where did you connect it too.Thanks Rick

Power question - does the gls 10 box and sonar/chartplotter get dedicated power? So 1 switch with 10awg run to the gls 10 box and another switch with 10awg run to the sonar/chartplotter?

Do you have separate battery just for the livescope or is it wired into your trolling motor batteries?

My boat came with two power switches, one for trolling motor batteries one for all other electronics. Do you think I still need a power switch just for the black box? Thanks.

I live at The Lake of the Ozarks. Looking to upgrade all my electronics. I want to make sure I have the right power. Did you get your battery local?

Thanks for the video. Are the livescope power wire and the front graph power wire connected together by the black box? Thanks again

So is there a separate set of power wires going to both the head unit and the black box? Or does it just go to the black box?

What do you use your lowrance for if u got the garmin?

Hello, so if I get a deep cycle 80 amp hours battery, I should get at least 15 hours of fishing at 5 amp depletion per hour? I found a size 27 deeo cycle with either 80 or 100 ah

How do u like that 9 inch screen? Is it too small or not? I m thinking to buy it for ice fishing

Does livescope Blackbox have to be programed through active captain ?

i noticed that my 1022 and livescope came with a 6 amp glass fuse, they don't make 6amp fuse for the square fuses so my only option is to use a 5amp fuse or a 7amp fuse. I wired everything into a fusebox but the fusebox don't take a glass fuse. which fuse do you use? what size?

I have 2 Garmin 106sv that I want to be able to connect to the Livescope. How would I wire them up to the black box? Is there only 1 network hum in the black box?

What amps were the blue seas red switches did you use? Thsnks

I know this is an older video, but I ordered livescope 34 plus from bass pro and it says the perspective mode mount is included. Is this the adjustable one? i get i tomorrow

Have you guys had any trouble with your unit popping out of the case

Can you get live scope with the echo map uhd 95sv?

How far apart are the mount holes on the module?

What size screws do you use to mount the black box?

Where can I find that cable keeper that goes at the top of the ultrex

Is the GLS 10 splash proff?

Wires, man I hate messy wires. It’s so hard to keep it uniform when it comes to boat wiring 😂

Do I have to buy the network cable separately?

Can you provide the extension cable name or serial number?

We're 100% certain that the black box pulls power all the time even when your Power switch is turned off??? I was going to wire mine to a 6-way fuse hub which is powered by my main power switch on the dash.

I have that X2 battery and with all of the electronics I have it doesn't really provide the necessary power to operate long periods of time. I ran all of my electronics to a separate lithium 126 amp/h battery.

When you have your batteries charging how come on the battery disconnect still shows power when you have the battery disconnect on the off position. Is this normal? I just installed mine and I want to make sure I’m okay. When you unplug the charger and put the volt meter back on the wires it shows 0volts when the battery disconnect is on the off mode. Will that short anything out or blow the inline fuse?

How can I ground the black box?? Running a 32 AMPED outdoor battery dedicated to LiveScope

What is that switch called

So only two wires to the fish finder

You wouldn’t happen to have the part number for the 10 foot extension network cable ??????

Did I miss you installing cables to head unit? That's why I watched

Couldnt follow the part of doing the network cable or doing power for your graph or the graph connections. You skipped over all of it

now its a LOWrance

I created a fully automatic remote control for live view transducers to put in and out of landscape. The Shade Tree Engineer youtube channel