How to Install Garmin LiveScope

How to Install Garmin LiveScope - New LVS34!

Рет қаралды 151,395

Everyday Fishing

2 жыл бұрын

Today I'm installing my new Garmin LiveScope Plus - the LVS34 transducer and the GLS10 Black Box.

Пікірлер: 159

@hairtrigger903 Жыл бұрын

I'd recommend you put the inline fuse within 12 inches of battery. With the in line fuse in the bow you have a long length of wire with no short circuit protection. I hope that makes sense.. I'd put a but splice where you put the fuse and put fuse between battery and switch.

@98red300 4 ай бұрын

By far the best video showing how to setup a livescope system. I had a friend that paid $500 for his install and it looked like a 3 year old installed it. Your install was super clean. Great Video!!!

@Everydayfishing 4 ай бұрын

Thank you! Glad you liked it

@mattmeininger699 Жыл бұрын

One of the best instructional videos I've seen. Excellent camera work, explanation and to the point. Thanks for sharing 👍

@Everydayfishing Жыл бұрын

I appreciate the kind words! Glad you found it helpful

@charlesjones257 2 жыл бұрын

that is the cleanest 1 year old bilge i have ever seen. congrats on keeping it clean :)

@Everydayfishing 2 жыл бұрын

Haha - thank you... water doesn't get in it much so its been easy to keep clean

@dannylang7971 Жыл бұрын

Nice job man, good work. I like it when a man is particular about his work.

@danieljaimes5740 Жыл бұрын

Best video out there with perfect instructions! I’ll be installing mine this weekend and will definitely be using this video as reference!! Thank you!!

@kljohns4 11 ай бұрын

This is an excellent tutorial for anyone wondering if they should follow it or not. I just installed my unit following this step by step, and he's got it nailed down to the materials needed and time for install. Thank you for posting.

@Everydayfishing 11 ай бұрын

I’m glad you found it helpful!

@pvd354 Жыл бұрын

There's professional installer who don't do as good of a job as you. Great work!!!

@Everydayfishing Жыл бұрын

Thank you! Hope you found it useful

@user79592 Жыл бұрын

I'm happy to not hear music in the beginning of this video. Not overly produced video. Less is more. The cutoff switch is something I haven't considered. 🤔 I'm glad I watched.

@Everydayfishing Жыл бұрын

Thank you! Honestly you probably don’t need the cut off switch… in my experience, when my graph is off then the black box is off. But it doesn’t hurt to have it

@user79592 Жыл бұрын

@@Everydayfishing I already ordered it anyway 😀

@lmarvin65 2 жыл бұрын

Great video, you're inspiring me to put Live Scope on my Z18. Already have the Garmin Force and two UHD finders. Looking forward to seeing any updates on it's use once you get it wet.

@Everydayfishing 2 жыл бұрын

I’ve been out with it a few times now… it’s incredible. First time using it I was able to identify fish, cast to them, and catch one. It’s nuts!

@aaronbrown3593 Жыл бұрын

Thank you for making this video. Appreciate the help it will provide me with my install.

@kba8159 Жыл бұрын

doing some studying and your videos are the perfect study guide, thank you so much, I love your stuff.

@Everydayfishing Жыл бұрын

Thank you - I’m glad they helped!

@johncampbell183 Жыл бұрын

It's nice to see a really good quality install and not a hack job. I'm saving this for a future install. Haven't quite pulled the trigger on the forward facing sonar. Does work well though.

@andrewkoszuth6102 Жыл бұрын

Except for the fuse, it should be at beginning of circuit.

@fishmohr 4 ай бұрын

This instructional video is awesome. Very nicely paced and easy to follow. Definitely going to have my fishing buddies help with install. Look forward to more videos.

@Everydayfishing 4 ай бұрын

Awesome man, glad you enjoyed it!

@toadmarz Жыл бұрын

Good stuff, nice clean install. Thx

@cddawson4027 3 ай бұрын

by far the best install video made, helped me 100%. Thanks for making it!

@Everydayfishing 3 ай бұрын

I'm glad you found it useful!

@neiljacob3446 2 ай бұрын

Great video! Learned a lot.

@gabrielseca 3 ай бұрын

amazing! you just saved me $500+ to get it installed! Great job!

@Everydayfishing 3 ай бұрын

Yes sir - anyone can do the install if you take your time - glad you found the video helpful!

@floridasaltlife 4 күн бұрын

Nicely done video content !!!

@georgegaiennie3747 Жыл бұрын

Well done video. I know nothing about Livescope, and this is a very good explanation.

@Everydayfishing Жыл бұрын

Thank you - glad it was useful!

@markingle8980 2 ай бұрын

Great video showing how to install the hardware! I thought I would mention that fuses should be installed directly to the power source in order to work properly. Hope this helps!

@Everydayfishing 2 ай бұрын

Yes that was one of the things I learned after doing this install. Surprising that the only way to install farther from your battery is to move the factory installed fuse… but yes you are right, the fuse should have been right next to the battery. Thanks!

@markingle8980 2 ай бұрын

@@EverydayfishingI learned the hard way on my first boat several years ago! Its easy to mislead people since the power cable comes with a fuse installed on the positive lead. So I took an online course on electronics and it help a ton on setting up power on my boat...as well as many other installs

@unlock_your_dream_home 11 ай бұрын

Nice install. Only thing I would do different is cut the supplied power cable and splice the 8 AWG wire 8" from the connector as instructed by Garmin.

@duckunder1 Жыл бұрын

Excellent video, thank you, I will be using this for a guide, when I install mine.

@Everydayfishing Жыл бұрын

Awesome, glad it was helpful!

@6to8john Жыл бұрын

What size screws did you use to mount the black box in your rod locker? Thanks

@gr0uch02a Жыл бұрын

Realizing that you haven't had it in use for very long, but are you satisfied with it mounted on the trolling motor or are you considering a dedicated mount of some type for it? I have an Ultrexx and use Spot Lock a lot, so I am a bit torn. About to pull the trigger on the LVS34, but still unsure how I want to mount it. On the TM for sure to start though since that gets me in the water the quickest. Thanks for the video!!

@Everydayfishing Жыл бұрын

Yeah honestly I haven’t had any complaints with it being on the TM. I’d rather not take up space on the deck with another mount. If I do plan to use spot lock, I’ll take a mental note of where the fish/structure was, and make my casts that way.

@lorenames-ox7kt Жыл бұрын

Did you have to run a grond to water ground

@williambigsby4031 10 ай бұрын

Very nice and clean install, perfect instructions waiting on my garmin 1222 bundle definetly will be doing my own install direct to battery.cant beat this video

@Everydayfishing 10 ай бұрын

Awesome man, glad you found it helpful! You're going to love the LVS34

@daveholte7658 Жыл бұрын

Excellent Video! I just watched it As I just finished my install as well I did almost the same install Except I have at console a Blue Seas Fuse Block and wired Black Box and Echmap Ultra to it Actually double fused I don’t understand why Garmin only supples a 6’ network cable Why not for $4K purchase they can’t add a 10-12’ foot cable What bracket did you use for Lowrance and Garmin? Very nice and professional install I have to say you have made the best install video I found Thanks for all your great work

@Everydayfishing Жыл бұрын

Thank you! I'm glad it helped. My graph mount is the H.O.E. Dual Mount from Hennessey Outdoors. Very solid and reasonably priced. I'm happy with it!

@timwhite1748 Жыл бұрын

I have a 2021 Z18 with a helix 7 on the bow. Just curious if you have a boat cover, if the cover fits over things well or if it’s a little too high with that mount? Just trying to figure out what mount I want to get but I like the looks of that one if it’ll fit under my cover, although I don’t use the cover much

@Everydayfishing Жыл бұрын

I don't actually have a cover - my boat stays in the garage so I never ordered one. I imagine this mount would stick up too high though. You can always order a cover and take it somewhere to have it altered... I know a lot of people do that for bigger trolling motors.

@daveholte7658 Жыл бұрын

Well done as commented last week Question I have the Black Box wired 14 gauge to the Blue Seas Fuse Panel as well as the Garmin Echo unit to the Blue Seas Fuse Panel Should I redo the Black Box with 10 gauge and run directly to battery compartment with a Switch as you did? I like the idea of Disconnecting Power of Black Box It looks like you wired to the Starting Battery My Blue Seas Fuse Panel is fed with 10 gauge from switch connected to AGM Battery which is also my starting battery With that being said maybe not a good idea to wire Blk Box thru Blue Seas Panel with no switch at this time. I see on your video there is a Green Light on Black Box Do you have a link for purchasing the switch and duplex 8-10 gauge wire? Thanks again So easy to follow and listen to your great install.

@Everydayfishing Жыл бұрын

I'm glad it was helpful! Honestly it seems like my switch on the black box power was not needed. When I turn my Garmin graph off, the black box goes off. So I think that's all you need if you're concerned about saving battery when not using the LiveScope. As for direct power straight from the battery, as long as you're getting a clear picture when using your LiveScope, I wouldn't worry about by passing the fuse panel. I've heard that some people who have lots of interference in their picture have ran power straight to the battery to help that issue. But I don't think its always the case.

@shanevang88 10 ай бұрын

Awesome vid! Curious as to why you didn't use the fuse box at the helm that you used for the garmin graph?

@Everydayfishing 10 ай бұрын

Thank you! Garmin and most people recommend that you run power to your black box directly from the battery to remove the chance of any interference. Theory is the more direct power the better picture you’ll get from the LiveScope. Not sure if it’s 100% based in science but it’s easy enough to do so why not

@scottmccrary9602 Жыл бұрын

Quick question, does the cable coming from the black box to the screen also power it? Or does the screen require its own power cable as well plugged in? So if its only dedicated for livescope the screen will have one or 2 cords connected to the back?

@Everydayfishing Жыл бұрын

The Garmin unit and the black box both require dedicated power. The cable that connects the black box to the unit is for data transfer only… so yeah, need to supply power to each

@rickgarza1041 Жыл бұрын

Great video. May I ask what brand/type double graph holder you're using? I have Lawrence HDS7 up front that I'd like next to the Garmin

@Everydayfishing Жыл бұрын

Thanks! The mount is the Hennessey Outdoor Electronics Dual Mount - I’ve been very happy with it hennesseyoutdoorelectronics.com/collections/hennessey-outdoor-products/products/hoe-universal-duel-mount

@rickgarza1041 Жыл бұрын

@@Everydayfishing I want to thank you again for your video. I purchased a LVS32 Transducer and GLS 10 Sonar Sonar Black box from BassPro. The sales deal came with free installation. But after talking to the service department there they said they would need to install wiring and battery shut off switch along with connectors for a extra charge. It was about $400.00 I knew immediately that I can install myself. They were going to charge me all that for screwing in the black box and connecting it to a 8 AWG wire to battery. Thank God I have tools and enough knowledge to do it myself. Your video just confirmed everything for me. Thank you again.

@Everydayfishing Жыл бұрын

@@rickgarza1041 Heck yeah - you can definitely do it yourself! Plus you get a good working knowledge of how it's all connected and it helps with any troubleshooting you might need to do in the future.

@williambigsby4031 2 ай бұрын

So, a network cable is needed to connect from the garnin graph to black box? How did you get power for your graph from a fuse block or did you go direct to your battery?

@Everydayfishing 2 ай бұрын

Garmin supplies you with the cable needed to go from the black box to the graph. I did run power from the fuse block in my drivers console to my graph. Power for the black box goes directly to the battery.

@RonnieWarren-xu2jt 26 күн бұрын

good job i must say

@jorgejuangarciaaparicio6583 Жыл бұрын

Dos preguntas: no hará interferencias con el motor eléctrico? Y la segunda, si el motor se mueve, con el GPS, cambiará la dirección del objetivo, no crees? Muy buen vídeo, enhorabuena.

@tommccoy6708 Жыл бұрын

It will not interfere with the motor. And yes it will swing around as you turn your trolling motor. You need a turret if you want to have the transducer independent of the trolling motor.

@sbdude52 Жыл бұрын

Thanjks but Id suggest a closer and better view of the supply wire connection to the blackbox and the battery

@rodrigoelgu Жыл бұрын

Question 🙋 so i have a kayak with a 100 amp battery for my trolling motor xi3 and a 20 amp battery for my 106sv do you think i can plug my black box to my 100 amp trolling motor battery and keep my 106sv on the 20 amp? Reason i want to split the power is i dont wanna have to buy another 30to 40 amp battery do you think i may run into problems if i split the power of the black box and fish finder, hopefully i made sense thanks.

@Everydayfishing Жыл бұрын

I don't think using different power sources for black box/graph is an issue, but where you might have problems is if you connect either to a trolling motor battery. Usually people get interference on the graph when it's connected to a trolling motor battery, so I would assume that also stands for connecting a black box to it. Rather than get a third battery, could you maybe just get a bigger second battery to power your electronics?

@robertcoggins5527 Жыл бұрын

Can you connect both a side view sonar transducer and the live scope to same monitor?

@Everydayfishing Жыл бұрын

It just depends on the head unit you get… you’ll need a higher end model with 2 transducer inputs… most like my 106sv only have one

@NelsonsRetreat Жыл бұрын

Good thing you put on/off switch on cause yes black box will drain battery

@caseymiller8737 10 күн бұрын

What kind of 8 gauge are you using?

@thereeldeal821 Жыл бұрын

Did you not connect the ground.to the ground screw on the black box? What exactly is the purpose of that ground screw?

@Everydayfishing Жыл бұрын

Yeah I did end up connecting it because the instructions said to - I guess it works the same way any ground does… some people say it helps get a clearer picture than if you didn’t

@Gloch9 5 ай бұрын

Is that silicone wire inside the white sheathing that you used for power?

@Everydayfishing 5 ай бұрын

Yeah each wire is silicone coated but outside sheath is PVC. The one I purchased is called marine duplex wire - on Amazon

@backcountrybrian3746 2 ай бұрын

I'm curious to know how your front graphs ride on the front Nitro metal plate? I hear the weight of two graphs causes the screws that secure the plate eventually loosen and you have to use larger screws to hold the plate down.

@Everydayfishing 2 ай бұрын

I have heard the same but I haven't had that issue yet. I've had them installed for almost 2 years now without the plate coming lose. Granted, I do check every couple trips to make sure they stay tight, but no issues so far.

@backcountrybrian3746 2 ай бұрын

@@Everydayfishing Thanks for replying, I'm sure you're a busy guy like me. I also have a Z18 (2022) that came with Active Target so I'm curious what gauge wire they used from the factory. I also have a power switch at the console that shuts off the Active Target box, which is located just a few feet from it in the front right storage box. Would you still recommend updating the wire from the battery to that power switch?

@Everydayfishing 2 ай бұрын

@@backcountrybrian3746 I would guess they used 10ga - which is the minimum Garmin recommends. If you're happy with the performance of the graph and livescope, I wouldn't worry too much about it. If the wire is accessible, you could run the unit for a bit, then try feeling the wire for any heat... as long as it's not getting too hot (fire hazard) then I'm sure it's ok!

@dfort5203 Жыл бұрын

How did you supply power to your Garmin fish finder? Can you hook it to the same power cord from the battery or will that cause interference with the black box? I haven’t started my install yet. I have a older nitro 750 and I’m keeping my helix seven on the front and then hooking a Garmin 1022 strictly for live scope.

@Everydayfishing Жыл бұрын

My Garmin unit power is connected to the power bank under my front panel. You could run power directly back to the battery if you didn’t have that option, but I just didn’t need to go that far

@dfort5203 Жыл бұрын

@@Everydayfishing Thanks, I don’t know what’s behind the panel yet, hopefully it have something simple to hook into.

@dfort5203 Жыл бұрын

One other question where did you get your eight gauge white wire? I went to Lowe’s. They didn’t have nothing but separate wires. I’d love to be able to just run one wire. Thanks.

@Everydayfishing Жыл бұрын

@@dfort5203 I found mine on Amazon - you can search for "marine duplex wire" and you should be able to find some. I used Ancor brand on mine.

@briankerr1438 11 ай бұрын

So did you have to run power from the graph also? The directions only show power from the black box to the battery and then the network cable from the black box to the graph. Greta video by the way!

@barryjacobs4627 Жыл бұрын

I watched your video and see you installed the unit in a Nitro z18. I have a Z7, same boat, just a little older. How many feet of the 8/2 flat wire did you use?

@Everydayfishing Жыл бұрын

I bought a roll of 25 feet and probably used about 20 feet of it… but my black box is also up close to the front of my boat.

@ELSuave7714 2 ай бұрын

What gauge wire did you use?

@stephhenwayne7045 Жыл бұрын

Are you not planning on using perspective mode? It appears that with this method of mounting there will not be enough play in the cable to change it to perspective mode

@Everydayfishing Жыл бұрын

Yeah good point - to be honest I haven't taken it out of forward mode! It's just so useful... but yes if I do switch modes, I'll probably cut some of that tape and give it more slack.

@music2178 Жыл бұрын

What Garmin unit do are you using? Did you need to update the Garmin so it would recognize the live plus?

@Everydayfishing Жыл бұрын

This is the 106SV - I did not have to do an update for it to see the LiveScope Plus... but Garmin recommends that you run the latest update when installing. It did work right out of the box for me though.

@music2178 Жыл бұрын

Thanks for reply and great vid. That’s great to hear as I just purchased the same stuff.

@SteveStallard Жыл бұрын

looks like you have the prospective mount set up for port side . Your motor stows to the starboard side. Am I seeing this wrong??

@Everydayfishing Жыл бұрын

I used the shaft mount bracket and I have it on the right side of the shaft... and my TM stows to the port side. So when stowed, the TM nose cone faces outward and transducer is on top.

@ELSuave7714 2 ай бұрын

What kind of red switches are those that you were using in battery compartment?

@Everydayfishing 2 ай бұрын

Here is the link to the one I used: a.co/d/8dSOoOj

@ELSuave7714 2 ай бұрын

@@Everydayfishing awesome tha k you for the knowledge and great video

@timothymcvay7286 2 ай бұрын

How do you still like the system would you recommend it or is there a newer version out today. Ty

@Everydayfishing 2 ай бұрын

The LVS34 is Garmin's newest livescope model - I would absolutely recommend it. I catch fish every time out because I spotted brush, rocks, or bait that I'd have never seen without it.

@Caydenculpfishing 2 ай бұрын

Been thinking about getting one don’t know which one to get Lawrence active target or Garmin live scope

@Everydayfishing 2 ай бұрын

I think the Garmin LVS34 looks more clear than the Lowrance AT2… Garmin has better target separation. Look up some comparison videos KZfaq. I’m very happy I went with Garmin!

@ThatTechJunkie Жыл бұрын

Just ordered mine last night, found one in stock.. did you figure out if the inline switch is needed for sure or not?

@Everydayfishing Жыл бұрын

I am pretty sure that turning the graph off or putting it to sleep does cut the power to the black box. My black box light goes out when the graph is off. So an in-line shut off is probably not necessary.

@ThatTechJunkie Жыл бұрын

@@Everydayfishing Very nice!, Tight lines bud!

@backcountrybrian3746 2 ай бұрын

Curious why you didn't use the power switch that was already on the boat?

@Everydayfishing 2 ай бұрын

The power switch already installed shuts off power to everything... I wanted to be able to only shut off the LVS34 Black Box. That's the only reason I added the second switch.

@czarbo1413 3 ай бұрын

I just got mine I’m only on a 10’ Bass Raider. Stupid question, do I still need my UHD56 transducer along with the livescope transducer?

@Everydayfishing 3 ай бұрын

No you don’t need it - I actually sold mine. You could keep it in case you ever want to use down imaging… but if your graph only has one transducer input, you’ll need to unplug the LiveScope to plug in the UHD56

@czarbo1413 3 ай бұрын

@@Everydayfishing ahh I gotcha, thanks!

@carlmcgee3602 8 ай бұрын

Does anyone know if I have to run a separate power cable for the livescope or can I use the same cable running my 93sv. I’m using a 8awg cable from the battery to the 93sv. Thanks in advance.

@Everydayfishing 8 ай бұрын

Yes your black box does need its own power source. I would run 2 of those cables from the battery and run one to the graph and one to your black box

@timothymcvay7286 2 ай бұрын

What's the unit model number are you using

@williambigsby4031 2 ай бұрын

Does it reqly make a difference if you use 8 or 10 AWG wire

@Everydayfishing 2 ай бұрын

All depends on how far your run is… the instructions explain what gauge is needed for certain distances. But I figure it never hurts to have higher gauge

@TylerCompas 2 ай бұрын

is the graph powered separately or through the black box?

@Everydayfishing 2 ай бұрын

Yes graph has a separate power supply - mine runs back to the fuse box inside the drivers console but you can also run it straight back to the battery.

@bobczz3919 Жыл бұрын

Why didn't you just tap off the backside of the trolling motor power plug for your power to the black box?

@Everydayfishing Жыл бұрын

That would have probably worked just fine - but from all I've ready about LiveScope, people seem to think it does best with a direct line straight back to the battery. Plus, I don't know what gauge wire was ran to the trolling motor by the factory, and if I run it to the battery myself, I at least know it's a big enough gauge wire to deliver enough power.

@bobczz3919 Жыл бұрын

@@Everydayfishing That makes perfect sense. Thank you.

@bobczz3919 Жыл бұрын

@Cooperman Your right , if it's 24v thats too much power.

@edgecrusher8605 5 ай бұрын

Is that your cranking battery you have it hooked up to?

@Everydayfishing 5 ай бұрын

Yes - power is run directly from cranking battery to black box. With that switch in between to cut power if needed

@Caydenculpfishing 2 ай бұрын

What battery do you use for the live scope

@Everydayfishing 2 ай бұрын

I ran it to my starting battery - it’s a group 31 AGM. No problems running it and my graphs for a full 8-10 hour day

@Randy-gz8eu Жыл бұрын

I'm trying to do mine . Why not use your existing switch ? Will that not work ?

@Everydayfishing Жыл бұрын

The existing switch cuts all battery power to the boat… so that would work if that’s what you want. I wanted to be able to cut power to just the black box in case I didn’t need the LiveScope or needed to conserve.

@Randy-gz8eu Жыл бұрын

Thank you !

@CHIPPOFISHING Жыл бұрын

I can tell you are very organized good thourogh tutorial as far as NOT having a designated LS battery,,,,carry some juper cables (thank me later on the way to buy a designated LS battery) ps SWEET CRIMPERS

@Everydayfishing Жыл бұрын

Thank you! So far so good with the starting battery… haven’t been stranded yet, but I do carry jumper cables just in case. Good advice!

@CHIPPOFISHING Жыл бұрын

plenty of room for that 4th battery, might as well make it the 29 series cheers mate

@bakervinci163 Жыл бұрын

I mounted mine sideways so I could access all 4 screws

@jaypowers2258 Жыл бұрын

Can I keep my 2d hooked up with the live scope

@Everydayfishing Жыл бұрын

Yes you can depending on which graph you are using... you'll need one that can connect to both sources. I've never ran both at once - you also might get interference.

@scottmccrary9602 Жыл бұрын

What size fuse does it call for?

@Everydayfishing Жыл бұрын

Instructions call for a 7.5A fuse

@scottmccrary9602 Жыл бұрын

@@Everydayfishing thanks

@simeonbonev4111 Жыл бұрын

Do you have to disconnect the black box/LVS34 when you pull the transducer out to change spots ?

@Everydayfishing Жыл бұрын

No you don't - when I change spots, I use the "sleep" feature on the Garmin graph, and this stops the transducer. I don't think I needed the extra battery disconnect switch that I installed - it does appear that all power is cut off to the black box when the Garmin unit is asleep or off.

@reign71100 Жыл бұрын

Nice install but I’d seriously consider adding another battery. You have way too much off of the cranking battery. If you can I’d isolate your electronics to that battery and keep minimal devices on your cranking battery. I know a few guys that needed a job for this reason. Otherwise great install.

@robertroebuck1633 Жыл бұрын

Did you have to run a separate power wire from your chart plotter?

@Everydayfishing Жыл бұрын

Yes I ran the power for the graph up under my console and connected it to the fuse panel there.

@RodF-xz6rf Жыл бұрын

Should use all of the battery post on top of battery. Big post for big wires.

@Everydayfishing Жыл бұрын

It’s all the same terminal… really doesn’t matter. But if I had large terminal connectors then I suppose I would have just to save space. Honestly just never keep those around.

@eagle5720 3 ай бұрын

Is it that hard to catch a fish or we just like new expensive electronics ?

@Everydayfishing 3 ай бұрын

Don’t bash it until you try it… forward facing sonar helps find structure, brush, etc. as well. Doesn’t catch them for you though! 😂

@eagle5720 3 ай бұрын

@Everydayfishing 😆 🤣 😂 I never understood nothing going on those graphs so I just used mines for GPS on my boat.

@GameFishermen Жыл бұрын

Hoping maybe my unit was a fluke, but my black box arrived broken… hopefully garmin customer service is good

@Everydayfishing Жыл бұрын

Dang that stinks… does it power on? Does your graph recognize it at all?

@steveabbott1202 11 ай бұрын

too close to the trolling motor head?

@sheaffergrubbs6056 2 жыл бұрын

Nice ....is it worth the money

@Everydayfishing 2 жыл бұрын

Absolutely… it’s incredible. First time out I was able to clearly see different kinds of structure, identify fish, make casts to them and catch fish. I’m super impressed

@sheaffergrubbs6056 2 жыл бұрын

@@Everydayfishing awesome.....as soon as the lvs 34 is back in stock I will order.....,

@andrewkoszuth6102 Жыл бұрын

Fuse should be at the battery.

@Everydayfishing Жыл бұрын

Unless your battery is within 6 feet of your black box, it’s pretty difficult to have it right next to the battery. Instructions specifically say to leave the fuse provided by the factory

@bakervinci163 Жыл бұрын

Pretty sure ur graph dictates power to black box

@Everydayfishing Жыл бұрын

I believe you are correct - my black box does appear to go completely dark when I turn off the graph

@itselectric3906 11 ай бұрын

@@Everydayfishing 1 question, 1 thought. Where did you find the switch? Maybe the switch will stop battery charging from back feeding box and plotter. Maybe not. Again where can I find the switch? Thanks nice video.