Installing Handlebar Switches 3 Button
Рет қаралды 41,729
Installing our 3 Button Handlebar switches on a Triumph Scrambler
Our Push button switches are some of the smalles on the market with a no fuss approach to making your handlebars as minimal as possible. We take you through the install on a custom motorcycle and share with you our tips and tricks to make it easy and long lasting.
Enjoy the clip and comment any questions you have!
Hit the link to see our range of handlebar buttons:
purposebuiltmoto.com/product-category/cafe-racer-handlebar-switches/
Also Check out our handy control module to make re-wiring your bike as easy as possible:
purposebuiltmoto.com/product/handlebar-kit-black-box-2-switches/
@jpalmiotti 3 жыл бұрын
This is the first video after watching every video out there (including every single Revival one and the manuals and tech articles I could view the past two days) that explains wiring from the M Switches straight to the M Unit. Why there aren’t any other videos that explain this baffles me... thank you. Conclusion: you CAN wire switches straight to the M Unit without connectors in between, and it’s OK to do so. Two... days...
@PurposeBuiltMoto 3 жыл бұрын
Well we use our own switches and our own “m-unit” called the black box. You should check it out for reference at purposebuiltmoto.com . There’s also heaps of handy wiring guides up there
@jpalmiotti 3 жыл бұрын
@@PurposeBuiltMoto amazing. I will! I’m new at all of this, but I’m going for it and can use all the good references I can get! Thank you!
@titandominik5427 2 жыл бұрын
I know Im asking the wrong place but does anyone know of a method to log back into an instagram account?? I somehow lost my account password. I appreciate any tricks you can offer me.
@axlbrayan60 2 жыл бұрын
@Titan Dominik instablaster :)
@titandominik5427 2 жыл бұрын
@Axl Brayan I really appreciate your reply. I got to the site through google and Im in the hacking process atm. Looks like it's gonna take quite some time so I will get back to you later when my account password hopefully is recovered.
@WorstCowboyEver 2 жыл бұрын
Dude thanks 🤘🏼
@mattduncan5500 3 жыл бұрын
So what did you assign to these 3 buttons. Also did you get rid of the choke on this bike/handlbars ?
@Warriorkikass 3 жыл бұрын
Great video, thanks! With these switches, can you wire them with OEM connectors and plug and play instead of the faff of m-units or such like?
@PurposeBuiltMoto 3 жыл бұрын
It can be done, but the better and easier way is to use our black box module or another control. module like
@warner6495 Ай бұрын
@@PurposeBuiltMotois there a video showing how to wire the black box module to say a stock Dyna or something of the like?
@BossDuck69 6 жыл бұрын
Would this 3 button unit be appropriate to use for my turn signals and horn functions? Interested potential buyer. Thanks.
@PurposeBuiltMoto 6 жыл бұрын
chase gilbertson it sure is mate, check out our website for more details
@PurposeBuiltMoto 6 жыл бұрын
Yeah it is Chase, check out our website, you'll need a black box to go with it for that functionality.
@MrForming 5 жыл бұрын
hi, This buttons can be start motor button? or only ligth on/ of? thanks
@PurposeBuiltMoto 5 жыл бұрын
Андрей Баранов you can use them for starter motor, lights, kill switch and horn
@oddis188 4 жыл бұрын
@@PurposeBuiltMoto hey. Do i need a m-unit to put theese on my bonnie or can i replace the ugly triumph originals? It's a 2004
@PurposeBuiltMoto 4 жыл бұрын
@@oddis188 Hey mate, yes you need a switching module. like the Purpose Built Moto black box, or the M-unit
@JoshTelm115 3 жыл бұрын
What diameter has the cable that you use/ are supposed to use? Many thanks
@PurposeBuiltMoto 3 жыл бұрын
It depends on the function but awg20 or awg22 is a good start point. If their signal only you can go smaller
@josephbilley9596 5 жыл бұрын
What if the original switch housing has a choke than how will they be used
@PurposeBuiltMoto 5 жыл бұрын
Joseph billey I move the choke to under the tank or directly off the carburettor
@seanboxer1521 4 жыл бұрын
That’s the answer I was looking for
@etienneE 3 жыл бұрын
After three years, thanks! As I am going to install one of these on my bike. What kind of wire are you using (core mm?)
@PurposeBuiltMoto 3 жыл бұрын
Hey Etienne, we use a 2mm cable usually. if you like a smaller type can be used depending on your application.
@etienneE 3 жыл бұрын
@@PurposeBuiltMoto Thank you! Keep on posting.
@ernestgutierrez9118 2 жыл бұрын
For Honda CBF supersport classic mortocycle 750
@eduardoperez7797 2 жыл бұрын
How to wire the 3 buttons with out the m unit thats my question any help thanks
@PurposeBuiltMoto 2 жыл бұрын
Use this module to make your switches work perfectly with minimla install time. purposebuiltmoto.com/product/handlebar-kit-black-box-2-switches/
@axa.axa. 4 жыл бұрын
kinda skipped right over the part where you have to drill your 3 switch clearance holes eh... that said seems as all you need to do is make that housing a few mm deeper and avoid the clearance problem all together
@PurposeBuiltMoto 4 жыл бұрын
Regardless you need holes for the cable entry anyway. For us the minimal design is better and the holes allow clearance so the cables won’t foul and short on the bars
@axa.axa. 4 жыл бұрын
@@PurposeBuiltMoto I suppose it depends on how proud the housing was made to whether or not you could get away with the clearance and one hole. I too wanted my buttons as flush as I could get and had to mill a rather large hole in the bar
@PurposeBuiltMoto 4 жыл бұрын
@@axa.axa. We have a few articles on the website showing the process I use. For my 3 button switches I normally drill 2 holes, 1x 8.5mm and 1 x 6mm. the smaller one is for the 2 button and larger for the single button side.
@oscarsanchezmendoza2274 5 жыл бұрын
if you use a metal hammer for your center punch you will get better results. dead blow bounces.
@mattduncan5500 3 жыл бұрын
can you expand ?
@oscarsanchezmendoza2274 3 жыл бұрын
@@mattduncan5500 metal on metal is usually how it is done, you would get a definite strike and mark as opposed to the rubber mallet hitting the metal center punch and giving you a "bounce". i didn't think as to that may be the only mallet you may have.
@mattduncan5500 3 жыл бұрын
@@oscarsanchezmendoza2274 got ya :)
@jennylopez9649 5 күн бұрын
Where did you buy 3 switch?
@PurposeBuiltMoto 5 күн бұрын
Purposebuiltmoto.com
@gregs8106 4 ай бұрын
What gauge wire are you using?
@PurposeBuiltMoto 4 ай бұрын
We use a 1.5mm or 2mm wire, good for up to 15A @ 12vDC
@mentalframer 4 жыл бұрын
What’s with the music?
@mattduncan5500 3 жыл бұрын
oh no ... video ended haha. I dont know where the end of the cables are heading :)
@PurposeBuiltMoto 3 жыл бұрын
Here's a couple of blogs to help you with that: purposebuiltmoto.com/motorcycle-electrics-101-re-wiring-your-cafe-racer/ purposebuiltmoto.com/2021-release-of-the-black-box-module%e2%80%a8/
@adityavenkatraman 6 жыл бұрын
Link to buy the button
@PurposeBuiltMoto 6 жыл бұрын
Aditya Venkatraman purposebuiltmoto.com/product-category/cafe-racer-handlebar-switches/?v=6cc98ba2045f Manners next time hombre :)
@adityavenkatraman 6 жыл бұрын
Purpose Built Moto apologies for the blunt question, I like the 3 button setup, but can I get the push buttons in black rather than chrome ?
@PurposeBuiltMoto 6 жыл бұрын
Aditya Venkatraman no problem mate, we all do it! My buttons are only available in raw stainless steel. The reason is The black powder coated ones I worry will wear off and look ugly.
@adityavenkatraman 6 жыл бұрын
Purpose Built Moto I understand that, and am willing to take that chance, coz the build I am looking at is an all black setup, no chrome, and this is perfect in all aspects, if you could do one for me, I would appreciate it, the button as well as the housing in all black, matt
@PurposeBuiltMoto 6 жыл бұрын
Hi Mate, Sorry but we don't do special orders like that. If you want the switches, you can purchase them and swap the buttons out
@X_Studios 4 жыл бұрын
Dont twist your are Pre-breaking the wire
@mattduncan5500 3 жыл бұрын
oh yeah ? good note
@christieelizabeth3752 3 жыл бұрын
@@mattduncan5500 Tom comes from an electrical engineering background. Twisting wire strands together doesn’t break them.
@brianmurphy559 11 ай бұрын
Apparently, you’ve never had to have solder cut out of your eye it’s very painful to get solder out of your eye! Best to buy some safety glasses, just saying
@evltwin984 Жыл бұрын
1st step grow yourself a stock standard hipster beard, then pretend to enjoy a $15 manuka honey & orange sandlewood craft beer cleverly named fizzy weazel
@PurposeBuiltMoto Жыл бұрын
Uh oh, someone’s ready my autobiography! Thanks for the fanboy comment, we love you too x
@mickwhitton7775 3 жыл бұрын
I just want to replace my stock Harley switches.. do I need the black box? What will happen if I don’t use the box? Thanks
@PurposeBuiltMoto 3 жыл бұрын
Hey Mick, It can be done without e black box, but the unit is designed to make your life easier. If you don’t use it you just have to use a few extra relays etc
Jason Derulo
Рет қаралды 95 МЛН