Installing Hunter PGJ Nozzles - Sprinkler Rotor Head

Рет қаралды 30,922

2 жыл бұрын

Hello Everyone and Welcome Back To The Sprinkler Channel! Today we are continuing on with the nozzles for the Hunter PGJ Sprinkler Rotor Head and how to select and install the correct nozzle for your given application when working with the Hunter PGJ. Feel free to subscribe to see all the other videos you will most likely find useful as you go about getting your lawn looking lush and beautiful. Let's jump in and look at the sprinkler spec charts for flow rates and other specs related to these Hunter PGJ nozzles and why they are important when selecting a nozzle to install in the Hunter PGJ Sprinkler Rotor Head. The PGJ is comparable to the Rain Bird 3500 Rotor Head and are interchangeable but have their differences so be sure to check out those videos on our channel that talk more about each. Tell your friends about the new kid on the block (that's us aka The Sprinkler Channel:) Love to hear if these videos are helping you and other questions you may still have after watching them. Stay thirty my friends....wait, I mean hydrated! Oh, and here is the link for the charts talked about in this video from Hunter's website: www.hunterindustries.com/node...

Пікірлер: 18

@alexmalard3865 Жыл бұрын

Thank you!!! you saved my ass. I was freaking out beacause i adjusted it too much and thought i had broken it. went through your videos and saved some money because i was going to call the sprinkler guy.

@robnamowicz8073 2 жыл бұрын

Really, really, really helped. I screwed up my sprinklers yesterday, don't have this exact model but believe I can do the repair. My nozzle shot out, but my area watered is mostly moss so was able to find it. Stay dry, brother, and if you are doing lake intakes, remember waders out work hip boots, because the hole at the top is higher,,,,thanks, hahahaha!

@user-yp3rd6pj5p 5 ай бұрын

Thank you for the info!

@SSCsled 2 жыл бұрын

First time visitor here! Great, informative video. I was able to get better performance by replacing the nozzles after watching your video. I do have a question.... on one of the screws, dirt appears to have settled on top of the screw, so I am unable to properly sit the adjustment tool. Any ideas/thoughts as to how I could correct this? I tried pulling the rubber cap/seal off the top of the head, but it seemed that I was damaging it.

@thesprinklerchannel 2 жыл бұрын

Awesome!

@floridagirl386 Жыл бұрын

@@thesprinklerchannel awesome?

@austynlynch6320 2 ай бұрын

Where do you get the nozzle sets? I can't find them on their website for the PGJ sprinkler

@thesprinklerchannel 2 ай бұрын

Typically nozzles come with a head but if there is a store for sprinklers exclusively then you’d be able to find just nozzles sold otherwise online.

@dlad455 11 ай бұрын

can you do the same void on the K2 Pro

@thesprinklerchannel 11 ай бұрын

Great suggestion, I’ll add it to upcoming videos.

@petarbulatovic8730 2 жыл бұрын

Just put your camera clouser next time or make zoom when important part comes🖐️

@user-yp3rd6pj5p 5 ай бұрын

Do you have to cut the holes on top?

@thesprinklerchannel 5 ай бұрын

No - push through pre-cut slices in rubber with tool

@pablocuervochaves5709 Жыл бұрын

desgraciadamente algunos no hablamos ingles, por lo que le agradeceria si fuera posible poner una version tarducida al español, muchas gracias

@thesprinklerchannel Жыл бұрын

Trataremos. Gracias a compartir esto.

@robeckel4965 2 жыл бұрын

That's not 5.0, by the way. That's 0.5. Take a look at how small the orifice is.

@thesprinklerchannel 2 жыл бұрын

You are correct. This nozzle set has a 0.5 instead of the 5.0.

@robeckel4965 2 жыл бұрын

@@thesprinklerchannel I think Hunter changed it from a 5.0 to an 0.5 at some point. There's a picture on the Hunter website of the old tree with a 5.0 nozzle in the place that there's now an 0.5, and their nozzle performance data lists data for the 5.0 but not an 0.5. I just installed a bunch of these PGJs in my yard, and happy with them so far.