Installing Hunter PGP Nozzles - Sprinkler Rotor Head

Рет қаралды 40,232

Күн бұрын

Hello Everyone and Welcome Back To The Sprinkler Channel. Today we are continuing on with the Hunter PGP Sprinkler Rotor Head about how to select and install nozzles for that sprinkler head. Feel free to subscribe to see all the other videos you will most likely find useful as you go about getting your lawn looking lush and beautiful. Let's jump and look at the sprinkler spec charts for flow rates and other specs related to these nozzles and why they are important when selecting a nozzle to install in the Hunter PGP Sprinkler Rotor Head. The PGP is comparable to the Rain Bird 5000 Rotor Head and are interchangeable but have their differences so be sure to check out those videos on our channel that talk more about each. Tell your friends about the new kid on the block (that's us aka The Sprinkler Channel:) Love to hear if these videos are helping you and other questions you may still have after watching them. Stay thirty my friends....wait, I mean hydrated out there because if you are in the West, the heat is getting crazy! Oh, and here is the link for the charts talked about in this video from Hunter's website: www.hunterindustries.com/site...

Пікірлер: 27

@EdwardGolden-o4t 7 күн бұрын

GREAT really GREAT EXPLANATION - Thank you for your expertise!

@mikeurban3996 2 жыл бұрын

This is definitely one of the best KZfaq instructional videos I've seen. He is thorough, and explains everything in sufficient depth and detail to assure the viewer will be successful, unlike a lot where they rush through glossing over important details.

@thesprinklerchannel 2 жыл бұрын

Wow, thanks!

@TheDylan6908 2 жыл бұрын

Very good presentation. Thanks

@theninerfan21 Ай бұрын

Thank you. Your videos have helped me so much. Thank you so much.

@danielchambers1958 2 жыл бұрын

Wow . . . another great video! Thank you for posting this information . . . subbed!

@sfdvr2 2 жыл бұрын

SUPER HELPFUL!!! Many Thanks

@muhammadshah7464 2 жыл бұрын

Very helpful thank you

@user-so9mi4mp5o Ай бұрын

Thank You!

@Mike-hb4pc 2 жыл бұрын

Excellent video! Thanks. I thought you weren't going to show us how to get a nozzle OUT of the head. Putting them in is easy. Getting one of those suckers out can be trying....

@thesprinklerchannel 2 жыл бұрын

Must have got distracted in not making the video too long. Check out our other videos and I know there is at least one of them that does. You can always just unscrew the set screw and turn on the water and let it fly:)

@chineseblogchannel Жыл бұрын

Thank you!!!!!

@larryaugust8205 Ай бұрын

Big box stores and Ace hardware in St Augustine FL don’t sell these,ordered mine on Amazon

@stacywalsh5884 Жыл бұрын

Thank you! My sprinkler came with zero directions!

@davidmicha2579 2 жыл бұрын

Just adjusted my four zones haha

@jayhibbs3623 Ай бұрын

I have a question. Can you change out the nozzle on a PGP nonadjustable?

@thesprinklerchannel Ай бұрын

Not familiar with the non adjustables but if they have colored nozzles with a set screw I would venture to say yes

@pocoloco453 3 жыл бұрын

Ah thanks a lot! Was just wondering what the difference is between low angle and normal!

@ZachPerry Жыл бұрын

Do the different nozzles throw the water at different angles? I was noticing today that my 2.0 nozzle seems to throw the water pretty high. If I put a 3 or 4 on there, will it bring the angle down? Or do you have to get low angle heads to get any change?

@thesprinklerchannel Жыл бұрын

Yes. The farther the distance / higher flow the steeper the angle.

@thesprinklerchannel Жыл бұрын

Low angle nozzles are an option for some models of heads

@goofball1810 Жыл бұрын

How to remove? U show it snap or hard to press in but how do u get it out when there's nothing to grab on to with a needle nose pliers. I have pgp-adj with completely round nozzle.

@thesprinklerchannel Жыл бұрын

Great question. You can back out the set screw and then turn on water. That will typically blow it out. Or since I usually am not planning to reuse it I will stick the rain bird tool in the orfice of the nozzle and pry it out that way. Hope this helps!