Any homeowner should feel blessed to have you two on their job site.

Probably the best Ryan's kzfaq.infoUgkxGZedDTcDfgD7fG_uU4esfx_EgxzlY2_1 Plans on building a shed is hardly ever found. And Ryan takes the mystery out of different types of foundation options, etc. He even shows how to build a shed with different designs. Very comprehensive, covering different roofing materials, siding, etc.

I would love to spend a month as an apprentice with y’all. Your work is amazing thanks for sharing your experience with us

I’m a sales rep at a metal roofing manufacturer in Tennessee. Always like finding new ways to advise customers, or just expand my knowledge from the standard methods we outline in our install guides. Love the content!

I worked in home building for fifty years. You guys are really slick.Also liked your good language. Thanks

I’ve been in construction for wu years, and you just taught me a trick! Thanks, I’ll be trying the awl punch on my next steel project…makes sense and will be far faster and better!

you're right, Kyle! punching the hole makes a clean hole while a drill bit leaves burs, and, like you said, it can walk a little. If you have a nice sharp hard punch, it definitely leaves a clean hole. I think it's nice to look up on something like that under a porch and see nice straight rows of screws also!

Great video and great work, Kyle and Greg! Start plumb, level, and square and everything else goes so much more smoothly! Fantastic!

Here you go Kyle some justice for you about using the Scratch awl to punch the metal. I used to drill! About two of three years ago I saw a video where you suggested using an awl to punch through the metal and as some of your other tips came in handy I figured "what the hell" and have never gone back to drilling. Due to damage from a stroke I no longer do as much roofing as before, but when I do I still remember many of the tricks you share in these videos. You do awesome work, never mind the know-it-alls who say this is better. Do what is right for you, and know that you helped someone improve his skills in many neat ways.

Love your videos! I appreciate your attention to detail and your goal to do the job correctly! Keep the videos coming!!

Punch is definitely my go to for metal, I've been there on walk outs. You and Greg do Great work! Love watching the videos.

It's always your attention to detail that makes you guys some of the best craftsman! I can hardly wait for Paul (Mr. PostFrame) Marshall to start my build, 60x120x16 shop/man cave!

Best metal builder great Job Kyle and Greg

So educational. You guys do an awesome job. Thanks for sharing.

Looks great Kyle & Greg. Well done buddies! 👍😁

Great video, great content, great explanation of of you guys do things for the ones that don’t do this for a living like myself

Great job professional

Very professional work. Thank you

Great planning

Every once in awhile you should throw in a "as my grandpappy once said"

Awesome job wish you were here in Piedmont SC I need a nice porch put on my house

Kyle your attention to detail and accuracy exudes quality. You can side my house anytime bro.

top notch work

A very interesting video thoroughly enjoyed it.

Wonderful and Interesting Video. It is always what to learn. 👌👍💪

Slick job!!

A slightly more caffeinated Kyle, today. Always fun!

Just a small tip, you should is a piece of scrap 2x4 to straighten your sheets that way you don’t risk bending the edges.

nice benders, never seen them before.

Since you guys have plenty of time to chat about the materials being installed, it would be great to hear a little more about their long-term characteristics. For example, how well does this metal roof do in hailstorms? How does it compare in total cost versus a shingle roof, which is common in residential builds in your Illinois area?

I've put a light fixture through the center of a rib and it looks pretty good

The way you operate by spending the time to ensure your framing is square, level and plumb from the start, pays dividends for every step that comes later. Especially trim work.

I have those thin recessed lights in my bedroom, hall and Bath when I rebuilt my mobile home. I like the make up boxes! They allow you to plug the light in after you make up the wires in the box. Ideally also, you can replace the light without tearing into the make up box again. The ones I bought have 1,500 lumen all the way up to 5,000 lumen, so I can pick the color of my lighting. I think I ended up setting mine on 3,000, and you don't have to worry about where they fall when it comes to sheetrock ceilings because the lights I bought are thin enough to allow me to mount right on a ceiling joist and still still sit flush, and they have two strong spring clips that hold them up! I think I got the Halo brand from Home Depot, and they have 3" and 6"; I used a couple of 3" over my bathroom vanity to get an even lighting over the sink and counter top area. Really nice lighting option; also, the Halo brand has threads on the pigtail from the box and the pigtail on the light has a nut to secure them after you plug them in. It insures they get a good connection and you don't get arching and a fire down the road because of a loose connection! Great lighting option, I think.

I had a pole barn built by the Amish. They modified a framing nailer, to punch the holes in the metal siding.

Eso es ser un buen patrón.. valorar a su gente.👍

Everyone needs a Greg

Be careful Ben, Arctic White is one of GMs hardest colors to match. Be sure and check the alternates. Great video.

I like your work a lot - precise and well thought out ahead of time. The designers should have raised the roof of the porch another 6 inches to be one plain with the house roof - now snow and water can get in against the house.

Удачи вам и творчества.

Good gosh my brain hurts. You are so intelligent. Great job

I definitely prefer the bird boxes on the eaves. Not a fan of the straight angle to the outside of the facia

That is why I prefer finish carpentry, cut to fit. Still might need a board stretcher though):

You ought to tape the gutter apron to the roof sheathing. Do you guys seal the underside of the end of your roof metal?

Have enjoyed all your videos. Need some help. I am in the market for a new laser. I need one that works inside, outside, and with a slope. I have been searching but I have one that gets me excited. Do you have any suggestions? Thanks a mil...

It's very good to watch your recordings, if I may say something, it would be nice if in the episodes there were a few minutes of your working time, for example, from a break or casual conversations. Knowledge and skills are interesting, especially if you combine them with light entertainment, and after all, a break is also an important element of every job. It's my suggestion but the videos are great I love watching and best regards, keep it up.

Hey Kyle or anyone else watching. On that first piece you cut then bent for a 2/12 pitch against the house. Right before you installed the facia cover metal, on the opposite side, you cut a little square notch. What was that notch for? Thanks

Hey Kyle...the steel application you used for the ceiling on the porch, can that be done over top of an existing wooden ceiling or would I need to remove the existing ceiling first?

the fact of the matter is that it goes faster and is more accurate to punch it than drill the steel. ppl can say what they want, punching is faster and more accurate

did he say dead nuts lol love it

@rrbuildings , what work boots are you rockin? Mine are dead but they hurt my knees.. in the vid the other day I noticed yours had kurfs in the sole and looked like they could be a comfortable boot on concrete and dirt sites all day. Thoughts?

Why no enclosure strips under the roof on the porch?

Do you need to seal the ribs/channels on the house side of the porch ceiling or is that a non-issue? I was thinking like bees or other things.

Now we know the ribs don’t line up you need to change the title of the series to “Worst House” 😂

Hey Kyle. I have a really cool detail for hip cap at the eave if you would be interested? I think you would really like it.

How many nails have your stepped on that went through your feet?

"We just punch, it works good" is probably the most unintentionally funny phrase AND the best life philosophy rolled into one. RR spit'n life lessons hahaha

Greg should get a nice bonus for coming up with that 90° bend to go into the j channel. Hell of an idea. I guess some homeschooled kids actually do learn a thing or two. 😂 Also, what pencil is that you're using? Looks far superior to traditional contractor pencils

Thank you.

Do we need to have a permit to built the porch like this?

While I’m not a fan of white roofs it doesn’t absorb heat like darker colors. That combined with a well insulated and air tight envelope you may be able to heat that home with a hairdryer, and cool it with an ice cube! 😂

Do u install metal porch public and much cost to for 10×12

❤

Who is running the camera?

Kyle, what hammer are you using?

If Chris Pratt was a builder!

Why isnt drip edge under the roof underlayment?

Do u install steel porch for the people

Is that the bottom or did you order white metal?

How much does it cost for this project please?

So who do you have filming now?

Whats the name of that metal roller bender tool?

at about 16:00 'I'm not sure that I like this drill too much' Kyle how many drills do you own? we need a count.

whatever you're laying under the metal roof, I haven't ever seen that before. What is that product, Kyle?

What punch are you using? Last roof I pre-drilled the holes and it walked like crazy on me.. never doing that again...

I cut my fingers three times watching this video.

you mentioned that your porch roofing didn't exactly match the building roofing, the ribs. But it looks like it does at the start but gradually falls out of line. Why?

In the UK houses are built with literally minimal or no over-hang. It's so ridiculous considering that the weather year round is s # # t!

Just a few observation.. That house is sealed up so tight, it's not a house anymore. It's a submarine. Also, with that short gap between the main roof to porch, I'm left wondering about birds and wasp.

Dude, I've never worked with ribbed sheet metal in my life. Why don't you drill your pilot holes?

This eas really awesome. Kyle, are you a bit cold? Your voice was a bit hoarse Cheers from Sweden

Ten years closer to ..... 🤫🤔🙃😉

What was that white bottle thing being used to fill nail holes at 17:53?

25:16 So what's preventing that screw from leaking?

If others get away with saying lickety split, I’m sure you can use the phrase dead nuts. 😊

🏴󠁧󠁢󠁳󠁣󠁴󠁿👍

So 1 problem I see with your porch ceiling to wall detail: When the homeowner takes the water hose or pressure washer to clean up dirt and spider webs (every porch gets this way) and applies water to this detail, water can make it's way behind the exterior wall covering. I understand why you do it the way you do, for ease of install, but when this issue is considered I think it would be worth to explore another method. I'm still trying to come up with a better solution....

inchitis! lol

I watched you put this roof on. It was my first video from your channel. You said the concrete was not flat. You measured everything with a laser off the highest (or lowest point) for everything else. That confused me. I like your channel, and I will continue to watch. I also watch Mr. Post frame. But when you built the mezzanine in the big place, you measured from the bottom not the top. I am not criticizing, just confused. Glen

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👀👀

just wondering what your partners name is ? how many times do you need to say Greg in a video?

All those openings at the end of the ribs and that end cap are perfect places for bees, moths and small birds. I don’t understand what none of them are sealed.

Trying to get a hold of you on telegram I can't find you?

The word he said I can't.................wtf............. send this guy . back to home..................

Kyle, maybe it’s just me, but you seemed to be a bit out of breath in this video. Did you notice it yourself? All okay?

Nice work 👏 love how you still do it to a T even if no one will ever see it ! My kinda work too 😊 #JESUSisALIVE

Greg's awesome but I think that he was in a bad mood .

An ugly ending trims It looks unfinished, and No gutters installed why?

Punching seems super smart to me. Keeps the shavings from getting in between the sheets and scratching up the paint.