love how you've built a budget turbo civic, an immaculate BRZ on bags and now an LS swapped S10. you have so much variety on the channel it's crazy

Move the holes in the axles 1/2" so the axle slides back and you dont have to shorten the driveshaft, you can do that when you need to move them anyways.

Found your videos as I’m gearing up to swap my 99 s10 definitely gets me pumped.

Really looking forward to see the (L)S10 rolling again!

Your amazing Robbie ❤️ love the s10 vids can’t wait for more🔥

Your videos are perfect for learning more about the S10, thank you

This video is the only reason Im changing my rear end on my 91 s10 5.7 swapped im running 2010 Camero 20 inch wheels and 5 inch lowering blocks. Always heard it wasn’t to hard and this video just made everything easier !

Keep the good work!!! Love your stuff

dude you should consider some fender flare action on this thing i think it would look sweet

i love your videos man one of the only car channels i can follow. much love ❤️

you know what dude i was having a pretty bad day and then I saw you posted and my day immediately got better, I really appreciate you and your content man

I think the kansei’s look sick on the s10 honestly, like you said just slap a meatier tire on there an call it a day, I’d figure out how to get them on the front as well! 🤝

The wheels suit the S10 wayyyy more than Genny!!! I think it looks killer!!

Builds mint man keep up the work homie

So happy with the variety of content

S10 videos have been fun. Thanks Robbie.

this truck has so much potential keep it up robbie

Truth is that I love the way it looks with them wheels

Let’s go baby s10 vids r the best

Naw these videos aren’t boring I love them man 🔥

i miss the s10 wish we still saw it around on the channel.

Nice! I've been wondering when an s10 update was coming. Im in the process of Ls swapping an s10. I narrowed the 8.8 before swapping the motor in.

Man i love this project please keep it up :)

I love you Robbie. You’re my favorite KZfaqr by far

Damn I'm early for once!!!! Can't wait to see this build complete!!!

Let’s goooooo another Robbie post

Super sick Stay committed 💯❤️‍🔥

You can buy ford spring perches on summit racing for literally $12 a pop if not less... Cut the old off, get you a level angle gauge so you can set the angle of the yoke and weld em up!!

It will probably be better in the long run to just cut the spring perches and move them since you mostlikely need to change the pinion angle also.

in 7:34 i thought he was pulling that shit effortlessly and i was like "man was robbie this ripped?? i fell bad i he has some hatter and he finds them...." and then realization came as hard as a truck

Constant content‼🔥🔥

good video friend! a question why the differential of my s10 is more on the left wing, to someone who looks well established.

What’s so crazy is that I personally would not own any of Robbie’s vehicles. Not that they aren’t nice because they are all beautiful. Just not really my style, but I always watch every video because I love Robbie. It’s not about the cars for me (yes I love watching and learning about cars) but I love his drive and personality 100 times more then the cars he builds.

Dude it's gonna a be lit!

WHOOOO BABBBYY ROB ROB

Ok I’m stuck on this, will a factory s10 driveshaft and rear fit or work for a swap? I’m keeping the engine stock for the most part

What transmission did you end up doing because I’m using a power glide

Notif SQUADD

To measure for a drive shaft. Put the yoke all the way in the transmission. Then measure from the outside edge of one universal to the center of the other. This way you have about a 1/2 inch of play for suspension travel so it doesn't hammer the internals of the transmission on bumps.

Those wheels are a hell of a vibe

Get a slip yoke eliminator those help a lot it worked for my Jeep when I put a 8.8 in it

❤love it man. Low is just a small part of the look.

we literally had a junk 97 explorer at my school and someone from another course came and got the limited slip diff before the truck got scrapped… they are very popular lol

I can’t wait till it’s painted

Isnt the 8.8 ford diff has a longer side than the other so you would have to end up cutting and welding it to same fitment?

I'm no professional, but I believe the rear-end U-bolt goes over the rear end and through the spring perch. At least that's what it is on my s10 and I kind of want to keep the rear end you know.

Nice video.How far off center was the pion?

Your going to have to shorten the drive shaft you can’t take away from your slip yoke because if you do it’s still super close to the trans and can run the risk of jamming in the tail of the trans and hurting it. Shorten the drive shaft and keep the proper spacing needed for the transmission.

Best rear fir the width , love mine

Goat

Order has been placed

I had a slammed 88 Mitsubishi might max. It had 9×16s all the way around. It poked almost 2in.. the only thing that sucked. Not having power steering lol

You could say that the FORD (got) EXPLOREd ;)

Just for your knowledge its called ford EXPLORER not ExPLoDer😁 hahahahahahahahaha , Great video by the way

What’s the rear wheel tire setup?

The funny part is Robbie said it’s giving “socal vibes” and I’m from socal and my s10 basically looks exactly like that wheel setup 😂

What I'd love to see is a Volvo build one day, you know would be sick! This s10 build is gonna be hella sick, just like every other build you have, keep rocking Robbie!

Hey man i wouldnt bore the holes if anything make some rear shackle brackets with bends in them and the front bushings should do fine on the other end , boring the hole seems like it may cause some issues down the road with the block wiggling loose ? Maybe .. hahaha i just work on cars and seems sketch! Hahaha

The yoke out of the S10 fit the 4L60 because the S10’s had 4L60’s

What Rims are those? Size? Bolt pattern?

Wish we were in did you use out of the truck

I got a 9" from Quick Performance with new rear disks brakes, clutch type posi, 3.83 (ish) gears, new axels with the 5 on 4.75, centered with my specific length (no extra charge) etc. for about 2K shipped to the door. My numbers for the 8.8 swap would have been close tot he same BUT I can swap third members easier so i also got a third member with 4.56 ratio for racing. An option for those with out the skills or time. I really dislike seeing those aluminum spacers for a drop kit. I recommend the metal ones and most fix the driveline angle change (Top is slopped 3 degrees?). My two cents, seen to many break/crack more so in high power or ruff road/off roading.

Id Deffinetly keep the sway bar , itll help with the v8 power and cornering .

Yay

I think the rear end housing is not center on the ford 8.8. One axle housing is longer than the other. Looks like passenger is longer than driver. A lot of people shorting the longer side to match the shorter one. Then they buy 2 of the same side axles. If that makes sense? Lol anyway. Keep up the good work. Love the s10 content.

Robbie's fabrication GARAGE !

What junk yard is this that makes you wear safety vest?

Trokiando cuhhhh

Look for 96 and newer S-10 or Blazer with 4.3 and manual. They have bolt in 8.5" factory

Hey I got a 97 explorer with the same rear end

1:21 is robbie saying ford explorer or ford exploder??😂😂

Lol those breaks sounds like a knife sharpening up or pulling out a sword

I'd definitely keep the sway bar if you intend to drive the truck on the road much.

If i send a small sticker for the s10 will you put it on it

Idk how I got this early but I'm not complaining.

How about u grind it down a little on the rear end that bolts on just that little to make it fit

bed mounted turbo???

I love the committed crew logo but a jacket or a shirt with a outline or cartoon of your car would be sick

Robbie cuh tackuachiando in the LS10 love to see it

i also would love to see you join the volvo community i would love to see my favorite car guy on youtube join the swede speeds

When came's new EG videos Love your videos

I like those rims on it

Jags that run has a setback pad for leafs

Me putting around the city in my BRZ with Brembo breaks... SQUEEEEEEEEEEEE

"In this episode, Robbie wraps his hand around a tiny little dinker."

aye its chris

Cool, wrong bolt pattern, offset rear (one side longer than other), almost the Ford rear you really want.

Yee Robbie so cal af lol you just need a sunroof

300k 👀

Hey robbie just wanted to say it'd be better if u played different music during the cuts

any one know what wheels those are

I'm so jelly, wish I could mess around with cars trucks all day that I haven't a clue about 😅

Widebody s10👍

Hey robbie, if you want you should install fuel cell in the S10

Explorer❌ exploder📈

Are those shackles on wrong looks weird?..

I think I'm honestly gonna have to get the same tattoo you have on your hand

New wheels for the truckie

The wheels look better on the s-10 then the genesis lol

Earlyy squaad