Installing Premium Air Con Vents on a BA BF Ford Falcon

No video

Installing Premium Air Con Vents on a BA BF Ford Falcon - DIY Upgrade

Рет қаралды 6,240

Күн бұрын

How to install premium air vents on a lower spec BA or BF Falcon. Easy DIY job that should take you 10mins at home. All you will need is a Philips head screwdriver.
Support the channel by picking up some garage tools here:
www.amazon.com...
Check out the full build series here:
• Ford Falcon BA / BF Ute
Other Useful Car DIY Videos:
EASY: How To DeBadge Your Car: • EASY: How To DeBadge Y...
Windscreen Chip Repair Guide - The Costs, and REAL Results: • Honest Windscreen Chip...
Car Window Tinting Tips For Beginners: • Car Window Tinting Tip...
Snow Foam Test - Worth the Time and Money?: • Snow Foam Test - Worth...
How to Clean Your Car: • How to Clean Your Car ...
Follow on:
KZfaq (Subscribe): / @horus_works
Facebook (Like): / horusworx
Twitter (Follow): / horus_works
Instagram (Follow): / horus_works
Tik Tok: horus works
Disclaimer:
This video is made to entertain and guide you in your car journey. I hope you’ve learnt something new like I have by watching this video. Please note however that you are solely responsible for trying the techniques displayed. Please follow proper safety practices and understand that this channel is not responsible for any damage caused to you or your property when following along with the channel’s content.

Пікірлер: 39

@mickyLat3652 6 ай бұрын

I like the way you take time & conduct work in a clean manner without the rip, tear, bust that some others do when working on cars. Subscribed due to this. I have a couple of cars but love my BA XR6 Ute. Cheers

@Horus_Works 6 ай бұрын

Thanks a lot mate, I appreciate you saying so, and for subscribing. Falcons get a bad wrap I find... maintained and looked after, they can go for a very long time.

@tonylashmit2613 Жыл бұрын

Nice easy upgrade ! Looks great! Definitely like the blacked out lower trim idea you are pondering!

@Horus_Works Жыл бұрын

Thanks as always Tony! Now to decide on whether to buy them used, or simply re-colour the ones I have... 🙂

@jaradrockley Жыл бұрын

Thanks heaps for this video the ba xr6t I’m restoring/ updating/ upgrading had the single vents , so I wandered down the paddock to an xr6t parts car I have and it had twin vents So thanks for the tip Subscribed !!! 😂😅

@Horus_Works Жыл бұрын

Awesome Jarad!! Thanks for subbing mate and glad you found this helpful 👍

@happymanasfksubaru2846 Жыл бұрын

Hi what year is your xr6t mine is 04 it's standard

@giacomopuglisi9590 Жыл бұрын

Hi Erick, I know you have always good ideas to upgrade and to give the most better look to your cars. So go on ..☺️👍

@Horus_Works Жыл бұрын

Thanks my friend, I appreciate it 🙏

@Dann_Keevers 6 ай бұрын

Ive owned 2 XR6's my first was a 2004 BA it had these double air vents, my second is a 2006 BF MKII which does not have these vents and frankly I'm glad it doesn't.. My BA XR was practically brand new when I bought it (only had 98,000 k's) it had an excellent AC system, AC max would literally freeze you and with these double air vents the lower vent was literally 3-4 inches from my knee .. I think you can see where I'm heading here... As it did not have a shut off door in the vent it would literally freeze my knee so much I could not use the AC max function... Sooo glad my BF does not have this....

@julianalderson3938 10 ай бұрын

Be on my last to do list. But yer bro thanx

@lyndellfazekas1839 Жыл бұрын

Lovin the look. Great little improvements 😊

@Horus_Works Жыл бұрын

Thnaks!

@berkc06 Жыл бұрын

Looks so cool man. Great mod!

@Horus_Works Жыл бұрын

Thank you mate - I appreciate it

@jamesmcroad7601 7 ай бұрын

Don’t forget to upgrade the poverty ICC as I love to update my BF XT with a Fairmont Ghia or Fairlane speck dash plus door cards etc as I’ve got the station wagon

@Horus_Works 7 ай бұрын

Kinda suits my ute, but I know what you mean 👍

@Dann_Keevers 6 ай бұрын

Why not just buy a Ghia ???

@motdraw12 11 ай бұрын

I'm doing the same now with my bf ute but spraying the pieces st silhouette black like the outside.

@Horus_Works 11 ай бұрын

Awesome Tom!! Hope this video helps you, and hope I can count on your sub 😀👍

@eddiemanjerovic 8 ай бұрын

Love your work , upgraded my single air vents to dual with woodgrain spears , just love it. Thank you very much for the idea 🙂. Just wondering what rims you got ?

@Horus_Works 8 ай бұрын

Most welcome mate, happy to see that the vids are useful. The rims are Vertini Drift.

@klepptomann Жыл бұрын

Upgrade the Povo pack Stereo should be your next move. You can get the same silver to match your spears.

@Horus_Works Жыл бұрын

Thanks mate, I have been thinking about that... still wrestling with whether I should go Kayhan or premium Ford ICC....

@klepptomann Жыл бұрын

@@Horus_Works I went the Aeropro replacement and an Alpine head unit. Costs a bit, but best thing I've done.

@gerardcrabb4556 3 ай бұрын

Different models got different species interior and ICC units costs would be made up in price of higher models...

@SuperHoermann Жыл бұрын

Hey man, what's the trim part called? I've tried googling and searching but can't find any 😂

@Justin_Batten 7 ай бұрын

Hey mate was wondering what sand paper and paint you used and how much did it cost for the vents roughly?

@Horus_Works 7 ай бұрын

Hey mate, the vents were $40 for the set from memory, and as far as materials, I got a can of Ford liquid silver, Acrylic clear, and 1500 grit sandpaper.

@Justin_Batten 7 ай бұрын

Ok thank you

@deanodino123 Жыл бұрын

Hey mate how did you go removing all the bubbling paint on the handle inserts ?

@Horus_Works Жыл бұрын

Hey Dean. it's actually not paint but a metal wrap of sorts... I used a blade knife to start an edge, and then slowly peeled it all off by hand. It took about 30 minutes, but once the metal wrap is off, you can plastic prime those pieces and then paint and clear. Hope that helps 👍

@deanodino123 Жыл бұрын

@@Horus_Works thanks mate

@jerryyan9456 Жыл бұрын

Hey mate what paint did you use for the trims

@Horus_Works Жыл бұрын

Hey Jerry, I used a can of silver auto body spray paint. Firstly I hit the plastic with a plastic primer, then silver auto body paint, then I cleared all the silver. Looks schmick, and the clear is protecting the silver from scratches 👍