No video

Installing Shimano's New Deore M6100 12 Speed Drivetrain with the 10-51t on Project Trifox

  Рет қаралды 102,172

Jamesthebikeguy

Jamesthebikeguy

Күн бұрын

Let me know what you think in the comments below & Don't forget to subscribe!!!
- Visit my Website: www.jamesthebikeguy.com
---
- Check it out at my favorite shop: www.Landrys.com
---
- JBG Merch and Support the Channel: teespring.com/...
The Gear I use:
-----
Accurate Escali Scale: amzn.to/2qhO6Fm
-----
Canon EOS M6 Camera: amzn.to/37lG0yH
-----
Lavalier Microphone: amzn.to/2HdYiai
-----
Camera Tripod: amzn.to/2qfKdk4
-----
GoPro Hero 8 Black: amzn.to/38mHU3k
-----
Google Pixel 4: amzn.to/2UM9kf6
-----
Lav Mic for Gopro/Phone: amzn.to/3bwiF0d
-----
Cell Phone Gimbal (Bikes Shots): amzn.to/37gU10h
-----
My favorite bike shop: www.landrys.com
DISCLAIMER: This video description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.

Пікірлер: 166
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Check out my 2nd channel: Jr's Gasoline Alley where I review R/Cs Cars and DIYs - kzfaq.info/love/pRReJABfwDGgsfSTYiItUg
@larrycole8673
@larrycole8673 3 жыл бұрын
Always appreciate your no nonsense straight forward insight, info. & tips.
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Glad to share the knowledge. Thanks for watching!
@cycleriderroy
@cycleriderroy 3 жыл бұрын
The build is looking solid
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Thanks!
@samsung.5090
@samsung.5090 3 жыл бұрын
Roy
@dominicwalker9947
@dominicwalker9947 3 жыл бұрын
Good build clinic James. Thanks for taking the time.
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Thanks for watching!
@jimbo4203
@jimbo4203 3 жыл бұрын
My new bike came with Deore and it's been working great so far !
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Good to hear!
@satuwarnayt
@satuwarnayt 3 жыл бұрын
I have used this groupset on my polygon siskiu d5 bike ... steady and comfortable to use in all terrains
@billsomerset238
@billsomerset238 3 жыл бұрын
Good video. I've replaced a few cables and watched a lot of them. But I've never seen anybody file the end for the reason you mentioned. All they did was open the end with a pick or awl. Very interesting.
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
In a shop they would pre-cut and then use a bench grinder to get installed. Flat is key to long lasting shifting performance
@eberthmolina1292
@eberthmolina1292 3 жыл бұрын
Nice build. i've seen in other videos when they measured the chain in full susp bikes, they used to remove the shock to get the max lenght for the chain to avoid the pedal kick back
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Depends on the drivetrain and suspension design. This is a modified single pivot so it won't suffer a huge amount of chain growth. Shimano also specs this chain sizing for a full suspension setup. A bunch of ways to go after the same thing
@weastan
@weastan 3 жыл бұрын
Great build, I think everyone is waiting to see you riding the trifox
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Me too. One day lol
@tristandesade8635
@tristandesade8635 3 жыл бұрын
If you happen to live where one pays for medical procedures, your doctor also looks forward to you riding it😈
@witkidone
@witkidone 3 ай бұрын
Dude there’s a little mark on the back of the derailleur that shows you the exact correct b gap. Look at the back of the gage through the spokes and set accordingly and badda bing badda boom!
@AndreReese.BizLLC
@AndreReese.BizLLC 3 жыл бұрын
Thanks for this! It's exactly what I needed to install mine.
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Glad I could help
@jeff7086
@jeff7086 3 жыл бұрын
Just a bit of detail that is note worthy, when installing the smaller gears (at least on the 12 sp SLX and XT) make note of the spacers between the cogs, the thicker spacer goes on first; otherwise the index spacing of the shifter will not line with the cog spacing. Also the numbers stamped on the cogs face outward thins is only an issue of the sprockets that are not on the freehub. third make sure the final sprocket is fully seated in to the groves, it is possible to put the lock ring on with the sprocket slightly off kilter, the chain wont sit pretty on a crooked gear.
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Good notes for anyone watching/reading.
@Cyromantik
@Cyromantik Жыл бұрын
Extremely well explained, I only wish you could have zoomed in or highli to some of those tension bolts as I'm quite new to this! :)
@chrisbalser3808
@chrisbalser3808 3 жыл бұрын
Interesting video. I think the light grease is a smart yet easily overlooked touch. Like the idea of filing the end of the cable. Great video!
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Thanks for watching!
@kornofilo
@kornofilo 3 жыл бұрын
I'm thiking of doing this same build, only with the frame in full black or a more blue-ey colour. Will keep checking on this project, looks very fun!
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Thanks for watching, review dropping soon
@davidcrowson4745
@davidcrowson4745 2 жыл бұрын
Your videos are very pleasant to watch.
@fendigucci6307
@fendigucci6307 3 жыл бұрын
i had to look persnickety up i never heard that word before thanks for the new vocab.
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Haha happy to help with your vocabulary! 😂
@caedenchapman5373
@caedenchapman5373 3 жыл бұрын
I think there is a correct b-tension indicator line on the wheel side of the Derailleur cage, maybe that would help with a bit quicker b-tension setup?
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
In retrospect you are correct.
@chrisbraun72
@chrisbraun72 3 жыл бұрын
Did you forget that there's a "B" tension guide stamped onto the inside jockey cage to line up to the largest cog???
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Must have overlooked that.
@chrisbraun72
@chrisbraun72 3 жыл бұрын
@@Jamesthebikeguy glad you at least found it. 👍
@steveinoz8188
@steveinoz8188 Жыл бұрын
I had shifting problems with the slx groupset on my Polygon T8. The cable kept working its way forward till the loop at the derailleur was getting pulled too hard which resulted in poor shifting. As it turned out, the cable needed a drop of oil at the head stem end grommet so the outer could slide back and forth.
@johngeoffreyvincentfrancis4866
@johngeoffreyvincentfrancis4866 3 жыл бұрын
James is the wizard when it comes to bike mechanics. Very informative video. Can the Shimano 12 Speed Drivetrain accommodate a rear hub having quick release boost 141 measurements? my current setup is a GT Pantera Sport.
@thecarguye8680
@thecarguye8680 Жыл бұрын
Did you ever find out
@aranyicsaba3943
@aranyicsaba3943 4 ай бұрын
Great video. I was wondering if I could use Deore M6100 with a SRAM 11/50 cassette. Many thanks.
@charlieseymour3438
@charlieseymour3438 2 жыл бұрын
Great video. I'm actually in the process of building the same bike, same components. Not to be too critical...but your using the file incorrectly. It only removes metal going away from the tang.
@njm3211
@njm3211 3 жыл бұрын
Thanks James
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
You got it
@freefeel2346
@freefeel2346 3 жыл бұрын
Hey, James! Thank you for video. Can you give some links to online stores where I can buy it with delivery in other countries?
@cyremixofficial
@cyremixofficial 3 жыл бұрын
u can find it on amazon
@tomaskonkol8894
@tomaskonkol8894 3 жыл бұрын
Nice watch Citizen Skyhawks.
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Thanks, its a great work/beater watch
@mirceammd
@mirceammd 3 жыл бұрын
Thanks
@charlesberkley7060
@charlesberkley7060 Жыл бұрын
Hi, how has the Chinese frame held up over there years and what type of riding did you do with it also will you still recommend?, please answer
@larrycole8673
@larrycole8673 3 жыл бұрын
Great info. James👍
@ghassanmustafa615
@ghassanmustafa615 Жыл бұрын
For full suspension bike isn't necessary to remove the rear suspension or emptying it then pushing the rear wheel forward for better chain measurements?
@14TacomaDR
@14TacomaDR Жыл бұрын
isn't there markings on the small gears for proper alignment ?
@mcduffrobert
@mcduffrobert 3 жыл бұрын
Hey James, does that frame come in a longer travel. I believe you said it was 100 mm travel
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Depending on the shock you choose 100-120mm this will be 115mm dude to the 52.5mm stroke
@dyeraldnosis2128
@dyeraldnosis2128 3 жыл бұрын
I hope someday I have this kind of drive train
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
You should get it!
@dyeraldnosis2128
@dyeraldnosis2128 3 жыл бұрын
If you have old parts and you don't use maybe you give to. Me 😂joke
@brekobreko7945
@brekobreko7945 3 жыл бұрын
Very informative vedio, i want to know what type of bottom bracket and crank you used
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Here is my video on that very thing: kzfaq.info/get/bejne/h7RdetiS256XZoU.html
@joeytoribio2035
@joeytoribio2035 3 жыл бұрын
thank you for this! everything I needed to know before I assemble my custom build from scratch. I'm using a 10 speed cassette (11T-46T) on a 8/9/10 MTB11 shimano FH-MT400-B hub. will I need spacers for this install or will the cassette fit without any spacers/shims? Not sure if the cassette comes with shims so i'll order them if needed so I'm not stuck during the install.
@athishmarutharaj6001
@athishmarutharaj6001 3 жыл бұрын
Great build, I really want to change my 3X8 drivetrain setup on my oldish Ghost Kato to a 3X12 and I think your rear setup Might do the trick. I am not sure if any 12 speed rear derailer would accept 3X drive. Anyway, Keep up the good work!
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
That would be cool!
@adamputu5448
@adamputu5448 Жыл бұрын
James Sorry How To Remove The Freehub Body, That New Tech Microspline Tool Or I Can Using HG Tool?
@openwheelracing88
@openwheelracing88 Жыл бұрын
so if I have cruchy sound shifting to largest cog, I tighten B screw to increase b-gap? If I have cruchy sound shifting to smallest cog, I loosen B screw to decrease b-gap?
@rodsoliano7054
@rodsoliano7054 3 жыл бұрын
i learn something, thanks
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Glad to hear it
@zazvorrogue7391
@zazvorrogue7391 2 жыл бұрын
8:30 where you have a sureness that the cable is guided into the right place? I have a problem with this. Any manual on web please?
@boybakalismyname4515
@boybakalismyname4515 3 жыл бұрын
thanks to this video, do you have any video like this installing slx, xt and xtr?
@MEOW-rc1ht
@MEOW-rc1ht 2 жыл бұрын
Was the hubs used there also a shimano deore m6100?
@ashrichmarco3332
@ashrichmarco3332 3 жыл бұрын
I got a slx m7100 1x 34t crank set and 12s slx right shifter paired with M6100 10-51t cogs, FH-MT500 microspline hub, deore RD, 12s chain.Does my set combination good?
@nathanabby12
@nathanabby12 3 жыл бұрын
Will it fit on a Giant Talon 1 2021? I already have 10 speed shimano Deore.
@athishmarutharaj6001
@athishmarutharaj6001 3 жыл бұрын
I am pretty sure your freehub should accept a 12-speed cassette however I am not sure tho. Yet I have seen people doing an 11 speed to a 12-speed conversion easily with Shimano without getting a new freehub so good luck!
@lowelllomberio
@lowelllomberio 3 жыл бұрын
Is the lower chain line a little closer on the rear wheel when you are in the 51t? Coz thats the case for me
@dannyvisitacion8975
@dannyvisitacion8975 2 жыл бұрын
Hi James what size is your rim 622x25 or bigger than that That trifox is so beautiful.Thank you
@Jamesthebikeguy
@Jamesthebikeguy 2 жыл бұрын
Thanks it's a 27mm wide rim
@subramanyamuralidhar5931
@subramanyamuralidhar5931 3 жыл бұрын
I've Bergamont helix 4.1 bike with 3x8 speed. I'm planning for drive train upgrade with something like a Shimano Tiagra or something similar to that and also go for disk brakes. Can you please help with a) feasibility, b) does it warrant wheel change, c) approx cost.. I live in a town called Mysore in southern part of India.. Thanks
@gabrielcalata1849
@gabrielcalata1849 3 жыл бұрын
I have a question sram cogs 12speeds is compatible for deore grp set?Not including the cogs of shimano because i dont like the color silver cogs i like blk cogs like sram 12speeds
@do_not_rotateyour_phone3957
@do_not_rotateyour_phone3957 3 жыл бұрын
Helpful content man. Just curious. How many links did you remove from that chain? and how many teeth does your chainring have? I'm planning to buy same exact frame as yours with that same drivetrain. Thankyou in advance
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Glad to help, but no idea as far as how many links were taken off. Go through and do it for your setup
@kamalgurung9405
@kamalgurung9405 Жыл бұрын
Bravo
@ericsalazar8681
@ericsalazar8681 3 жыл бұрын
Hello. What microspline freehub body or XD drive will fit on my bontrager rythym comp hub?
@helboundking
@helboundking Жыл бұрын
Do they make 29" fat tire bicycles?
@michaelbranchfield3543
@michaelbranchfield3543 Жыл бұрын
Treck Roscoe 6 could I put 36 chainrings on it
@ahs9583
@ahs9583 11 ай бұрын
What the 10-51 stand for? I’m new in the bike world and I’m trying to upgrade my bike
@johndef5075
@johndef5075 8 ай бұрын
Rear cassette teeth. Smallest cog is 10 teeth. Largest is 51 teeth.
@litochan9722
@litochan9722 3 жыл бұрын
Im about to buy a deore 6100 group set. I would like to know whats the different between a deore 6100 30T and a 6100 32T?
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
2T... (Thats the chainring size)
@junboo8730
@junboo8730 3 жыл бұрын
Wow didn’t know the b tension did so much in the shifting. I have a problem that when I pit too much torque the chain jumps and I loose momentum. Usually is in the highest gears. I did try everything except for B tension also I may need to replace the cable. I have like 1,700 miles in that cable maybe is time.
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Cables and housing should be part of regular maintenance
@junboo8730
@junboo8730 3 жыл бұрын
@@Jamesthebikeguy Thanks, I think at this point that is exactly my problem.
@colbyntx8578
@colbyntx8578 2 жыл бұрын
Hey James, I have a new Polygon Xtrada 7. It came with the Deore 6100 10-51 drivetrain. It was shifting a little rough in the middle gears. I have lightly ridden the bike, not crashed once. I finally put the bike on the stand to really inspect. The 8th cog from the bottom was bent about a 1/4”. Is there a way to fix this or do I need a new cassette? The bike is three weeks old, crazy! 😡
@Jamesthebikeguy
@Jamesthebikeguy 2 жыл бұрын
Prob reach out to Polygon for a warranty
@fewkilometersaday
@fewkilometersaday Жыл бұрын
which bushing size you used in there ?
@mattlyone3147
@mattlyone3147 3 жыл бұрын
What kind of stem you have on it. Love the color of that bike
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Industry Nine A35
@sherwinbantilan7401
@sherwinbantilan7401 Жыл бұрын
Hi what is your rear hub??
@emreaydn2606
@emreaydn2606 3 жыл бұрын
Hi,I have 24 rim MTB bike does it fit 11-51 casette on My bike
@michaelsharry6330
@michaelsharry6330 3 жыл бұрын
Good video 👍
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Thank you
@hanyaoyap1826
@hanyaoyap1826 3 жыл бұрын
Sick!
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Indeed 🚵
@simonmailhot4260
@simonmailhot4260 3 жыл бұрын
Nice video! I have a question : I am a newbe in ebike. My new ebike has Shimano 1x10 cassette system with Shimano Deore SL-T6000-R Rapid Fire Plus shifter . Seller placed shifter on right side but with gear indicator NOT FACING ME... :-( So , I think to transfert it to left side, for FACING me ... :-). What any new shifter choice(s) on the market would I have to solve this problem? I found NO shifter Shimano Deore equivalent to be installed on right side to change my 10 speeds. Weird situation! May be you or somebody else could have any explication for that? Thanks to help me.
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
What bike did you buy setup that way? Sounds odd that the indicator is facing away from you.
@gbgwapo5816
@gbgwapo5816 2 жыл бұрын
What hub r u using?
@BH-cy9tb
@BH-cy9tb 3 жыл бұрын
I want to use a 11-51 Deore 11 speed cassette I have not a xt 11 speed 11-42 can I use the 12 speed derailleur with the 11-51 11 speed cassette. Thanks, nice video.
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
No you cannot.
@jimmyandres1865
@jimmyandres1865 3 жыл бұрын
Hi When u put the fast speed, jump to much... Like the chain bouncing against something, that's normal?
@athishmarutharaj6001
@athishmarutharaj6001 3 жыл бұрын
try to turn your cable barrel on your derailer anti-clockwise and /on your shifter towards the seat post to tighten the cable. it worked for me on my Acera 8 speed and SRAM GX but make sure you play around with it. Good luck
@Asthbendriel
@Asthbendriel 3 жыл бұрын
Make sure the clutch is enabled. If I recall correctly, Deore RD can also adjust the clutch tension. It's also natural for the chain to bounce more on the smaller sprockets then the big ones, whenever you're descending, it's a good practice to keep your chain from the middle or slightly upwards.
@MaxudX
@MaxudX 2 жыл бұрын
Спасибо!
@bgib23451
@bgib23451 Жыл бұрын
3 stars
@Laharl42
@Laharl42 3 жыл бұрын
Is it normal on deore 12 shifting kinda Hard? Ive noticed since using the new deore 12s, its shifting is Hard.
@kadirilbay4085
@kadirilbay4085 3 жыл бұрын
No, its really soft. Maybe the your cables dont adjusted correct
@inyourears2596
@inyourears2596 3 жыл бұрын
What do you recommend shimano deore 12spd or sram sx?
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Deore
@TucsonDude
@TucsonDude Жыл бұрын
Wow...why not use a torque wrench rather than a "crescent" wrench?
@Jamesthebikeguy
@Jamesthebikeguy Жыл бұрын
At what part of this install is a torque wrench necessary
@TucsonDude
@TucsonDude Жыл бұрын
@@Jamesthebikeguy When installing the lock ring. A good "umph" is very subjective. I believe the torque is 40nm. Why not be accurate?
@junmendoza2089
@junmendoza2089 3 жыл бұрын
I'm 52years young but still kicking n pedaling my bike,however my bike is only steal bike n I want to have a high-end bike.
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Keep on pedaling!
@bendaff9618
@bendaff9618 3 жыл бұрын
Nice video
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Thank you.
@karllagangan5807
@karllagangan5807 2 жыл бұрын
how many chain links if i use 36T chInring? thanks
@Jamesthebikeguy
@Jamesthebikeguy 2 жыл бұрын
Depends on your bike
@melvinrafaelestrada8937
@melvinrafaelestrada8937 3 жыл бұрын
156/5000 Hello good night friend, a question where I can buy the complete Shimano groups for example Shimano Ultegra Di1 normal, no disc? Greetings.
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Your local bike shop
@melvinrafaelestrada8937
@melvinrafaelestrada8937 3 жыл бұрын
@@Jamesthebikeguy Soy de El Salvador, me es dificil comprar aca los grupos completos. : (
@jonathandaseco7408
@jonathandaseco7408 3 жыл бұрын
How many teeth of chain ring in front 1x12 ?
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
They make all different sizes
@tristandesade8635
@tristandesade8635 3 жыл бұрын
Time for a smartpants comment: That “Trifox” bike looks awfully lot like a Scott Spark...😏
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Lol agreed. Geo is significantly different, but no question who they took "inspiration" from lol
@delubzgamer4550
@delubzgamer4550 3 жыл бұрын
skyhawk?
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Good Eye.
@fisiculturista0113
@fisiculturista0113 3 жыл бұрын
👍👍👍👍💪💪siempre. Firmé🚴
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
👌
@plmania444
@plmania444 3 жыл бұрын
Is there an option for a shifter with indicator/window?
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Not that I know of
@chrisbraun72
@chrisbraun72 3 жыл бұрын
@@Jamesthebikeguy Yes it comes with both window and without window options because I had the choice when I ordered mine
@stephenchapman166
@stephenchapman166 3 жыл бұрын
did you put on dt swiss spline
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
No. Thes are industry nine wheels.
@connornauseda3062
@connornauseda3062 3 жыл бұрын
What hub is on that beast
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Industry Nine
@CharbelChabo
@CharbelChabo 3 жыл бұрын
bro can i install 12s speed on HG hub with 11S ?
@matthogan4905
@matthogan4905 3 жыл бұрын
not shimano, Shimano 12 speed cassettes are microspline, not HG. I believe the SRAM 12sp cassettes are HG compatible and will work with Shimano shifters
@rodrigobraga1921
@rodrigobraga1921 3 жыл бұрын
Hub mt410??
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
These are Industry Nine hubs
@precilaibanez6428
@precilaibanez6428 3 жыл бұрын
What's the size of the frame?
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
19"
@precilaibanez6428
@precilaibanez6428 3 жыл бұрын
@@Jamesthebikeguy thanx man, can you review the new 2021 trek fuel ex5 next. Appreciate the reply. . . 🇵🇭🇵🇭🇵🇭
@davao0506
@davao0506 3 жыл бұрын
you can you any hub for that?thanks
@fazza2104
@fazza2104 3 жыл бұрын
What
@davao0506
@davao0506 3 жыл бұрын
Cookie oh sorry..i mean can you use any kind of hub for that?thanks
@aaronkal7433
@aaronkal7433 3 жыл бұрын
He got the 80eight shirt
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
I own to many of them. Anytime a GTR goes up, I gotta buy a shirt lol
@aaronkal7433
@aaronkal7433 3 жыл бұрын
@@Jamesthebikeguy their the ones that give cars away right. I dont blame you
@danielsepulveda912
@danielsepulveda912 3 жыл бұрын
Im buying a Trifox frame
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
What color?
@danielsepulveda912
@danielsepulveda912 3 жыл бұрын
@@Jamesthebikeguy X10 Carbon Road Bike Frameset (CAMO COLOR), I just saw it in the website; Great price and few high detailed reviews like yours show this is a brand you can ride with no fears
@rheymarkroldan4618
@rheymarkroldan4618 2 жыл бұрын
I hope you choose to give me a bike because I've been dreaming of having a bike for a long time ... in case of the hardships of our lives here in the province, we can't buy a bike ... I'm one of those who always watch your vlog. ..I'm from the Philippines ... I hope you choose me
@ridingwithpat7251
@ridingwithpat7251 3 жыл бұрын
Isn't trifox a Chinese brand?
@jonc5422
@jonc5422 3 жыл бұрын
Yea
@Jamesthebikeguy
@Jamesthebikeguy 3 жыл бұрын
Indeed, looking to see how it compares to the bike shop brands I normally ride.
@jimbo4203
@jimbo4203 3 жыл бұрын
@@Jamesthebikeguy i think their all Chinese a yway
@stevencole7331
@stevencole7331 3 жыл бұрын
@@jimbo4203 Yes many frames are made in China but they are engineered and created where the manufacture resides . They use professional mountain bikers for input at times . This brand is engineered ( maybe copied for the most part ) and manufactured in China and is a Chinese brand . You dont hear much of Chinese mountain biking so basically they have seen another industry they can undercut the competition which they do very well . Now you are not getting the legal protections for this frame . The question really is will the frame hold up to rigorous riding and at worst case catastrophic failure on a more extreme effort on the trail which can lead to injury .
@BMH1965
@BMH1965 3 жыл бұрын
Shimano systems have supplied cable housing for years - it looks like you don't know what you are dealing with - this is not confidence building for the viewer.
Shimano Deore 12 Speed Groupset | GMBN Tech First Look
12:53
GMBN Tech
Рет қаралды 231 М.
这三姐弟太会藏了!#小丑#天使#路飞#家庭#搞笑
00:24
家庭搞笑日记
Рет қаралды 101 МЛН
拉了好大一坨#斗罗大陆#唐三小舞#小丑
00:11
超凡蜘蛛
Рет қаралды 14 МЛН
Люблю детей 💕💕💕🥰 #aminkavitaminka #aminokka #miminka #дети
00:24
Аминка Витаминка
Рет қаралды 662 М.
Shimano Deore Vs. XT 1x12 Transmissions | What Really Is The Difference?
9:32
Global Mountain Bike Network
Рет қаралды 427 М.
Shimano Drivetrain Comparison - XTR vs. XT vs. SLX vs. Deore
16:02
Worldwide Cyclery
Рет қаралды 1,1 МЛН
BEST VALUE 12-Speed MTB DRIVETRAIN - Shimano Deore 12s Review
8:40