Thanks for watching the video today! I have included links for a couple spoiler options in the video description! Please consider subscribing for more Subaru content.

I just did this install, using this video as my primary guide. If you are reading this, a couple of pointers would really help. One, the holes on my template were correct, but there's only one small reversible template. It's a good idea to make a duplicate of the template using two pieces of regular printer paper taped together. Both those templates to the assembled wing, and put it on top of the trunk in the desired position. Measure from every angle possible to get the spoiler exactly where you want it. Then grab a few additional pieces of paper and bridge the gap between the two templates and tape everything together. Now you will be able to lay a full-sized single template all the way across the trunk like he did. Don't separate the sides, because you could get your holes just a little bit misaligned. With the entire template in place, measure again from all of the holes to the corners of the trunk and the front and the back to make sure that everything is exactly symmetrical. Now take a tiny drill bit and drill your initial guide holes. Additionally, you may want to go buy a hole saw to attach to your drill bit. One of the holes has an access hole underneath and you can easily put your ratchet extension in there. But the other hole you are going to need to make yourself. In the video, he did this with a 5/8 inch drill bit, and it got a little messy. Same thing happened to me. Instead, I used a hole saw bit attachment for my drill, some WD-40 to lube the metal while I was Drilling, and it cut a very nice clean hole. Makes it much easier to access from the bottom. $15 at Lowe's. Works great! Otherwise, great video! That helps a lot! Thanks!

Thank you for doing this video! I received a spoiler with no template at all and was wondering how I'm going to create my own. I had the idea just like you and glad to see it worked for you. Now onto making my template just like you did. Thanks!!

I love this video! No lame overly loud dumb music in the background. No immature slang, or holding your fist over your mouth saying “damn”! Just basic no nonsense install video. Great job!!

I know this was years ago but definitely the video I needed. I got my wrx and now it’s time for the wing. Thanks so much!

This is the best how to for this on KZfaq man! Where did you get the adhesive from, a hardware store or online? Or it came with the wing?

gonna do this to my 2013 at some point. adds so much character

Some days I wish I bought that color WRX but I love mine.

This is done so professionally Beautiful work done

Great video and super helpful! Question, how was the quality and how has it been holding up since this video? Is it secured all the way/any wobbling? Thinking about ordering one!

I like the way it came out. I have the same car and color and was thinking about putting on a spoiler. Thanks for the video

Really nice man. I've been waiting to see how this turned out for you.

i just got the new static wing from victorracing for subaru and ur vid helped quite alot tnx

Thanks for the video! I’m about to do this install.. it’s scary the template didn’t match the spoiler.. I wouldn’t have thought to check that! I will make sure to check my template! The spoiler looks sick!

awesome video! thanks for the tool layout.

How did you locate the holes? Would have been useful of you showed us that part.

Hey can u put a link from where u got it from

Love the park bench

Hey mate, doesn't look like you used a deleter to cover the removal of the OEM wrx wing. Did you previously remove it and fill/spray the boot? The deleters are fine, but yours looks a lot nicer!

#HeyBoo👋🏾 great tutorial I will use this vid when I put mine together in a few weeks. Just ordered it an hour ago 🙌🏾

Going to install this today after watching this video, Mine didn’t come with a template at all, so I can use masking tape or paper, To install the wing by myself, I’m gonna tape it down with double sided tape so it stays in place. I might make a video too

Hey it might be great to see how your template relates to the existing template, the new holes will be offset so that's all you need to know is the offsets.

Great stuff on here man awesome channel will be subscribing!

Looks Good man 👍🏼 Great job!! dropped a like and sub

Right here you got me beat my boy cause you are drilling holes! Don’t know if I am ready for that. Going to need a 6 pack of big boy juice! Lol

I think you may have skipped the part where you determine where the new holes should be on your new template.

Now you need to swap your torsion bars to the sti ones or else you will damage your trunk over time.

hey mate, looks really good. How is the quality tho? I can see it on the website now for like $226 painted. So I'm wondering about the quality. The price is kinda cheap. Does it stick to your trunk like an OEM one or you can see imperfections? Thanks, -E

At 6:14 how did you go about transferring the drill holes exactly? You removed the two separate templates, placed them at the base of the wing and carefully marked them? Afterwards reattached the two templates back onto the trunk in the same exact position as prior?

NICE!!! CONGRATS!!!!!!

Did you take the stock lip spoiler off? And do you need anything to prevent the wing from hitting the back windshield or is it fine?

Nice Video man! May I ask where you get this spoiler?

Could of used original templates by remarking them with proper spacing..or paper strips that are lightly taped to wing over hole and then after getting the spoiler where you want, taping the strips down. - I use to install spoilers and bodykits for a custom shop during college.

Any updates for the wing? Paint fading? Is the sturdiness holding up?

Hey as a heads up. there's an extra i in spoiler in your title.

Looks great man!

Thank you! Very well made video

I bought the same spoiler and ikon said they dont give templates. And gave me no adhesive. So now i have no way to drill it

Do you know what screws you used when you installed into the trunk? I bought a spoiler but didn’t come with any screws so im looking into what id need.

Are you skeptical on the 4 bolts holding it to your trunk? I feel like they are not quite enough to hold it on doing 80 on the freeway

only 2 tiny screws on each end holding massive spoiler? I believe OEM spoiler is hold by 4 screws on each end.

im planning to get this www.ikonmotorsports.com/2015-2019-subaru-impreza-4-door-wrx-sti-style-rear-trunk-spoiler-abs.html how was the fitment? bad fitment or perfect? please lemme know. Thank you so much.

Hello bro i am from malaysia....can we install it on toyota vios 1st generation ncp42...tq

Did your car come with WRX spoiler lip? If so, what did you have to do to remove it? Were there any bolts involved or was it all adhesive?

I just bought a spoiler from them, should I expect my template not to line up too?

That wing tho 💪

Might not get a reply , but how did you get rid of the small spoiler on your WRX prior to the STi wing install?

I know this is super old lol, but the template probably didn’t match cause it was designed to match up with wrx’s with the lip on trunk

HOw's the weight of this, did you have to get STi torsion bars? How much are they

I wonder if it possible to do on a 2017 Ford Focus se. the body is actually similar to the Subaru wrx and I see a few done so but hard to tell if it was a 2017 Ford.

Hey bud, question! When you ordered the wing off of IKON MotorSports, How much was the wing total with it painted, i was seeing like two prices, and how long did it take for the wing to come in from the time of purchase? Also in a comment below someone had asked about torsion bars for the trunk if you use it frequently what is that exactly

They gave the wrong template? That's so dirty. Great video thought bro, I'll be getting my wing this week and doing the install this weekend.

How has the spoiler been for you?! Any issues with paint? And any cracks in the wing itself?

So I was looking into ikon Motorsports the wing I want is a pearl white but the problem I’m having is it has a lot o mixed reviews about the paint job and how it’s in even can anyone tell me if the purchase is good for those who own this wing .

Looks awesome man!! I cant decide between the sti wing or a stupidly huge wing lol.

Ordered one of these from a similar company. Only issue is the bolts they provided were way to small. What size bolts did you use for mounting the spoiler to the trunk?

Great content on your channel thanks for sharing

Great Vid! Will deff be using this once I install my spoiler.

Does this work on the 2018 wrx or do I need a trunk swap? Thanks in advance for reply.

Did you have to change your deck lid springs?

Where did you get the trunk without the tiny lip spoiler?

did u install the sti spoiler on the wrx trunk or u need to get the sti trunk to install the sti wing?

Great guide! best one on youtube. Do you live in Fairfield, CA?

How did you get your spoiler from shaking while driving??? I got my spoiler from subiespeed but the spoiler only comes with two screws on each side.

Can you use RTV for the spoiler base gasket?

Hey can you link the spoiler? Also how is it holding up?

How were you able to drill so easily?

What’s this spoiler called on ikon Motorsports??

Did the roll of gasket stuff come with kit

CAN YOU POST A LINK TO THIS KIT?

My template says start iwth 9mm, but doesn't tell you what the final drill bit size is, every video uses two bits, do you know what drill bits I need?

Did the diagram come with the wing?

What did you do with the 4 holes that come from the WRX lip?? Or did you trunk swap

Did your spoiler came with the template and hardware

What’s the link to buy this wing???

Bro. The one and only thing I wanted to see is how you marked out the holes… didn’t even show us that

So the car didn't comes with a wrx low profile spoiler lip ???😕

Great job!

What drill bit was used?

Did you take off your deck lid spoiler? Or did your trunk not have one?

Looks clean bro 💯

What’s the drill size

Hey how did you get the stock spoiler off? Like the little lip?

2mm Gap? did you mean 20mm? or maybe 2cm?

Did your bolt covers come painted? I got the same ikon wing in white pearl and they came black

How much did the sti wing cost

Hey man i just subbed to your channel did you order this through their website or did you go on ebay?

They failed to send those gaskets with my kit, do you remember how thick they were?

did the drilling template come with the packaging or did u get it from somewhere else?

you bought an aftermarket spoiler and they gave you a template for the oem spoiler

Where did you buy the drill template????

Good job

Two thumbs up!

could you please scan your template and send it to me by mail, since I have the spoiler but not the template and did not find it in any store, thanks

U took the bottom off it did not come ready to drill wtf lol

HI where's buy this wing?

How much was the kit to do this?

I put one on my t.C. 2016. Looks cool. Yes I know Its not a rear wheel drive car. BUT. I don't give a shit.

hey man i have a question can i use that to my 2013 ford focus se? tnx

Hows the wing holding up so far?