I want to buy the kit, we're can I purchase it?

*show

if you mean the china engines that will need its own custom mount made to fit it. this just fits the stock engine

good for you ive sold a few dozen stretches I make my way and would probably hold up way longer then yours putting all that stress on the cut off bar and the frame, not to mention mine can set whatever angles you want and not forced with only 1 engine angle, along with full suspension travel on stock shock Fattys have already been done and sold for a while too

Ill pay you to install one on my Yamaha vino 125cc

unfortunately he was found dead

+DK EVOLUTION you can chop the front forks to lower it up front, take out the spring to lower the rear. thats about all you can do stock

Can i just buy and use your suspension adapters so i can fit a ruckus aftermarket lowering suspension? Thank you again sir.

no but you will need longer rear brake line, using the ruckus rear brake line will work People usually use the ruckus swingarm because the ruckus has a slightly wider rear wheel and more tire combinations because of the longer swingarm where the met wheel is very skinny and cant use anything larger because of the short swingarm Also using ruck swingarm you dont have to shave the plastic fender area to clear the wheel and you get full travel of the shock absorber with the attachment I include for the rear shock I never tested that on a met swingarm and most likely will need to shave the plastic rear fender area as the tire could hit Just something else to think about I wanted to have the use of the rear shock You can always go hard tail with the met swingarm then no risk of the wheel tearing up the plastics But its a good ride with suspension Look up my username on instagram I have many pics of my met

I would need the bike here to make a mount as its different. I have no access to one. It should be possible to do it though

I will post on this channel when more are available, should be by next month. they will also go on eBay too

sweet! thank you, i followed you on fb

im not on Facebook, if you are following me send me the link because I want to see who is using my name and what they are posting

Mike's Bytes will do right now.

+Micscience well make a video of your own install and lets see how you do it better

Micscience ร

Is your kit still available? I would like one.

Its anyway to contact you. I need to send you mind metro 2013 or to buy the whole kit from you

you think you can do better? show it but its been two years since you commented on this video yet you haven't made one

you can cut the bar off the aftermarket stretches and still use it, but its alot of stress on that cut bar as it would only be held on with 1 bolt and not the correct engine angle as the ruckus engine angle sits differently then the met thats why I used the side straps, to get the correct angle that way the bottom of the engine doesnt drag on the ground, thats the engineering put into it Plus you can set the engine height to get whatever look your going after I try to get the engine to sit up as high as I can, then when you sit on the bike the suspension moves it down to the correct angle for the rear shock mount its easy enough to make your own shock extension with flat plates and bolt it on many have done this, you dont need to buy a $60 eye to eye extension and a ruckus shock you can also buy 1x1 square tubing and make a hard tail mount to get the exact stance you want too, dont need to use suspension in the rear but I like a softer ride You can also modify that stretch to install a fatty rear wheel too, but then you will need to make a offset rear shock mount for sure

no, I don't have access to one and they are different

2013, no totally different setup buy regular stretch on ebay fatty kit available on special request so thats not posted on ebay

mikegigabyte where are pics of the fatty kit and whats the price?

I sent you a message I sell these stretch kits

mikegigabyte OK. My g mails not working. Does the kit you make come with everything you need, or is there more stuff ill have to get? Thanks!!!

Andrew Baughman I did send you a link to where I sell them in a message on your you tube channel I will also update the description on the video with the link to buy everything comes to install the stretch, and rear suspension stretch, bolts, rear suspension brackets you will still need to get other items for the bike if you want it to look like the one in the video like longer brake cable, ruckus swingarn, ruckus rear wheel

mikegigabyte I know. i looked at it. I was just wondering if its the full kit or if theres other stuff i have to buy. im new to this stuff and just trying to get familiarized with it. Thanks.

Andrew Baughman once you get your e mail working email me instead mikegigabyte@gmail.com or join that site I posted a link to and message me on that site I can tell you everything you need to do to make the bike look like the one in the video

No, but heck it looks good

​@@DSloot "Beauty is in the eye of the beholder." Times ten.

what is that some clone scooter only if the engine has the same exact mounts as this honda engine most likely not

yea ill have to look at one with mine but would love to do this

Timothy Hebert you could just extend the engine mount back to stretch it but the main problem is your stuck with your tiny rear tire these honda bikes the swingarm can come off and install a longer one which allows a taller tire to be put on also I was able to add a 7 inch wide rear wheel on these bikes now too which we call a fatty rear Im going to see if I can add the fatty picture on this video or I may make another video showing it since I sell the stretch I also sell the parts to install the fatty wheel now too

here are the links www.ebay.com/itm/201783244020?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 www.ebay.com/itm/192077966780?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

awesome thank you

I have a Chinese 50cc Verona scooter which looks identical to the metropolitan. do you think this kit would work?

making more , soon on eBay , once I have some for sale I will post here in the title too and you can buy directly from me or eBay

I need one of your kits. Are they still available?

Are the kits still available?

+doirealyneed1 To keep the front wheel on the ground due to all the power available.

Cause it looks dope you square. SMH

mikegigabyte You say it comes with ability to lower it. do you just shorten the two side braces? and get a lower shock?

Mike's Bytes im doing a ruck swingarm swap, no stretch.Will my ruck shock reach it to the original metro mount on frame ???