Installing The BEST Suspension Upgrade For The Toyota Supra! H&R Lowering Spring Instalation

Рет қаралды 14,153

Жыл бұрын

👋 Lets do the first suspension upgrade for my brand new 2023 Toyota Supra! Installing the H&R lowering springs is one of the best first suspension mods to increase the handling characteristics with the new A90 Supra. The H&R springs drop the ride height 1in up front and .75in for the rear to give you a perfect ride height with no rubbing or scraping issues. The lower stance drops the center of gravity and really helps the handling! The slightly stiffer spring rate also firms of the ride in the turns to reduce body roll a lot. The Supra comes with factory magnetic dampers so I couldn't see removing them for coilovers. These springs retain the factory drive modes and you can still enjoy comfort mode and sport mode as you did! I also love the 15mm H&R wheel spacers to pock out the factory wheels for a flush fit. Supra looks amazing with the springs and spacers and the increase handling capibilities and high speed feel is awesome! Installing lowering springs in the Supra isn't all too hard. You will need some basic tools like an impact gun, spring compressors and sockets. The front struts are very hard to get out of the knuckle so we just pushed the assembly down and disassembled the fronts on the car. The rear spring installation is very easy. Just loosen the lower shock bolt to mack the spring cradle slight back to the knuckle much easier. We did this in about 4 hours and this was so worth it! This is the best suspension upgrade for the Supra and I love the affordability of the H&R springs and how good the quality is! Loving my manual Supra even more! Fitment Industries was easy to order these from and has everything! In this video, we'll be discussing and installing the best suspension upgrade for the Toyota Supra - the H&R Sport Supra lowering springs! Toyota Supras are one of the most popular sports cars on the market, and for good reason - their performance is incredible. By upgrading your suspension, you'll be able to improve your handling and suspension performance in a variety of ways. And have a much better looking stance! So whether you're looking to improve your cornering ability, or just want to make your car look and handle better, the H&R lowering springs are the perfect upgrade for your Supra!
Check out Fitment Industries for all of your wheel, tire and suspension needs!!!
www.fitmentindustries.com/?am...
🤠 Check Out More Supra Aftermarket Parts!! brosfourrspeed.com
Springs: brosfourrspeed.com/parts-%26-...
Spacers: brosfourrspeed.com/parts-%26-...
Wheel Bolts: brosfourrspeed.com/parts-%26-...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Tools You'll Need
Spring Compressor
amzn.to/3JtWJ7W
Impact Wrench
amzn.to/3FK7m5w
1/2in Socket Set
amzn.to/40b6L4Y
Low Profile Floor Jack
amzn.to/3neF1hm
Jack Stands
amzn.to/3TIzUC7
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Installing The BEST Suspension Upgrade For The Toyota Supra!
Music By: www.epidemicsound.com
#toyotasupraloweringspring #2023supraspringinstall #supraspringinstallation

Пікірлер: 94

@amill1563 Жыл бұрын

Thanks for the referral to Fitment. Looks awesome! Personally I like brake kit upgrades to go with everything else, but that's me.

@BrosFOURRSpeed Жыл бұрын

Yeah Fitment Industries is awesome! Don’t know if I’ll upgrade the brakes on this car tho

@josephnaara Жыл бұрын

Very good video my friend 👍🏼 I just ordered the spring compressor. now tomorrow I will install them at my Garage bz already have the H&R Springs.Thanx God Bless

@BrosFOURRSpeed Жыл бұрын

Sweet! Very doable project for sure! You’ll love it!

@NissanAltimaGuy Жыл бұрын

Damn between the wheel spacers & this drop it’s lookin 🔥🔥🔥

@BrosFOURRSpeed Жыл бұрын

Thanks! Yeah it’s looking so clean!

@LTYFLY Жыл бұрын

Did H&R on mine as well and cad looks 🔥!!! There’s a few bolts you didn’t need to do but still yields the same results.

@BrosFOURRSpeed Жыл бұрын

Yeah not too bad of an install. Rides great!

@trd_ftw Жыл бұрын

I love the way it looks when its lowered, but man, I hate working with suspension, but this does not look too bad. But I think I will still get someone else to do it when it comes time.

@BrosFOURRSpeed Жыл бұрын

Yeah suspension isn’t my favorite either. More you do it tho, it gets better. But definitely a lot of work! Love the result for sure!

@AntLive29 Жыл бұрын

Looking good!

@BrosFOURRSpeed Жыл бұрын

Thanks!

@IDontTalkToCops 4 ай бұрын

Very helpful. Thanks.

@BrosFOURRSpeed 4 ай бұрын

Glad you enjoyed it!

@alabdel1388 Жыл бұрын

Man, I really like the black with this particular car. Saw this color in person the other day, it has a stealthy vibe to it that others don't have with this body style.

@BrosFOURRSpeed Жыл бұрын

For sure! It’s growing on me a lot! It’s got a grey undertone and some good metallic flake.

@anthonycurtiskeller Жыл бұрын

Best color option for the Supra, the black looks so mean

@BrosFOURRSpeed Жыл бұрын

@@anthonycurtiskeller it’s definitely a nice option!

@apexfien Жыл бұрын

Looks great 👍 Have to ask but is there any bouncing vs stock?

@Loganek9 Жыл бұрын

On march 3 I saw 5 supra that day I saw 2023 version 2021 version and also 2020: it was so cool ❤ and I love your car to ❤❤

@BrosFOURRSpeed Жыл бұрын

Very nice! I always get excited when I see one!

@Loganek9 Жыл бұрын

@@BrosFOURRSpeed same

@tmc8516 8 ай бұрын

I’m running these on my e92 with Koni shocks. Perfect for daily use 💪

@BrosFOURRSpeed 8 ай бұрын

Good choice!

@Aschoolbusandsimulatorfan2219 Жыл бұрын

This content is helpful to me again friend!

@BrosFOURRSpeed Жыл бұрын

Glad to hear it!

@RichW240 Жыл бұрын

When F.A.R. Performance changed the strut-cartridges in my 240Z back in the 70's, they angled out the struts the same way that you did on the front end of your Supra! Their M.O. was way more sketchy though! Remove the wheels and tires from the car. Lower the suspension on blocks of wood. Have someone push down on the strut tower while another person wound 3-4 lengths of house wiring around the coils to keep them compressed! No fancy spring compressors were around in the 70's!

@BrosFOURRSpeed 11 ай бұрын

Oh wow!

@paperboychris5390 Жыл бұрын

Looking good. Wheels are gonna set it off

@BrosFOURRSpeed Жыл бұрын

Thanks! Yeah that will be a cool next upgrade! They are being made right now ;)

@paperboychris5390 Жыл бұрын

@@BrosFOURRSpeed i knew it wouldn't be long. Looking forward to it

@BrosFOURRSpeed Жыл бұрын

@@paperboychris5390haha yeah! Love the 2023 wheels tho. So figured spacers would be good for now as I wait

@subnegro4946 Жыл бұрын

🔥🔥🔥🔥

@BrosFOURRSpeed Жыл бұрын

Thanks!

@PR.Garage Жыл бұрын

Does the kit come with bushings? I have Eibach lowering springs on it but I bought the car with them. So I don’t have stock bushings. Would I have a problem getting H&R springs installed?

@BrosFOURRSpeed 11 ай бұрын

There are no bushings that need replacing with this kit. Just swap the stock springs and your good!

@chrisginoc Жыл бұрын

How much do they usually settle after install? What's the average settling you have seen from your past experience?

@BrosFOURRSpeed Жыл бұрын

I’d say 1/4in. After about 2 hours it should settle nicely. Right when you put the car on the ground it’ll only lower about half what it should. Give it an house or two and it should be there

@jsavoni6478 Жыл бұрын

I want to get some springs... the install i feel would be awful😂 and im hesitant with garahes around here

@BrosFOURRSpeed Жыл бұрын

It's actually not that bad! Following the steps we did, knock it out in a few hours!

@danieloops Жыл бұрын

Hi! What is the dewalt tool that you are using called?

@BrosFOURRSpeed Жыл бұрын

amzn.to/3GDnyGh Here yah go!

@channelgreen5949 Жыл бұрын

May i ask why you didn’t go with swift springs or rsr? Thanks

@BrosFOURRSpeed Жыл бұрын

I've had H&R on all my cars. Good product and price

@taylormorales2795 Жыл бұрын

Do you plan on getting the car tuned? If so are the 2023 even tunable yet?

@BrosFOURRSpeed Жыл бұрын

They are tunable! Not sure when I’ll do that, but I’m planning too.

@postalpancho Жыл бұрын

Lowering springs are extremely an underrated mod because people rather have cheap untuned coilovers that ride and drive like shit. I can’t tell you how often I see people show up at the track or autocross with poorly tuned suspensions just to get smoked by people running OEM suspension. Lowering spring manufactures already did the R&D so you don’t completely ruin the suspension geometry and can have a streetable performance with little compromise. This is the best choice for most builds. This is one of the few times where less is more. Anything more than an inch is just asking for trouble.

@BrosFOURRSpeed Жыл бұрын

Very true! Especially on a car like this. Stock dampers are so good and have two modes. Springs just make it better with no hassle. Unless you’re a hard car track driving and you actually know how to adjust suspension for each different track you’re on and different conditions. Coils on a car like this aren’t really worth it

@V1perKiller Жыл бұрын

sorry for the noob question, is there any spring setup that's height adjustable without requiring the car to be lifted? Not asking for air suspension, something with a knob to turn manually and change the height. I'm not a fan of permanently lowering the Supra as it's pretty low as is.

@BrosFOURRSpeed Жыл бұрын

Technically yes. You can buy coilovers or adjustable lowering springs. You’ll have to take the wheel off, but you can adjust the right height manually for your desired height. Most cool over have a knob you can easily turn that will adjust the damping. But height takes a little more effort to adjust on coilovers

@Danbae69 Жыл бұрын

no go big or go home. dont ever cheap out on suspensions dude thats literally the part that keeps that hunk of metal afloat. hks or kw coilovers

@BrosFOURRSpeed Жыл бұрын

@@Danbae69 Keep in mind springs aren't cheating out. It depends on what you want your car to do. If you're not tracking a Supra, coilovers are a waste of money. The stock dampers are so good, better springs are all they need. Spending more money doesnt always mean better. That's just called wasting money

@bandosz3218 Жыл бұрын

Why haven't you invested in a quick-jack? Seems like it'd make a great video and make your life so much easier.

@BrosFOURRSpeed Жыл бұрын

Yeah at some point I’d like one of those!

@APTunning 11 ай бұрын

I'm installing mine H&R springs and for some reason when i put the spring back the lettering has to be upside otherwise it doesn't aling with the rubber top cover, if i put them like you installing them the lettering normal it doesnt fit the rubber cover. Any suggestions? Thanks

@BrosFOURRSpeed 11 ай бұрын

You should be able to twist the rubber on the top to line up

@APTunning 11 ай бұрын

I tried it don't fit it only fits perfectly when the lettering is upside down @@BrosFOURRSpeed

@BrosFOURRSpeed 11 ай бұрын

@@APTunning there’s gotta be something you can do tho. Not sure if you could run them upside down. Maybe. I’ve installed these twice tho and they worked the same. The top hat you can twist to line up the end of the spring with the rubber spot. Then once assembled you can twist it

@josephpizzi7505 Жыл бұрын

Does lowering the car affect the tss system ?

@BrosFOURRSpeed Жыл бұрын

Nope. Everything rides fine and has no issues. The suspension adapts to the lower height fine. That’s why springs are ideal for a Supra in my opinion

@jsavoni6478 2 ай бұрын

Any trq specs, or just tighten them?

@BrosFOURRSpeed 2 ай бұрын

Just tight. I've done springs on a ton of cars. Nice and tight is about all you need. I'd assume anything over 50 pounds is good. But you can look up torque specs to make sure. But it's not hard to do even 70 pounds by hand

@jacobbonilla 7 ай бұрын

I installed these but i keep getting a bit of vibration/rattling? Did you ever experience anything like that after the install?

@BrosFOURRSpeed 7 ай бұрын

In the first week or so I'd hear a click on big bumps. But that went away. Make sure everything was installed exactly like stock. Need to have the rubber things the springs sit on aligned correctly. Also will want an alignment.

@REALRAWTALK 7 ай бұрын

@@BrosFOURRSpeed Gotcha, I also installed H&R Spacers & it sounds like it may be coming from that.. Getting an alignment today so fingers crossed it gets fixed

@BrokenAdam2024 Жыл бұрын

There is one demerit for installing coilovers: you can scrape and damage your car to the ground while going on bad roads. My family has a 2012 Kia Rio Hatchback with coilovers installed by the previous owner, so I can torture the car on damaged roads with my fat body!

@BrosFOURRSpeed Жыл бұрын

Yeah for this car springs are good since you retain factory settings and it’s not too low

@BrokenAdam2024 Жыл бұрын

@@BrosFOURRSpeed What if it's too low? You can scrape it on bad roads!

@BrosFOURRSpeed Жыл бұрын

@@BrokenAdam2024 Just gotta be careful!

@rjc_ctsvwagon Жыл бұрын

Did you get an alignment after?

@BrosFOURRSpeed Жыл бұрын

Yup! Wasnt really all too off tho

@R0cket_Rabbit Жыл бұрын

Any plans for camber arms?

@BrosFOURRSpeed Жыл бұрын

Don’t need them for this setup 😎

@R0cket_Rabbit Жыл бұрын

@@BrosFOURRSpeed That's awesome! How about fender rolling? Are you rubbing now that you're lower and sitting wider?

@BrosFOURRSpeed Жыл бұрын

@@R0cket_Rabbit No need for that either! No rubbing at all and I can run wider tires and still not rub. Great setup for sure!

@channelgreen5949 11 ай бұрын

Help please. I now have H&R installed and TE37 wheels. And had my car aligned twice already. Cause my car seems to pull to the right. Now on my 3rd alignment…the shop told me drive it again and see if it’s still pulling to the right. If it does we’re gonna have to take suspension out. What is goin on. Help please

@BrosFOURRSpeed 11 ай бұрын

Put your stock wheels back on and test the car with a proper alignment. Then see if your wheels are the issue. But I've had these on both my Supras and they ride like stock. Has to be a wheel/tire or alignment issue. Are all the shocks back in the right place?

@channelgreen5949 11 ай бұрын

@@BrosFOURRSpeed but before the springs the car was running perfect with the wheels and tires....it started pulling right when springs installed...

@BrosFOURRSpeed 11 ай бұрын

@@channelgreen5949 Then something isn’t installed correctly. Are all the springs completely seated in their spots evenly? Are the front struts completely back in the knuckle?

@BrosFOURRSpeed 11 ай бұрын

@@channelgreen5949 kzfaq.info/get/bejne/atyGn8WWqtG6lmw.html Could it be this too?

@nerowolf8006 Жыл бұрын

Correct me if I’m wrong but the Supra doesnt have a magnetic suspension. BMW as a company uses adaptive suspensions but nothing like Ford, Chevy or Ferrari’s magneride

@BrosFOURRSpeed Жыл бұрын

Not really too sure if it's technically magnetic or not. But the two setting remain usable with the new springs. It's an adaptive suspension with two modes for the damping