Installing the euro cubby storage tray into a Volkswagen EOS VR6
Рет қаралды 345
Жыл бұрынUS versions of the EOS (and other VW's) did not receive this storage tray due to NHTSA crash regulations, so if you want one of these, you will need to source one from Canada or Europe. This one came from Ontario Canada and it was a perfect fit. Some removal of inner bracing is required and is covered in this video.
Purchased from Next Gen Volkswagen Dismantlers
www.ebay.com/str/nextgenvolks...
@kensmith8832 Жыл бұрын
Submarining occurs when a tiny woman don't wear the seat belt correctly. Their 90 LBS can fit into that area. We should force them to wear a 7 point seat belt harness with pads and fur.
@landroverSV 3 ай бұрын
I see you installed a MK5 R32 steering and wheel and shifter I believe , any other R32 parts? The R32 pedals fit and also the break calipers. A performance intake from a Passat will fit too. Any performance parts you may do?
@2phast 3 ай бұрын
Actually its a GTI steering wheel. I did install a matching foot rest and modified the factory air intake by removing the diverter valve, sealing up the hole and also sealing up the openings in the air scoop, so its a true cold air intake, only drawing air from the outside, not the engine bay. Also a K&N panel filter. Was unable to locate Mk5 R32 brake parts, but I did source some 2012 Golf R brakes, which are basically the same as the R32's, just black. Still need a few parts for the front, have everything for the rears. What is the story with the Passat intake?
BalcevMMA_BOXING
Рет қаралды 4,4 МЛН
ISSEI / いっせい
Рет қаралды 75 МЛН
BARN FIND Monte Carlo SS Parked 20 Years! Will It RUN AND DRIVE? | Satisfying Detailing Restoration!
WD Detailing
Рет қаралды 397 М.
David Bombal
Рет қаралды 454 М.
jamoloniy
Рет қаралды 1,6 МЛН