Пікірлер
@MatthewJeffery-je2jw Күн бұрын
I have a Wilson combat build on layaway with a 13.5 barrel it’s got this pin and welded to the end of it. I thought it looked really cool. It’s also got a PA 1-6 lpvo on it. Do you think the flash would affect accuracy on the scope? Like will it kinda blind the shots? Hopefully this isn’t a stupid question I’m kinda a newbie Bro
@2phast Күн бұрын
The Dynacomp is basically a linier compensator, pushing all the gasses out through the front. Depending upon the length of barrel, you might have a large fireball out the end. I have used this on a 7.5 and a 10.5 and with 5.56, you get a good sized fireball out the end. You might be ok with the 13.5". You will have less unburnt powder if you run .223, which is what I prefer in my 7.5" SBR. You need to try the Dynacomp with the end cap and with the option compensator end cap, see which works best for you.
@MatthewJeffery-je2jw 21 сағат бұрын
Thanks Bro
@nikossicks6929 3 күн бұрын
Very helpful video I just got a replacement boot for my wife's Tiguan. But after your video I deside to go with a cheap fake leather with red stitching. I already have a cheap leather steering wheel cover with red stitching that I have put by myself
@jyotimagic 9 күн бұрын
I did it! I only dropped the screw inside once (before I super-glued it to the bit). Easily got it out with my magnetized bit. Just took a bit of patience. It was helpful to know which way the latch fitted in, and which Torx bit to buy.
@edneumann2962 9 күн бұрын
This was, by far, the best presentation of this project. Video was clear and instructions comprehensive.
@user-po9hy9th7w 10 күн бұрын
... I've got a cheap Chinese made riser from Amazon that fits the trs-25 with a small wing nut instead of a big nut ... no wrench needed
@rogue5643 21 күн бұрын
Better idea, move the hell out of your communist state
@sheikhmkrifat7749 29 күн бұрын
How is this cable compare to Tripowin c8 cable with mic?
@burtwhite991 Ай бұрын
Mine were broken and came in a cardboard box. The rear sight wouldn't stay flipped down, then the button wouldn't even press.
@jpk502 Ай бұрын
What color red/orange did you use?
@KevinWood44 Ай бұрын
How bad is YT???....I searched *"Jpfc-hs ar 15 hammer stop block"* and nothing came up. I had to run that search through google to eventually find this video.
@jkidding386 Ай бұрын
Hi, where do you think i can find one similar like this? my vw eos uses the round bracket as well and I am looking to replace it with the auto dimming function. I don't need the homelink.. just the auto dimming function and bracket..
@2phast Ай бұрын
The OEM Volkswagen auto dimming mirror uses a different bracket and the window mounting plate is different as well. You would either need to replace the mounting plate or use a different mirror that is compatible with your mounting plate. An easier solution would be to get an aftermarket mirror with a compatible bracket, like this one. www.aliexpress.us/item/3256806401322762.html?spm=a2g0o.productlist.main.11.7954JG5EJG5Edl&algo_pvid=a51604fa-bff9-41a1-a9b9-47c4882265e2&algo_exp_id=a51604fa-bff9-41a1-a9b9-47c4882265e2-5&pdp_npi=4%40dis%21USD%2159.73%2156.73%21%21%21431.59%21409.91%21%40210313e917169995733838463ebf33%2112000037738719839%21sea%21US%21122229826%21AC&curPageLogUid=8UU48vmWc3Lh&utparam-url=scene%3Asearch%7Cquery_from%3A
@jkidding386 Ай бұрын
@@2phast thank you!
@OneofMyTurns Ай бұрын
With the bolt and firing pin removed it’s no longer a BCG it’s just a BC.
@o.collinsconcept Ай бұрын
Thank you the most detailed out here
@davidikbri2361 Ай бұрын
Muy bien explicado,gracias👍
@Acmount_global Ай бұрын
Wow, cool video!! thank you for the sharing!! It is our pleasure to gain your recognition of the ACMOUNT! ❤ Feel free to let us know if you need any support in the future. Here is always for you!❤
@MsLampalampa Ай бұрын
Hate that cup holder it’s absolute garbage. You can only use the front one. Move the thing forward to hold it and anything you but on the back holder doesn’t hold.
@TheRandomDead Ай бұрын
I wish magpul would’ve made a mlok version of the afg2. I personally hate the current official mlok version they have. It is way too small and does not give a firm positive grip, you almost need your hold onto the hand guard too otherwise it feels like your gun will fall out of your hands. I just ordered the afg2 with the rail - mlok adapter in FDE. should fit my hands a lot better.
@toledoupsguy6064 Ай бұрын
I agree 100%. I had afg2s on my quad rail MRPs and really liked them. Switched to mlok and got the mlok adapter for them. Still liked them but for some really stupid reason sold them and tried some actual mlok products. May be buying afg2s and adapters again. Don't like the mlok afg at all, too small.
@kylejohnson1308 Ай бұрын
Didn't you say it was adjustable for elevation? I don't remember you showing how to adjust the elevation? You did the windage tho. Or did I just miss that part ?
@Ser-px7ih Ай бұрын
Я чому хтось рішив що він спортивний?
@robaustin9557 2 ай бұрын
This Gimbal is junk, try holding the thing for any amount of time, it is all weight forward, your grip will be tested after 45 min. Also, the Gimbal lacks any type of power. Additionally, the Bluetooth is intermittent at best. Regarding the Bluetooth, maybe I received a bad from stock unit? I have no issues with other Bluetooth systems if my phone were to be suspect. The tracking is poor especially when shooting 1080P. As for me, I’ll find another unit that works. On another topic, I’m not sure if the videographer was just nervous or I’m used to a different level of review, but random, not sure of what was being said, I learned nothing more than the poorly written manual provided. This is in no way attempting to be rude or disrespectful. I’m providing feedback so maybe he can do better next time.
@prtymusic 2 ай бұрын
Hi, Great video, i am trying to retrofit a bmw 2019 mirror into my 2010 but hooking it up to my existing LIN bus wire doesn’t seem to work. Any insight or suggestions on this? Thanks!!
@2phast Ай бұрын
I don't know enough about LINBus to really help, but the problem may be in the different versions of LINBus that were used. Given your 2010 had LINBus already, it should be LINBus 2.2a, But maybe your car has 2.1, hard to say and hard to say how to determine the version. I suspect though, the mirror your trying to use is just too new and there are communication issues. You might want to consider getting a mirror from a 2010-2012 model. 2010: LIN 2.2A released, now widely implemented versions 2010-12: SAE standardized LIN as SAE J2602, based on LIN 2.0 2016: CAN in Automation standardized LIN (ISO 17987:2016)
@prtymusic Ай бұрын
@@2phast thank you! I’ll look into a non Lin bus mirror instead
@weswarden2216 2 ай бұрын
Its so much easier to jus push down on the back of the lever to get it on the buffer tube instead of tryin to pull down from the front or middle of the lever... idk how people dont realize this
@aquaticlives2948 2 ай бұрын
Hello, did you say i need a 7mm L key to install? It doesnt come in the box?
@ericacroskey5009 2 ай бұрын
My daughter has the 2009 VW EOS she got the factory radio switched to a pioneer. And new speakers. Now the battery keep draining. The guy who done it saying that alternator is going bad... But we had no issues before then. Is this common
@2phast Ай бұрын
Yes its a common problem. These radios are sold with a canbus simulator and units like the Pioneer can use ones like the Idatalink Maestro (thats what I use) to prevent these types of problems.
@landroverSV 2 ай бұрын
Would a MK5 R32 steering wheel fit? I think it should...
@2phast Ай бұрын
Yes, its basically the same as the GTI wheel.
@smultack 2 ай бұрын
I unscrewed the back and dropped some tinfoil in battery compartment. It works without the backing if foil in place. Drop cart into barrel and it fits flush.
@iamgeorge1146 2 ай бұрын
I love the ideea and geat work! But such a shame you did not used a a proper backup camera. That really brings the whole presentation down.
@2phast Ай бұрын
I actually use one now for testing, but due to the low resolution of these screens, it really does not make any difference.
@cameroncollins4423 2 ай бұрын
nah bro door stays on the right. acess to the door is easier when you are using sling as a right handed person
@ad147 2 ай бұрын
What are the little clips/torx screws actually called in order to buy new ones?
@ad147 2 ай бұрын
I bought a T20 torx (really a set of torx) and the T20 doesn’t even fit in the hole at all. I tried a smaller torx and it doesnt unscrew at all.
@Anonym-gg1gt 2 ай бұрын
Nice review. Thanx for your effort and insigth.
@godsdozer 2 ай бұрын
Just installed the newer version of this on my colt 6940. It was so tight I had to use a rubber mallet. Couldn't believe yours just slid on and off like that.
@kungfupandas1 2 ай бұрын
Do these eliminate the “twang”?
@yellowjoe.2000 3 ай бұрын
this is beautiful
@MegaBait1616 3 ай бұрын
Like Hougue the best .....
@ahmadnatour5221 3 ай бұрын
I have an eos 2007 with no shifters and no buttons , thinking of buying the same gti steering wheel , can i keep the gti buttons and expect them to work on my eos that have no buttons ? Or i wont have wires for them in the first place . Please respond
@2phast Ай бұрын
This would be a better question to post on a VW specific forum as this has been done on MK5 GTI's/GOLF's. Since I have not done it, I can't give you all the specifics, but it might require a new clock spring or convivence module and VCDS programming
@landroverSV 3 ай бұрын
I see you installed a MK5 R32 steering and wheel and shifter I believe , any other R32 parts? The R32 pedals fit and also the break calipers. A performance intake from a Passat will fit too. Any performance parts you may do?
@2phast 3 ай бұрын
Actually its a GTI steering wheel. I did install a matching foot rest and modified the factory air intake by removing the diverter valve, sealing up the hole and also sealing up the openings in the air scoop, so its a true cold air intake, only drawing air from the outside, not the engine bay. Also a K&N panel filter. Was unable to locate Mk5 R32 brake parts, but I did source some 2012 Golf R brakes, which are basically the same as the R32's, just black. Still need a few parts for the front, have everything for the rears. What is the story with the Passat intake?
@jacksonmarshallkramer5087 3 ай бұрын
Better be a short bayonet.
@jacksonmarshallkramer5087 3 ай бұрын
Has the FN chf chrome lined barrel.
@jacksonmarshallkramer5087 3 ай бұрын
Needs a quadrail.
@xxdizannyxx 3 ай бұрын
You get what you pay for. My BCM Recce 16 and DDM4V7 LW have ZERO wobble. My sig m400 tread has wobble.
@kizitodegreat 3 ай бұрын
Please boss I need to ask a question before purchasing this Pro charger. i have eneloop pro NiMH rechargeable batteries comprising AA with 2500mah and AAA with 950mah. Now according to the user manual of the Energizer Pro charger, the battery capacity for AA batteries is between 1300 - 2300mAh and AAA is between 500 - 800mAh. So my question is, will this Pro charger work with my batteries which obviously have higher mAh capacity than what is specified in the manual? Can you test yours with any of my above batteries and give me feedback if it works or not? this will be greatly appreciated. Thanks a lot
@2phast 3 ай бұрын
I use this charger with Amazon Basics 2400mah AA batteries and it works fine, no issues with charging. Can't comment on the AAA's as I don't have any.
@kizitodegreat 3 ай бұрын
@@2phast Thanks so much for your quick response. I really appreciate it
@klebanjanusz280 3 ай бұрын
Nice rig but Would be nice to have a Bluetooth shutter on the handles
@2phast Ай бұрын
Yes I agree
@Urbex_Explorations_PT 3 ай бұрын
How you use plates on vest
@2phast Ай бұрын
It's not really designed to hold plates, although there are pockets on the inside
@rayburn2007 3 ай бұрын
Spikes tactical is far superior
@rayburn2007 3 ай бұрын
Spring is stainless steel
@jeremyc3911 3 ай бұрын
The shorter screws mounted my Streamlight HLX light (long screws do not fit into the flashlight threaded holes). Long screws are used to mount the offset to the handguard.
@fmurrey4372 3 ай бұрын
If it only lasts for "750" rounds then it doesn't last very long at all.
@forgottenknowledge8917 3 ай бұрын
6:04 that's what I said
@StrangePinkDust 4 ай бұрын
It is crazy that after 10 years, this video helped me more than you can believe.