Pleasure to sponsor your content! Great to hear Tradify is improving your business admin and keeping you organised.

Jordan must be sooo jealous now 😅

Terrific video Cory,really interesting,great work from you both pro install,Jordon is probably crying 😢,while Lee and John are laughing.Look forward to your next vid mate.

Top quality video Cory 🤟

Very impressive, to say it's the first one you've ever installed you didn't stress you done a great job. 👌

This is a great video Cory 👌🏻👌🏻👌🏻 really enjoyed watching through this one.

Great video as always Cory so neat and tidy 😎👏🇮🇪

Gorgeous looking battery arrangement 👌 looks like they've nailed their ecosystem now! Just needs an EV charger V2 which doesn't look like a toilet seat 😂

Such a wise young man, sick video corey!

I installed my Solis inverter and PureDrive battery on the outside of my house for that very reason. It did struggle during the cold snap we had in December, so I modified a small garden toolshed to fit over them to keep the worst of the weather off and been fine since :)

Really love how every video is a first and u share it with us keep up the good work

I've fitted the Rayleigh components 10kw battery and inverter and apart from the casing colour and branding almost identical... feel ya pain learning on the job!! Great install mate

As the home owner was happy for you to drill holes into their brickwork, you might consider adding a couple of M10 DeWalt Snake anchors into the wall to allow you fix your ladder safely. I've got them all the way around my own home, and use them with a couple of Petzl Coeur hangers, bolts and a ratchet strap.

Not a bad looking system TBH, nice install too, and you lot had way to much fun with the new toy, oh I mean nail gun. love the mix of work and humour. keep up to great content mate. :)

Well buddy another top video as all ways very pleased for you Cory all of your work is of the highest quality. Woody

I got to use the Hilti BX3 fastening tool while doing my electricians job training, bit bulky to handle on a ladder, shooting into the ceiling, but got to admit brackets for cable runs above the dropped ceiling done were done in no time at all! And you feel like Robocop doing it!

You can get an addition to the ladder that is a wider bar at the base with rubber feets. It makes it so much more stable and safer. Here in Sweden roof workers like chimney swipers aren't even going to go up if you don't have that type of adition to your ladder.

this system makes me so excited to move from CA back to Ireland, yes there is things we do better but your Solar PV systems are unreal!

Awesome stuff Cory! Nice to see the use of LiFePo4 batteries. Well done on being first to install! Cheers

Wicked job Cory on your first Install of the My Energi Libby and l really like SPIT GUN a Game changer From plug-in and screwing & it would be Great if Milwaukee would Bring one out smaller Version ⚡️👊

That was awesome mate ❤

I watched the full video to see how you sealed the hole in the wall for the cable from solar - just to find out that was not shown :D Nice work, btw, I would be proud of myself if I was able to do something like this.

Great video! That nail gun is tempting like 😊

Another great video corey 👏 👌🏼

Great vlog You're about the only electrical KZfaq I watch now.

Awsome video Cory , i found so interesting and funny great editing thanks .

That was really informative and entertaining too. Thanks😊

Agree just installed battery storage under a stair weren't happy about it . Company didn't make client aware

Excellent intro to the product. Seems a little more convoluted than SE to fit, but nice that it all runs off one app and the customer can tune the battery behaviour. Bit longer than normal, but lots of wisdom in it. Recommend you keep the nail gun in a locked case to stop the little ones playing with it.

MyEnergi have a killer product here. Their biggest strength is the full on integrated ecosystem where every equipment talks seamlessly and it is easy to add new equipments without difficult configuration steps or problems. I really like the route this company is going and how they take every step carefully instead of announcing a lot of products in their ecosystem at once. They have the Zappi and the Eddi, what they are know for, after it turned into a grown, reliable and trustworthy product they announced and released the Libbi. They have all the conditions, with this current heading, to be a very powerful world wide player in a long term.

That was fun, even if you didn’t hide the difficult bits - like being knackered at the end of the day - and, whilst I already have progressively installed solar, Powerwall v2 and an EV along with a standard 7kW wall charger + Octopus Go (not all at once), all of which has saved me a boat load of cash over the passed 5 years, I’m still a bit jealous of MyEnergie suite of prods. Great video and good job. It does look like MyEnergie has nailed their products from the word go.

Excellent from start to finish. Looking forward to the episode.. my new Eastenders haha

Awesome video dude 😎

nice video as always!

Hope there's a heater or insulation in those battery packs, because LiFePO4 battery capacity and charge/discharge rate goes to shit below 10c. Most won't even charge when they get to around 5c.

Interesting looking home

Great video mate top notch 👏😎

Massive day for you, Cory - can't see that you would have left there until maybe 10pm (nearly 9pm when showing the app at the end)...and then the drive home. Stay safe!

Why not use a double pole MCB and 16mm tri rated cable to link load side of main switch to the MCB ? Love your videos.

Totally agree on the battery safety aspect Cory! Great reference to look on when we do our first one. Thanks for sharing!

I got some of the ArcBoxes, they make perfect sense to fit. I struggled to get some but the guys from Viridian in the Netherlands help me out

Just love my energi products superb

Great video! Nice to see it installed! What nails did you use in the spit gun for the conduit clips? 22/27/32mm?

Another great vid! Wheres the next road trip going to be?? I hear there is a new car on the radar 😉

Good stuff. I feel batteries should be made safe enough to store in the home, but should still be kept in a weather proof and fire resistant container next to the house. Can put some extra solar panels on the storage structure.

Hello Cory conjugate on getting married I hope you and you wife are happy and you did a very good job love you work keep it up

Nice Product Cory, Nice install!

@43:35 why not pop up the wholesalers and get a Hager neutral busbar with flexi tail kit? Plenty of room to clip it in with the other neutral bars and the added benefit of the RCD neutrals being able to be mounted to it too.

I was thinking about all those electrics outside & it getting wet & mucky from bird droppings, I think a cover or shelf would help here! Plus to help keep the battery temp better particularly in winter!

Oh Wow . Cory ,your in Dorset !! Welcome . Just watch out if you go to Wareham as because of interbreeding they have 11 fingers . rgds Don

Smooth job Cory, but those batteries being outside might have problems in the Winter, as they, like us humans, do not like getting cold. Does the Libbi system cover this with thermal heating? Otherwise great job looks very professional and I love the way all the MyEnergi units start working together the moment they are plugged in and switched on.

Nice one😍

Hey cory great vid out of curiosity how did you sort the neutral bar issue i am assuming you used a small bus bar link for the live but wasnt sure on the neutral 🤔 video was worth the wait 👍

Nice install. Please don't worry about fire/explosion or such things with LFP batteries. They are save. Many YT channels did these tests, as also the manufacturer states this. The only thing to worry about are fumes when a battery cell is punctured or overheated. The BMS will take care off overheating, but I agree with you: better save then sorry. Some thoughts: The plan putting them outside, is in my opinion not the best. They just perform the best in a normal house climate. Absolute minimums: Charging >0 C Discharging > -20 C But better between 10 and 20. Manufacturers like the Tesla Wall do have heating/coolant, like in their cars. But, that brand (for building quality) is a Rolls Royce, other brands have to prove themselves, if they even thought about it, other then putting a simple peltier element or only a heatplate in the box. So, temperature is a huge 'thing', also the power it consumes.

27:31 😂😂😂😂😂😂 You crack me up matey :)

Just installed one! Sweeping the board on inverters

Hey love your videos. Keep them up. Quick question. Do milwaukee do a stud/ cable finder. Or what one you use or recommend? Thanks. Mayo for Sam

one thing i would say i get propper workers boot covers, you can easily remove as they are fabric.....reason being you left your temp ones on and basically treaded fiberglass into there carpets... but great content, this isn't a troll just a heads up. That TRANSPORTER will soon come 🚙

For my understanding LFP batteries are very sensitive about the cold and would refuse to charge in befeinde degrees Celsius. How is the Levi managing that in regards to the installation outside? Nice video, keep them coming 😊👌⚡️

Nice 1 Cory, good video. where is the zappi?? The Spit gun (sounds dodgy 😂) is a great piece of kit, gonna.get me one of those!! What hoover do you have?

For the average domestic customer I'm sure the libbi will find a market (albeit its going to be huge over the next few years!), but lets be honest Victron Energy are already way way ahead, at a similar price point, but you get a much more resilient profesional marine / industrial base product, with worldwide community support in the unlikely event that you need it.

if AC coupled, assume you can use a Harvi for convenient wireless CT?

Ya gotta love the fact you're not supposed to run data/LV in the same trunking/conduit as high voltage live cables.....yet it's fine to have it actually inside the same cable as with an EV ultra.

Great video as always Cory. But being honest, the libbi seems really overpriced when you compare it to the new GivEnergy all in one. This 10kwh +3.6kw inverter for 7270 + vat where the all in one is 13.5kwh +6kw inverter for 5995+vat. The GivEnergy also comes with gateway to automatically take you off grid in the event of a powercut.

9:48 Yes you do, we have 260 work days this year out if you most likely will be sick for 8 and must have 28 days of pay hoholidayso you will be working 224 days trying to make your sally lets say £75K gross that 334 to earn a day + 20% on top as overheads and profit (then you must run your busines very conservatively) it's £400 dayily charg to a clinet. And if you make a mistake and you will do some boo boo well it cuts in to your profit.... the best case scenario you have tons of work and 10+ employees so tehn you can bank all the profit they earn for you. And trust me it wont be taht much anyway.... hahaha

Not bad not bad if I do say so myself! Any chance of a cost breakdown on what the kit would cost and the labour?

Hahaha theres a Fisher man's joke about seagull: pluck and cook for 6 hours then bin it and cook chicken instead. Apparently they taste like seaweed and mud and the meat so tough that cant even be cut with a grinder.

Hey Cory what are the overalls your wearing?. also nice job as always you take real pride in your work.

Steel Blue are nice boots but Oliver boots are the go!

@17:44 i feel compelled to mention, that u had that six-pack-plan in that green gym in germany... ur upper arms look soopa powerful already...

Hi Cory! What is the maximum power per string Libbi will take? I have 12 500 w panels on one array & 6 500 w on another array? Will the 5kw Libbi work for me? Rgds mg.

Cory well done great content your milwaukee multimeter which one is it im liking that 👍👍👍👍👍👍👍👍👍👍👍👍👍

where do you stand on battery placement? inside? outside? in the garage? how risilient are they? will they last the lifetime of the rest of the system if they are left outside like my tumble drier? thanks ps, you mentioned the day rate, but there's no guarantee of the quality of the work so...

LiFePO4, is just called Lithium Iron Phosphate, the O4 is part of the phosphate, the 4 doesn't need to be said, silent almost if you wish.

Hey I’m just curious, isn’t rain/water an issue with the battery being so close to the ground. What happens if water pools up at the batteries?

Battery a Bit low for snowmelt or localized heavy rainfall?

Instead of SDS try a core drill with a 300mm long core bit. Less chance of a breakout when drilling from inside.

24:09 on your way to a hernia mate. 😂 great video Cory. What’s your thoughts on Growatt combined inverter, charge controller?

🤣40:01 OLIVER got his PRIORITIES right! 🤣

id be interested to hear what effect a British winter will make on battery capacity

Great video. I have a Zappa and would have loved a Libbi. I just can’t stomach the price premium. 10kw Libbi with 5kw inverter is 2-3k more than the 17kw solax triple with 5kw inverter.

Inverter’s a little lighter than those 15k Quattro’s! 😂 I want one of those nail guns!

I'm having a mindful moment, open both doors instead of tilting. 😂

Hi Cory, re having batteries outside, we are narrowboat owners and when considering placement of LiFePO4 batteries on a boat it’s stated that they have to be inside the boat and not in the colder engine bay. Not supposed to charge them at less than zero degrees. So……. How come they can be outside? Or even (as ours) in a garage by the doors. Thanks .

@Corymac and chance of doing a video about TT earthing and if there are any benefits to getting a really low earth on a TT, the problem in different soil type, problem with seasons and earth and different products used for earth and please reference Timmy 😂

This is the future

Could I ask why you needed a supply that wasn't RCD protected, as I am unfamiliar with Givenergy products? Thanks

How would you compare it to GivEnergy battery and customer service?

Does anyone know where Cory got them workwear trousers/DUNGAREES. They look like a good purchase. thanks

Moving into a new house and looking at the myeneryi system the house currently has a Mixenergy water tank and solar. Do you know if you can add the Myenergi car charger and batterys while still keeping the futures of the mixergy water tank ? or would you have to add in the Harvi and loose the futures of the current water tank ?

Question, do people need solar or could we just get a battery pack and use Octopus Energy to charge it with off peak and spend its charge during on peak ?? Obviously depending on usage, but if the usage is say below 10kwh a day.

IP rated and the inverter is in the unit? Sold, I'll take 4. As long as I can control it with something sensible home automation wise - if it's a dumb brick that requires a phone app they can keep it :) No srsly though it's so obviously what is needed it's kinda mind boggling that it's taken so long to get something like that on the market. Those of us who don't have a garage and our CU is in a downstairs toilet need the battery outside, and really we need the inverter outside too AND we need it not to look like a bowl of spaghetti.

Nice system however, but much like every other system barring the Tesla Powerwall - it doesn't have an ATS gateway (automatic transfer switch)....so you can't have backup power for the whole house.

Just a pity for a 20kw set-up you need the 4 batteries + the inverter, instead of a couple of 10kw batteries like the Tesla powerwall,hopefully once established they'll bring out a single larger battery 🙏 Integration though with the other myenergi products is it's USP 👌

The external mounting of the batteries . The legs of the bottom battery are sitting on what looks like tarmac drive. If all the weight is on them the legs will slowly sink. Also consideration of location against flash flooding. If there is a risk, perhaps locating higher from ground or elsewhere.. Great video loved it.

Costumer lets you shoot nail gun in garden and brings you cookies and pizza, but you are afraid to ask for something to use as dust sheet ;-)

Pro job

A 'man' might be ashamed at reading a manual, but an engineer is never ashamed to do so.

I can’t see past The fact brick work on that house has been done by stevie wonder , absolutely horrendous

I tried to buy a Libbi to install myself, and Myenergi refused saying it must be installed by a professional, having installed the Zappi, Eddi and solar panels myself I think the libbi looks pretty straightforward too. Not sure why they won’t sell it to private owners. Thanks for the video 🙂👌