Installing upper crash bars | No Talking | Triumph Tiger 900 Rally pro | Modification series

Installing upper crash bars | No Talking | Triumph Tiger 900 Rally pro | Modification series | Ep 3

Рет қаралды 6,043

Жыл бұрын

Watch me as I install Upper crash bars onto my Triumph Tiger 900 Rally pro. There's no talking, just workshop sounds.
Part Numbers:
A9780051 (Crash bars) & A9830210 (Fog light brackets)
www.bike-parts-triumph.com/tr...
The Tools used to make this content:
Main Camera - Sony a7iii
External mic - Rode Video micro
Bike - Triumph Tiger 900 Rally pro
Editing software - Davinci Resolve Studio
Log footage conversion LUT - Leeming LUT (Sony HLG 3 to Rec709)
If you like the channel and my content, you can support my next adventure content by buying me a coffee for the road, here:
www.paypal.com/donate/?busine...
You may also like content from some of my favourite channels:
Brake Magazine: / brakemagazine
Bike World: / bikeworldcouktv
Adventure Country Tracks: / @actev
AndyManCam: / andymancam
Backcountry Adventure Motorsports: / backcountryadventuremo...
Itchy boots: / itchyboots
North and Left a Bit: / @northandleftabit
Pol Tarrés: / @poltarres13
RichyVida: / vidamusiccouk
Thanks for watching.

Пікірлер: 28

@thiagogabriel539 Жыл бұрын

Its looking good.

@advdan Жыл бұрын

Thanks! I absolutely love this bike!

@INNOVVDashCam Жыл бұрын

Love your videos 😀

@ivan.exposito Жыл бұрын

Yeah, just discovered your brand because this video!

@advdan 10 ай бұрын

Thank you so much!

@toddbuhmiller 13 күн бұрын

Thanks for making this video. Is that a camera under the headlight?

@Revzinator 6 ай бұрын

Magic hook!?! 😃

@RustyRecovery Жыл бұрын

Good video. Are they Triumph bars ?

@advdan Жыл бұрын

They sure are 👌🏼 Fit straight to existing lower bars too

@SergeyVikultsev Жыл бұрын

What torque did you use or engine head bolts?

@advdan Жыл бұрын

I didn’t 🙃 can feel when they are tight enough. I will check them every few thousand kilometres

@chriswharrier3571 Жыл бұрын

I had my bars fitted by the dealer when I bought the bike. On my bars, the rivnuts that hold the spots seem to have worked loose. What other upgrades do you have in mind.

@advdan Жыл бұрын

To be honest, those rivnuts aren’t great. They protude out so that the fog light bracket doesn’t seat onto the tubing, which means they don’t tighten up properly. Poorly designed IMO. I’ve just installed some Karoo 4 tyres and I’ve got Denali Sound bomb, Pannier racks, Smaller wind shield, bark buster hand guards, New exhaust and repainting the rusty quick shifter in mind for now. 😎

@chriswharrier3571 Жыл бұрын

@@advdan that should keep you busy, I've already done the barkbusters and swapped the mirrors for double takes, I have history when it comes to dropping bikes.

@dirkbrunemann3807 Жыл бұрын

@@advdan Which exhaust did you choose, Dan ? I recently mounted my new Mivv Speed Edge, nice and deep. Arrows are unfortunately not available in Germany

@dirkbrunemann3807 Жыл бұрын

@@chriswharrier3571 I had Burkbusters on my previous Explorer, excellent stuff, now chosen the H&B Solution that is made out of steel and very rigid, protecting the original handguards and also the bar.

@advdan Жыл бұрын

@@chriswharrier3571 oh yeah! I’d like a set of double take mirrors too!

@crossfitchunk Жыл бұрын

Hey Dan, nice video Shame about the helmet 😕 What jacket have you got on? And which dash cam is that?

@advdan Жыл бұрын

Yeah I’m bummed about that 😭 So the jacket is a Rev’it Horizon 2, I got it on eBay, 2nd hand for cheap! And the cams are Innovv K3’s 🤙🏼

@crossfitchunk Жыл бұрын

@@advdan cheers Dan, happy riding mate 👍

@crossfitchunk Жыл бұрын

@@advdan I'm still plucking up the courage to buy the 900 🤣 or 1200 I'm still not sure, I'm the worst for buying stuff, I always over research before bitting the bullet

@dr.jayburness6522 Жыл бұрын

Which dashcam is that? Thanks.

@advdan Жыл бұрын

Hi, it’s the Innovv K3 dash cam. I installed it in my previous video ✌🏼

@Ironhawx Ай бұрын

How heavy are these bars? Do they affect handling?

@advdan Ай бұрын

I can’t remember exactly how much they weigh but off the top of my head, only about a bag of sugar each side. And I don’t think it will affect the handling as it’s an equal weight each side of the bike. Might affect the aerodynamics if you’re a racing kinda guy though 🧐

@nitroxido Жыл бұрын

hey man. how are you doing? I did this 2 months ago in my white T9 here in Brazil. The only difference i notice that was I put on a type of screw glue (medium fixation) ... nice video! take care! (oh i just put on this type of glue to avoid some problem with the natural motocycle vibration )