No video
Intellitronix Ford Digital Dash Assembly
Рет қаралды 11,866
Күн бұрынAssembling my new digital dash panel from Intellitronx
@Nestorgard 3 ай бұрын
Dónde puedo conseguir de una f150 82?
@BoundANDDetermined88 10 ай бұрын
Great job on the update and video. The digital cluster looks amazing.
@s.t.k.r. 2 жыл бұрын
Also there is protective film over some of the gauges so make sure you peel those off. Also make sure you set your dip switch and your volts I had to call them to figure this out because I was not that knowledgeable on that
@ogboss4898 4 жыл бұрын
Just got mine 3 weeks later nice though 👍🏾👍🏾
@MrTestertester 4 жыл бұрын
Looks good!
@alexsmooth6866 3 жыл бұрын
I just got mine today .. they were out of stock. Make sure you order MPH if you are in the U.S
@rodriguesgarza23 Жыл бұрын
Can you make video to how to connect digital speedster cable
@bobhilly546312156332 Жыл бұрын
Dose the gauge bezel come with it?
@juanenriquegomezfranco8412 3 жыл бұрын
Who’s got an actual video of them installing and putting the wires together?
@RustyRaysGarage 3 жыл бұрын
Juan I’ll cover that in my next video. Coming soon!
@juanenriquegomezfranco8412 3 жыл бұрын
Ray thank you man, you are a life saver 🙏🏾
@juanenriquegomezfranco8412 3 жыл бұрын
Because I’ve had my cluster for about 2 months but I haven’t installed it since I have no clue how to and I don’t wanna mess anything up
@inthewoods7092 4 жыл бұрын
I am going to do this to my 79 f350. How much did it cost
@RustyRaysGarage 4 жыл бұрын
ismael g was about $400. Which seemed high to be at the time but after I got it together I felt it was worth it. It’ll look great once it’s instilled. I’m also doing the American autowire harness update and the holly sniper kit.
@inthewoods7092 4 жыл бұрын
Ray nice lmk how it goes!!. I’m currently doing rust repair almost done. Will be putting in an order on Friday for dash kit, wire harness and LED light all around
@RustyRaysGarage 4 жыл бұрын
ismael g awesome 👍🏻 the new harness is a must in these trucks. I recommend the American autowire harness. Every wire is labeled and it’s pretty easy to install. You will have to build all your plugs and do a little soldering but it’s pretty easy. I’ll have a video up on that too once it’s done. Good luck on your project!
@joelmoran4790 4 жыл бұрын
Nice part you have installed in you truck ready?
@rauldelosreyes9909 3 жыл бұрын
How does the speedometer work ?
@RustyRaysGarage 3 жыл бұрын
It seems to work ok. Occasionally it seems to lag but only for a second.
@TheYaneus Жыл бұрын
@@RustyRaysGarage and how does it work and what's Your opinion after 2years ?
@RustyRaysGarage Жыл бұрын
@@TheYaneus The a few leds went out in the temp gauge and the “brights” indicator light is annoyingly bright when it’s dark. Other than that it’s been great. I’m sure intellitronix would helped with the gauge issue but I didn’t want to take it all apart if they wanted me to send it back.
@TheYaneus Жыл бұрын
@@RustyRaysGarage Thanks for replying. Much appreciated.
@juanenriquegomezfranco8412 3 жыл бұрын
Just installed it after looking for 5 months for someone to install it
@juanenriquegomezfranco8412 3 жыл бұрын
And just realized it’s kph and Celsius 🤦🏽♂️
@issacbetancourt249 3 жыл бұрын
Do you have the install videos
@Bulldog187th 4 жыл бұрын
Im doing a custom dash because when I bought my gauges they did not have this set. So is your truck 4x4? If so , can you tell me how you did the VSS. I cant get mine to go into my np205
Auto Retro
Рет қаралды 2 МЛН