Рет қаралды 88,855
Available from: zapwizard.com/...
Flat bit-holder also available! • Flat Bit Driver Mod fo...
This user-installed modification makes it so the Free P4 can use 4mm precision bits, as well as adding a perpendicular 4mm and 1/4" wrench.
Order your Leatherman FREE P4: amzn.to/3wqU6w9
Or the Leatherman FREE P2: amzn.to/3fGam6E
Update:
You will now need to super-glue your magnets in place. The newest version of the design doesn't require any hammering, but if you don't glue the magnets, they can stick to the hinge instead of your bit. Easiest way to do this is put a long hex key though the front hole, attach the magnets to the key, then apply a small bit of super-glue to the magnets, and pull them into the hole using the hex key. If you need to push them, use a non-metallic tool such as a tooth pick or plastic rod. Wait for the glue to set before installing in your tool.
Want to see how it was designed? Visit:
forum.multitoo...