Intro 2 Clicks Out: Super Tenere Dirt & Street Suspension Setups

Рет қаралды 19,113

3 жыл бұрын

INTRO: full video here davemosstuning.com/2-clicks-o...
Because dual sports are designed to handle 2 different terrains, they benefit greatly with a setup for each environment, if you in fact ride them in both. What's more, they often have Long Travel suspension which requires a different base range for sag than for your average street motorcycle.

Пікірлер: 15

@Motospeedua 3 жыл бұрын

THANKS! very useful video

@pckmuresan 3 жыл бұрын

Hello Dave and Dave. I was wondering if possible to tune an KTM 950 Adventure with long travel, for 75% offroad use. Do I need a private session, do I need "premium" on the website? I am from Romania, so a 1 to 1 session it will be "hard to get". Thank you for your answer and understanding

@CatalystReactionSBW 3 жыл бұрын

Hi Patrick. This is why I created Remote Tuning. The 1-1 session would be easy to do via video - just a matter of time synchronization. If you know how to use tools I can email you settings. Please contact me via dave@davemosstuning.com

@tysonkampbjj 3 жыл бұрын

Liked and subscribed!! Fun fact: If you try to run away from Dave, he will catch you.

@CatalystReactionSBW 3 жыл бұрын

Good morning Tyson! How are you sir? Hope all is well in your world. My regards to Phil.

@tysonkampbjj 3 жыл бұрын

@@CatalystReactionSBW We are both still in the south bay, would love to meet up for a pint or a yard or whatever. You look like you have a full schedule for sure but if you have a spare half day let's make it happen (I am mobile). My number is the same, I think I have your old one. Breezy has mine. Cheers!

@Davigu 3 жыл бұрын

Hey Dave, If bottom out is at 20 mm. At what height do i want the zip tie not to go past, to give my self a safe margin. 40mm? gives me 20 mm before bottom For track use Thanks in advance

@CatalystReactionSBW 3 жыл бұрын

Ideal is 20-30mm from the bottom out mark, so given your understanding 50-40mm would be the number range you are looking at.

@Davigu 3 жыл бұрын

@@CatalystReactionSBW awesome thanks

@semenovr Жыл бұрын

This guy must. A big deal knows a lot of secrets

@gerardsalmon4960 2 жыл бұрын

What do you think of the Tenere ES model , or would you recommend to stay away from the ES & stay with the non ES model 14 & up model year

@CatalystReactionSBW 2 жыл бұрын

Electronic suspension is always worth evaluating as an option especially if you are not comfortable with tools. You can test settings with the push of a button and see what setting makes you smile most for street and dirt. If you are hands on, having a manual adjuster allows you to fine tune suspension so the ES option becomes less of a need.

@faithpath8283 3 жыл бұрын

Here is the TRICK to always get the correct direction for Scews and Adjusters, no matter what direction they are facing, or how deep the are hidden in different orientations. to tighten (screw in) 1, Use the Right hand (as some english ppl say righty tighty) 2, the turn direction is from Thumb towards your Fingers (index, middle,...). Also its the direction you have the most power. to loosen (screw out) 1, Use the Left hand (as some english ppl say lefty loosy) 2, the turn Direction is also from Thumb towards your Fingers (index, middle,...) Also its the direction you have the most power. In layman terms: Your hands are mirror images of each other, just as the threading of screws would be. The world has chosen to only use right handed screw threads in general. So your right hand with its natural motion will screw them in, and your left hand do the opposite of that. No matter which direction your right palm faces, going from thumb to finger always goes clockwise, and screws and adjusters get turned in with a clockwise motion. In the actual lingo: The r-chirality of your right hand fits the p-helical chirality of the screw thread, as the s-chirality of your left hand opposes the p-helical chirality of the screw thread. One could be fancy, invert the turn direction and use the same chirality bias to use one hand for both operations, fastening and loosening =)

@CatalystReactionSBW 3 жыл бұрын

Dave Williams, editor, replying here. Brilliant. I was seeing myself switching hands for each action and now I understand why.