Intro & How to Install | Boomba Wing Riser Kit for '14+ Ford Fiesta ST

No video

Intro & How to Install | Boomba Wing Riser Kit for '14+ Ford Fiesta ST

Рет қаралды 60,410

Boomba Racing

9 жыл бұрын

Boomba Racing Aluminum Wing Riser Kit for the Fiesta ST Installation Guide
www.boombaracin...

Пікірлер: 48

@kevinl6231 8 жыл бұрын

Thanks for the video. It made the installation straightforward and saved me lots of time. Love the risers and the look.

@BoombaRacing 8 жыл бұрын

+Kevin Lew Thanks for the support! Glad to hear you are happy with the product.

@Flewpygoober 8 жыл бұрын

Easy install and looks great! Would have been installed in 30 min by myself but had a Ford hiccup. At first I thought the price was a little steep but after taking in the R&D into consideration and seeing the quality when they arrived I was more than satisfied. The only problem I had was a cross threaded main wing bolt but that was Ford's fault and not Boomba's at all! I actually took a bolt off my STi to fasten my risers lol. Great product guys!!!

@BoombaRacing 8 жыл бұрын

+Jake Gimigliano Repurposing bolts from a Subaru lol. Glad to hear you got everything on without too much trouble! We really like to put our best foot forward when it comes to the quality of our products!

@FireworkFreakNL 5 жыл бұрын

Love the standard windows song ❤️

@bblando65 8 жыл бұрын

Neat idea...so, those decals you provided are suppose to last the lifetime of the car and keep rain out of the hatch? Wouldn't it be better to supply some rubber plugs to place in those holes that aren't used?

@BoombaRacing 8 жыл бұрын

The provided decals are 7-10 year rated vinyl. As long as they are applied on a clean surface, they should have no issues!

@MustangsbyMatt 6 жыл бұрын

I like this kit. What wheels are those on the car? I have the same orange ST and I think those wheels would look good on my car.

@BoombaRacing 6 жыл бұрын

They are Sparco Assetto Gara's, We think they look pretty good on this car!

@rmfhmusic1 Жыл бұрын

Would it fot a mk7.5 st-line? (2017 gen)

@BoombaRacing Жыл бұрын

Hello! Yes it would!!!

@JulianOlson 4 жыл бұрын

if I dropped the bolt down the hatch, how would I get the bolt out?

@lUcario97676 4 жыл бұрын

anyone know where I can find both of the two front bolts

@tapis2 7 жыл бұрын

will your stickers secure my hatch from heavy snow ? where i live snow is a big issue. Thanks

@BoombaRacing 7 жыл бұрын

We developed and use these in Illinois where we also get a lot of snow. Weather is no issue for these stickers as they are rated for 7+ years in outdoor conditions. You've got nothing to worry about!

@cjs2002cs 4 жыл бұрын

Would these fit a Ford Fiesta titanium 2010 with the added spoiler?

@stefanparsons8212 4 жыл бұрын

dont see why not. Thats what a return policy is for eh?

@BIGMAFFYD 7 жыл бұрын

Would these risers fit on a Mk7 Fiesta Zetec S or are they designed to only fit a Mk7 Fiesta ST?

@BoombaRacing 7 жыл бұрын

They work on the regular Zetec as well as the ST. These will work on any MK7 Fiesta.

@RafaelTrog Жыл бұрын

Is it necessary to make the thread for the thinner screws?

@BoombaRacing Жыл бұрын

Hello! No, it is not necessary to create new threads as our provided hardware bolts in directly to the risers and the risers reuse the stock mounting points! Let us know if you have any more questions!

@RafaelTrog Жыл бұрын

@@BoombaRacing Thanks for the reply! In my case, the thinner, pointy bolts don't fit anywhere on my spoiler, it fits the set piece well, but not the car part!

@BoombaRacing Жыл бұрын

@@RafaelTrog Hi! Just confirming what is the year of your vehicle and do you have an ST trim?

@mikehennessy9495 6 жыл бұрын

Once the spoiler has been lifted with the brake cable and washer cable through, what happens to the two large holes that the wires go through? As they are pretty exposed to rain?!

@BoombaRacing 6 жыл бұрын

Those holes do remain open, however due to the aerodynamics, it has never proven to be an issue with all of the kits we've sold. If it really does cause for concern, you can always seal the holes with electrical tape as well.

@mikehennessy9495 6 жыл бұрын

BoombaRacingInc Ok mate. Thanks v much for the quick response. Also, what type of material is used for the raisers?

@BoombaRacing 6 жыл бұрын

Our risers are made of aircraft grade 6061 billet aluminum.

@santiagocabrera9306 7 жыл бұрын

but on a mk7 fiesta zetec the brake wire is shorter, how can i conect it?

@BoombaRacing 7 жыл бұрын

If the wiring harness does not reach, you will have to extend it.

@BoombaRacing 7 жыл бұрын

Although we have people running these on non-ST Fiestas and this has never been an issue in the past.

@alexisvieira9368 6 жыл бұрын

Will this fit the 2013 fiesta st? All the kits I see on eBay are 2014-up

@BoombaRacing 6 жыл бұрын

America never got a 2013 Fiesta ST. They were all 2014+. These will also fit non-ST so if you have a 2013 Fiesta, it should work!

@alexisvieira9368 6 жыл бұрын

BoombaRacingInc does this fit the Europeans fiestas?

@BoombaRacing 6 жыл бұрын

Yes our wing risers will fit European Fiestas.

@maayaa77 4 жыл бұрын

cut the antenna tho.. ouch

@BoombaRacing 4 жыл бұрын

Most guys skip that step and just opt to get a stubby antenna.

@sRxyo 8 жыл бұрын

150$? OMG

@BoombaRacing 8 жыл бұрын

These pieces are highly tested, machined from billet aluminum, and completely weather tight. This is a much more complete solution rather than going to Home Depot for some washers.

@woodsy555 6 жыл бұрын

Agreed.

@RgW00D 6 жыл бұрын

Yes. The market for the Fiesta is small. You've got to eat that production cost for all Fiesta parts.

@arrabe33 3 жыл бұрын

😶148$... VS 36$ in banggod

@BoombaRacing 3 жыл бұрын

Eh, not everyone is into poorly engineered and copied chinese knock-offs. Most people are willing to pay for made in the USA quality, but hey you do you!