WING RISER KIT INSTALL! | FIESTA ST

No video

WING RISER KIT INSTALL! | FIESTA ST | BOOMBA RACING

Рет қаралды 119,623

6 жыл бұрын

I install a set of Boomba Racing wing risers!
This kit made in the USA from quality billet aluminium (or aluminum as they would say!) are the original and best wing risers available for the Ford Fiesta ST.
Available in a range of colors to suit taste, I got them in red, partly to match the other Boomba parts I have under the bonnet but also because I love the idea of contrasting colors so offsetting these against the Fiesta's spirit blue looks awesome!
Watch as I show the process of installing the risers and getting that subtle yet noticeable aggressive look!
Check out www.becauseracecarbox.com and get your own awesome automotive goody boxes!
GET 10% DISCOUNT WITH CODE 'ADAM'!
Ships to Europe and USA as well as UK!
Subscribe to my channel: bit.ly/29hfAm6
Instagram: bit.ly/2930j8A
Twitter: bit.ly/2930j8A
Music by Joakim Karud / joakimkarud

Пікірлер: 114

@robertgrieve8580 3 жыл бұрын

Great video dude. I put spoiler risers on my st spoiler today by following your video and it was spot on as you covered every part of installation 👍

@LeroyL113 5 ай бұрын

Really nice video, bought the risers as a gift for my girlfriend she loves them! makes here ST even beter! Nice and easy video to follow

@fraserb2 2 жыл бұрын

Thank you mate, put them on my new 2017 black st line, much better than the other videos I saw 👍🏻

@mikehennessy9495 6 жыл бұрын

Top quality video dude, was so easy to follow your installation rather than reading it from the net. 10/10👍🏼👍🏼

@AdamRainey 6 жыл бұрын

Cheers Mike!

@user-xj7xv7or7e 2 ай бұрын

@@AdamRainey Hello Adam, i really like your videos. Helps me to install some things on my mk7.5 myself. Keep dropping them. Now i want to replace the standard roof spoiler on my car for a ST-line spoiler. Can you give me some tips how to extend the third brake light cable and the windshield washer line, because both are to short. Thanks mate.

@AdamRainey 2 ай бұрын

@@user-xj7xv7or7e for electrical wire extension I would be cutting and extending with the same gauge of wire, soldering it and wrapping in heat shrink. For the washer line, you can get little plastic coupler thingd that are barbed either end so would just push onto the end of the existing tube and the additional tube that you get, assuming you can get the same kind of tube somewhere

@iKierBear94 4 жыл бұрын

Cheers bro you helped me out step by step

@AdamRainey 4 жыл бұрын

No worries mate, cheers :)

@mattdupper2996 Жыл бұрын

I understand why some of you like this but personally had these on my american fiesta and the durability was bad. love it set flush.

@patrickkawka 6 жыл бұрын

Next time maybe you can do a before and after shot at the end of the video. That would be super cool and help a lot. Great vid looks good!

@matthewmoore661 5 ай бұрын

Looks just right.

@bikeyspice 4 жыл бұрын

Excellent video, nice to watch. Don't rate the mod personally, but each to their own

@AdamRainey 4 жыл бұрын

Cheers :)

@fordyford 6 жыл бұрын

I like the added angle some of these kits add, just not gap it leaves. If someone made a molded solid piece fibreglass kit (I guess this would come at an extra cost) I would be interested. Just subscribed too.

@AdamRainey 6 жыл бұрын

Fordy Ford I see your point, if someone made such a thing I would also consider it!

@GUE891 10 ай бұрын

L'azienda che produce il pezzo che cercate si chiama Delta styling

@riyadislam6760 9 ай бұрын

Very helpful ! Doing mine now ❤

@BoombaRacing 6 жыл бұрын

Thanks for the video! Glad to hear you like em!

@AdamRainey 6 жыл бұрын

Thanks for watching my video and thanks for making quality parts! :D

@hedairzain7077 6 жыл бұрын

i wanna buy this wings riser for my 2011 fiesta s...i'm from malaysia

@BoombaRacing 6 жыл бұрын

We ship our products worldwide! Our risers will work on the non-ST models as well.

@diobruttoporco 6 жыл бұрын

IMHO this is one of the most chavy looking mods you can do to a Fiesta ST... to each their own I guess...

@snowandlightsmusic 6 жыл бұрын

diobruttoporco agreed. This looks terrible, like you backed into something and never fixed your car

@kevinl6231 4 жыл бұрын

It’s definitely a love/hate thing. I get good reviews on mine😁.

@John..18 6 жыл бұрын

Very informative video, can you get a riser kit for the big hat,?? lol,,

@cammyf56 6 жыл бұрын

this video has made me want to buy themes much thanks Adam !!!

@AdamRainey 6 жыл бұрын

Camfred_Bmx awesome 😀 Thank you for watching!

@grwilson58 6 жыл бұрын

The risers look really good Adam, a question for you have you replaced the rear motor mount yet? I have a torque solution upgrade motor mount that I'll probably wait till the spring to install after our rotten Pennsylvania winter weather is over!

@AdamRainey 6 жыл бұрын

I have not, no. I do have a mountune mount sitting waiting to be installed but just not got round to doing it yet. I hear it is a very worthy thing to do though! Cheers :D

@joechmiel709 6 жыл бұрын

Those do look good, any worries that the wire and hose ate exposed tho?...and yeah there are cheaper versions out there but those boomba ones really have that quality refined look to them, great work Adam

@turbogeoduck1 6 жыл бұрын

Very well done. I am not sure of the purpose of the risers, tho. Besides looms, I mean.

@AdamRainey 6 жыл бұрын

They are indeed purely cosmetic :D

@woodsy555 6 жыл бұрын

Another awesome video buddie big thumbs up!

@royhess1406 4 жыл бұрын

what a great video! good looks dude

@AdamRainey 4 жыл бұрын

Cheers Roy! 🍻

@royhess1406 4 жыл бұрын

Adam Rainey just bought a Fiesta today and this will be my first mod.

@AdamRainey 4 жыл бұрын

@@royhess1406 nice, first of many i hope!

@SonGokuDragon 6 жыл бұрын

Hey Adam, how does it look when it rains, comes in the taped openings rain? I hope that there is no rust. Thx

@AdamRainey 6 жыл бұрын

Hi Tahir, the taped openings are fine, the tape seems pretty good. The main concern I would have is with the openings at the back of the wing where the electrical connection and washer hose go through. They are 2 very big circular holes that are mostly exposed so it is possible rain, etc could get inside the wing. Cheers!

@SonGokuDragon 6 жыл бұрын

Adam Rainey hey, thanks for the answer! Did you have any problems till now ? When did you build it in ?

@AdamRainey 6 жыл бұрын

No I had no problems, just was something on my mind. They went on maybe a week or so before this video went live. Cheers!

@kevinl6231 6 жыл бұрын

Adam Rainey oh, now I know why so much water pours down when I open the hatch after washing the car. Another thing: I didn’t like the brake light wire being so exposed - so I wrapped it with electrical tape.

@markellis1634 6 жыл бұрын

Hi you haven’t really reviewed your catback since getting it please let us know how it is I’m thinking of getting one for mine!

@_multiverse_ 6 жыл бұрын

If you want your car to look dumb and completely spoil (no pun intended) it's aero go ahead and do this "mod" it's more of a downgrade imo.

@AdamRainey 6 жыл бұрын

You are correct sir. I have since removed them and gone to a stock shaped carbon fiber rear wing!

@Deadpoolmasterchief 4 жыл бұрын

Adam Rainey so u removed them cause people didn’t like em I thought u do what YOU want don’t let people criticize u

@operamatthew 4 жыл бұрын

MERICA #1 you have no idea why he removed them. people can have a change of heart you know.

@1001Hobbies 4 жыл бұрын

@lowda9 - Ford took a lot of extra time engineering the spoilers on the Fiesta and Focus in order to get the best aerodynamics so that the air would fill in behind the vehicle (hatchbacks have wide air displacement) to reduce the vacuum that occurs behind the vehicle, which negatively reduces fuel mileage. I get 32 to 36 mpg in mixed driving in my manual trans Focus. Now, when you CHANGE the position of the spoiler you ruin these aerodynamics. The car is a front wheel drive (traction in front). You don't need to worry about down force on the rear wheels which are just holding up the back end. When you change the position of the rear spoiler you are performing a detriment to your car.

@Cptyash 4 жыл бұрын

not gonna lie this is the only comment that includes talking about aerodynamics in it and it's why I'm here. Thanks for the reassurance of not doing this mod although it looks really cool 🤣

@rhyzap 2 жыл бұрын

The stickers I got with mine to cover the holes are not holding up well feel they will break soon, anyone know of any small sized grommets to use there instead and what size? thanks

@CWH182 4 жыл бұрын

Dead easy video to follow buddy. I’m a total car novice but managed to knock it out in 30 mins, so thanks for dumbing it down for me!

@AdamRainey 4 жыл бұрын

Happy days mate, cheers :)

@1001Hobbies 4 жыл бұрын

Ford took a lot of extra time engineering the spoilers on the Fiesta and Focus in order to get the best aerodynamics so that the air would fill in behind the vehicle (hatchbacks have wide air displacement) to reduce the vacuum that occurs behind the vehicle, which negatively reduces fuel mileage. I get 32 to 36 mpg in mixed driving in my manual trans Focus. Now, when you CHANGE the position of the spoiler you ruin these aerodynamics. The car is a front wheel drive. You don't need to worry about down force on the rear wheels which are just holding up the back end. When you change the position of the rear spoiler you are performing a detriment to your car.

@TheMeesterNoob 4 жыл бұрын

Although not to my personal taste, informative video bud, one less thing I need to buy for my fez 😂

@AdamRainey 4 жыл бұрын

This defo seems to be a polarizing mod! I liked them but ended up removing them in favor of a carbon rear wing :)

@cesargalon7246 5 жыл бұрын

do these fit the fiesta ecoboost 1.0ltr turbo charge from philippines ? Thanks Adam

@AdamRainey 5 жыл бұрын

Hi Cesar, yes I think the holes should be in the same place. Cheers :)

@andreabaldini8439 2 жыл бұрын

Is this kit strong or it need to be changed during months?

@AdamRainey 2 жыл бұрын

I would say super strong, no need to change

@800Viffer 5 жыл бұрын

Very good video tutorial but not sure the mod is an improvement in terms of the look of the car.

@AdamRainey 5 жыл бұрын

That is entirely subjective, cheers

@800Viffer 5 жыл бұрын

@@AdamRainey I agree. Maybe I am not so keen on sticky out adornments after spotting a Civic Type R with a bolt on spoiler that could have been nicked from Amelia Earhart's plane. Fecking ridiculous looking. You Fiesta looks better than that thought 😊

@AdamRainey 5 жыл бұрын

I would say there is a big difference between these risers and a bolted on BGW lol I liked these risers for a while but then I regained an appreciation for the fitted look when I got the carbon fibre wing

@800Viffer 5 жыл бұрын

@@AdamRainey Huge difference and my comment was meant to be a little tongue in cheek. Want to say again I thought your tutorial was very well done. 👍

@AdamRainey 5 жыл бұрын

That's cool, cheers

@callumsturgess5557 Жыл бұрын

Would these work on a Fiesta Zetec S??

@CJ-ie4ue Жыл бұрын

Are these worth of money? They are very expensive.

@matt12345b 6 жыл бұрын

U done the flaps yet dude? Done mine and looking forward to your video

@AdamRainey 6 жыл бұрын

Peng_Productions lol still not got it done, maybe next week. Looking good on yours?

@matt12345b 6 жыл бұрын

Adam Rainey yea mate Ford didn't do the rear ones right. They put the 2 large spacers on 1 side and 2 small the other, fixed it now though, also removed the pads from the back as they didn't look too nice, I also removed the metal bars from the front as they don't bend as flush as i would like as they was originally designed for the American one, still fit fine anyway now, but they do look perfect tbh I love the look now

@megadethdudeluke 6 жыл бұрын

Cool do they come indifferent colours ?

@AdamRainey 6 жыл бұрын

Hi Luke, they do yes. They come in natural (like silver), red, blue and black. Cheers!

@megadethdudeluke 6 жыл бұрын

Adam Rainey cheers 👍

@cesargalon7246 6 жыл бұрын

Hey Adam where i can buy boomba racing? I’m from philippines thanks

@AdamRainey 6 жыл бұрын

Hi Cesar, I'm not quite sure - you may need to email Boomba directly and ask them about a local distributor to you

@cesargalon7246 6 жыл бұрын

Thanks Adam God bless!

@thepunisher454 4 жыл бұрын

@@cesargalon7246 May nakita knb boss bilihan dto sa pinas?

@tomsmith2540 4 ай бұрын

Did the red sticker you put on let any water in?

@AdamRainey 4 ай бұрын

Nope, I never had any water ingress

@tomsmith2540 4 ай бұрын

@@AdamRainey So any tape will work as long as the hole is covered?

@AdamRainey 4 ай бұрын

Not all tapes are created equally. Any tape that is strong enough that uses an adhesive suitable for the elements, sure

@hedairzain7077 6 жыл бұрын

can you tell me where i can buy this wings riser...i'm from malaysia

@AdamRainey 6 жыл бұрын

Hey Hedair, I got them from SiCo developments in the UK but I don't know if they post to Malaysia - maybe contact them! Cheers!

@manuar3054 5 жыл бұрын

@@nl2935 can i get the address please. Tq

@Cptyash 4 жыл бұрын

Boleh dapat kat Shopee bro

@jmaa9508 6 жыл бұрын

link buy plis from spain

@paolodimagiba3621 5 жыл бұрын

hi .. where to buy ?? here in philippines

@mojeebarab7159 4 жыл бұрын

lazada for 1,048 pesos ..

@wilsonrositaortiz5037 6 жыл бұрын

Does it fit to my mk7 2010?

@AdamRainey 6 жыл бұрын

It might do but you would need to check with Boomba

@Sportek24 4 жыл бұрын

Does anyone know where can I buy the wing extension cord ford fiesta st ?

@AdamRainey 4 жыл бұрын

For the brake light?

@Sportek24 4 жыл бұрын

@@AdamRainey yes for the wing light , is like a little extension that goes in the third rear light the wing I can't find it anywhere I saw 1 online for $200 that's too much for a extension wing

@jodz_89 6 жыл бұрын

Any Chance you can give me the heights of each raiser?

@AdamRainey 6 жыл бұрын

I don't know exactly without trying to measure. Are you comparing to other risers?

@jodz_89 6 жыл бұрын

Nah looking at 3D printing my own. Living in SA its just too expensive to import these parts.

@zakgio2327 3 жыл бұрын

"I like the contrast of red and blue" Wears red and blue

@alexcantlow1434 6 жыл бұрын

Damb thought it be a air brake kit I'm officially a twat

@AdamRainey 6 жыл бұрын

Alex Cantlow Hi Alex, you are not a twat, rather you simply have a grasp/ understanding of aerodynamics! These risers essentially act like a bit of an air brake only permanently on because they decrease aerodynamic efficiency by increasing drag in the name of aesthetics! I have since removed these in favour of a properly fitted carbon fiber wing 😀

@alexcantlow1434 6 жыл бұрын

Adam Rainey LOL didn't read the title propley and ohh thought it would with the massive shut line imagine the drag would be created around that area or turbulent air flow one or both would drag it down a bit more losing hp does look oright tho NGL

@tinglydingle 6 жыл бұрын

That would be fucking awesome, and probably not unfeasably difficult. You'd need a pneumatic system to actually push the airbrake up, some bearings, and it'd have to tie into the electrical system, probably on the brake light circuit, so that it actually activates when you use the brakes.

@nathaniredale6210 5 жыл бұрын

Great car but they could of been same colour as car

@AdamRainey 5 жыл бұрын

The blue that boomba do is lighter than spirit blue on the ST so wouldn't have matched in anyway so I took the opportunity to do a cool contrast with the red

@GUE891 10 ай бұрын

I Riser vanno montati tutti nella medesima posizione...... devono alzare l'alettone e arretrarlo .... Quindi con l'alettone rovesciato dovranno guardare tutti verso avanti e non qualcuno avanti qualcuno a destra e qualcuno a sinistra😂😂😂😂😂

@AdamRainey 10 ай бұрын

You are an idiotio

@GUE891 10 ай бұрын

Quando vuoi provare qualche bella macchina Vieni nel mio garage. .. Toyota Yaris gr..... Alfa Romeo 4C. Audi rs6 ABT .....🖕🖕🖕🖕🖕