Link: wagan.com/coll...
Today we're going to take a look at how to jump start your vehicle using the iOnBoost Torque. More specifically, we'll be using the iOnBoost V10 Torque to demonstrate. The same instructions can be used for the V8 Torque model as well.
0:15 Make sure your iOnBoost jump starter is fully charged before using
0:21 Set the parking brake, turn off all electrical devices including headlights, radios, and any other accessories
0:30 Locate your car battery and its positive/negative terminals
0:39 Connect the jumper cables to the iOnBoost Torque
0:55 Overview of Safety Features
1:09 Connect the clamps to the battery terminals
1:35 Start the vehicle
1:47 Disconnect the jumper cables from the battery
For more information, visit our website at: wagan.com/
Follow us on Instagram: / wagantech