iPad pro 9.7 Not charging - Faulty Tristar & Battery connector replacement

No video

iPad pro 9.7 Not charging - Faulty Tristar & Battery connector replacement

Рет қаралды 70,421

Күн бұрын

⭕ Ask questions and Engage in our Forum at northridgefix....
⭕ Need a repair? northridgefix.c...
⭕ Visit our ecommerce shop and buy all your tools at northridgefix.com
⭕ We are an Amtech Flux Distributor. Buy AMTECH NC-559-V2-TF Flux
northridgefix....
Microscope northridgefix....
UNI-T UTi260B thermal Camera
northridgefix....
Grinding pen
northridgefix....
Low Melt Solder
northridgefix....
NorthridgeFix T-shirts
northridgefix....
Weller Soldering station ebay.us/1mvgt5
=================================================== If you are local, drop in and say hello
NorthridgeFix
19365 Business Center Drive, Unit 7
Northridge, CA 91324
Phone: 818-668-7058
NorthridgeFix.com

Пікірлер: 124

@darrenstrathdee7425 4 жыл бұрын

I am a repair technician myself back in scotland. What i like about you is that you attempt to repair anything electronic. Thats how a true technician does his work.

@d2rinaldi 4 жыл бұрын

Smiling at new employee! Fortunate to be working with you! Best to all. Love your work!

@sosscarz 3 жыл бұрын

I'm starting to really like this guy. Awesome stuff and helping me with my hobby. I'm an automotive technician and like to dabble in board repair for fun and your channel is awesome.

@RoadRunnerMeep 4 жыл бұрын

Love channels like this, you learn and come up with new techniques

@GhostDevilGamer 3 жыл бұрын

Quality stuff, it was so satisfying to watch the precision of this man's hand, great stuff. Ipad was embarrassing this gentleman by taking toooooooo long to boot but he had happy ending, cheers 🍻

@leo_gris 3 жыл бұрын

BRO, you are amazing, thanks to this video I could identify what was wrong with my iPad (I tried to change my battery and almost I brokes the pins for the battery connector, I just bended one of them ) THANKS A LOT!!!!!

@sharfazhameed6382 3 жыл бұрын

I love your trick of using the Desolder Wick holding with hot tweezers

@macbp8455 4 жыл бұрын

يا اخي والله اني توقعت اشتركاتك مليون وفوق بس تفاجئ انه 51 الف والله فيديوهاك احسن من افضل الاجانب في اليوتيوب... انشاءالله توصل

@peekpt 4 жыл бұрын

The smile when we fix something...

@ACOnetwork 3 жыл бұрын

It never gets old 😁

@ianstyles9759 2 жыл бұрын

You never hide anything from us I love your work I learnt lots from you and the big boss

@chethankiran5478 4 жыл бұрын

Big fan of you sir 🤗🤗🤗💖💖💕💖💞🙏🏻🙏🏻Love from India... 😍😍😍

@fpk1954 Жыл бұрын

Viel Aufwand - aber Alex macht das Super !

@andreasaurel-van28 4 жыл бұрын

Masterpiece again and your smile makes my day shine thank you for the great videos you do for us 🙏

@guillarte016 4 жыл бұрын

Best tutorial ever I’m from Philippines tech I’m watching every upload

@ohgie888moreno 3 жыл бұрын

Love how you combine right tools and knowledge to fix this devices..more power.

@rafathali1999 4 жыл бұрын

Even If I fix something In my shop like mobiles, tablets etc... I feel the same😊 it feels like we achieved something awesome... it also an evidence that we are smart ..

@mohdzuhair90 4 жыл бұрын

Victory smile ❤ ابتسامه الانتصار

@gamerelated3887 8 ай бұрын

while watching this video I remembered a time where you used a tristar tester board to determine the voltages and I was wondering if you knew that the Tristar tester has a PRO mode where it tells you the voltage from the charge port and the voltage of every rail in the iPad. just hold the left and right button down BEFORE you turn on the tester. While turning the switch on continue to hold the left and right buttons down and keep holding until it turns on and starts the test. it will then do the same test but will show you voltages on all the rails.

@TariqAq 4 жыл бұрын

Welcome Ismail! Lucky you bro!

@ghaziterbela 4 жыл бұрын

Ismail will be so lucky to learn from you I wish he could be honest person like his name

@Anjalhatiya 3 жыл бұрын

Sir you have great techniques to fix phones i love you're all videos love from south Africa you really do good job i want to learn lots of things 😍

@hightttech 4 жыл бұрын

I too LOVE low melt solder. I was introduced to it by ZEPHYRTRONICS many moons ago, and it truly improved my game. I've had peers debate me about it's usefulness, arguing that it's a beginner's tool, expensive, messy and time consuming... meanwhile they are ripping pads and pulling sleeves out of PTH's and i am not. If you've never tried it, don't let the naysayers stop you. NF is correct when he say, "It's magical."

@albaniaiptv8335 3 жыл бұрын

You are very pro at soldering chips

@MZABID 3 жыл бұрын

Now that's a lot of flucks there ... Loved ur soldering techniques

@bhaveshjoshi8141 4 жыл бұрын

Sir ,I love your reactions When solve the problem Very satisfying smile on your face.... That's way, I see all your video till end ........ Love from India Have a nice day......

@ulyssesgalang7416 3 жыл бұрын

Very consistent, looking forward for more strategy...im from philippines

@gbowne1 4 жыл бұрын

I found its also harder to remove solder without at least some flux and enough heat and good iron tips. I'm definitely going to have to gets some of that wick. The stuff I use is horrible.

@joshuawelch9701 Жыл бұрын

Pretty sure I might of mangled some pins on my kids iPad 7 , need this fix done

@crocolat01 4 жыл бұрын

Love your smiles, so happy

@EBRIMA-cz6io 4 жыл бұрын

where can i get that device

@BadrQarzeez 3 жыл бұрын

14:01 Good tools do half of the job, and sometimes the whole job.

@janchristensen9858 2 жыл бұрын

Amazing that Technics has made something like this! I guess that MY FIRST SONY cassettes deck is much better made 😂

@Dazwillett 4 жыл бұрын

Love these videos 👍

@ricardoavelar6270 4 жыл бұрын

Ismael is the new employee you've looking for microsoldering? If yes and if he's good we want a video with him! Hehehe

@NorthridgeFix 4 жыл бұрын

Ismail handles Phone, customer support and office work. I"m still interviewing people for the micro soldering positions.

@jamalsk849 4 жыл бұрын

I love your work

@hilas195 4 жыл бұрын

thanks for your videos. Everytime we learn more

@em666a 3 жыл бұрын

Good Morning. You came across a glitch after replacing the battery for the iPad Pro 9.7 is a 100% permanent look. And no matter how long the iPad works it does not move. If the battery is genuine everything works fine

@DR.ELEKTRIK 3 жыл бұрын

The tristar meter still passed it with bad connectors?

@indianarmystatus1327 4 жыл бұрын

Sir I'm indian and helping your videos

@rashidardhah83 3 жыл бұрын

nice work Alex, but I wonder why didn't you pull those pins a little bit out as you sometimes did in some situations.

@yundorri 2 жыл бұрын

Thanks for video. I have question. my daughter has iPad 2nd gen 12.9 A1670 model and only specific cable could charge it but others - includes original charge cable - could not charge the pad not at all. How can it be? Some says by replacing the charging doc flex cable could resolve that problem. It this right? Please give me some hints!! Have a nice day.

@garylove2836 Жыл бұрын

I bought a new iPad from micro center after 6 months I notice when the battery gets to like 80 percent it will stop charging I clean the port change charger and cables and still does the same thing.the only way I get it to charge 100 percent is I have to press the power button off and then turn the tablet back on and then it charges to 100 percent. But I have to do this almost all the time what you think is wrong? And is still under factory warranty.

@lucianolongobardi9050 3 жыл бұрын

on 1.41s I see 2 diodes ... one from de left it seems blown .. or i am wrong ?

@hazimhazim9235 4 жыл бұрын

Nice video, Can you send the models number of your solder iron tips please Thank you

@TheCod3r 4 жыл бұрын

Serious question. If the wick you use is so good why do you have to add flux to it? I use Gootwick and never need to add flux to be able to wick pads

@TheCod3r 4 жыл бұрын

@@Neodymium5312 lol I know what flux does, but any decent wick will already be coated in flux

@TheCod3r 4 жыл бұрын

@@Neodymium5312 no I agree I'm not mocking your response, it was a genuine question. I'm just saying the wick I use costs £3/$4 per reel (1.5m) and does the job perfectly without needing to add more flux, but I've seen in several NorthridgeFix videos where he adds fresh flux to wick pads and just wanted to know why, since I don't know of any time I've had to do that myself in the work I do

@NorthridgeFix 4 жыл бұрын

Flux helps with the flow of solder specially when dealing with solder inside holes. Wick by itself does not release flux and it's neither efficient nor practical to use it with out flux unless you are just wicking pads from the surface.

@TheCod3r 4 жыл бұрын

@@NorthridgeFix thanks for the answer, but I honestly never have an issue wicking without adding flux while using Gootwick

@NorthridgeFix 4 жыл бұрын

@@TheCod3r What is the point you are trying to make?. Just do whatever works for you

@BlueLionProject 3 жыл бұрын

Absolutely brilliant.

@sampathkumar2775 4 жыл бұрын

Super I love 💕 u r vedio s.

@julieyoung2 Жыл бұрын

I slowly took apart my ipad Pro 4th generation and replaced the charging port and now it will not charge at all. I am so frustrated. I work on this daily because I am an illustrator and now I am left with a brick of an ipad pro. I will say that before I replaced the port the old port was all messed up but would charge if at an angle or jiggled around, now nothing charges it. If anyone has any advice I would love to hear it and would appreciate any help! It's only 2 years old so this is extremely frustrating.

@johnmcdonald3231 Жыл бұрын

Can you recommend a iPad Pro 9.7 battery 1st gen? There are so many mixed reviews on batteries it’s hard to know what is good.

@tommy13t 3 жыл бұрын

Just curious, why do you have Big Boss take the boards out?

@ivanmendez303 4 жыл бұрын

Hi my iPod pro 11 inches, is black . When I connect is no charge, I don’t know what is de problem: cable and iPod is only 1 year and I used few times

@trejohnson1141 Жыл бұрын

What tester do you use? And what hot tweezers do you use?

@RelaxMusic2zero23 4 жыл бұрын

Hi #Boss happy Sunday n thanks for the video

@sibusisomadondo2789 4 жыл бұрын

That moment when you have fixed something..... Priceless

@eddraper 3 жыл бұрын

Very handy tip!

@whywouldyoucareaboutmyname6610 3 жыл бұрын

Can someone tell me what it means to "rip a pad"? I don't know much other than basic repairs but want to learn more, can't really find anything on google explaining what it is or what causes it..

@themaster3211234 4 жыл бұрын

If you’ve got time to answer a question I would appreciate it. I’m trying to remove the solder from a PS4 HDMI port. I have no problem doing this repair on an Xbox, but always trouble with a PlayStation. I’m adding low melt solder to the holes and allowing it to mix, but it doesn’t help with the removal. Do you have problems with the PlayStation HDMI port? Thanks

@leopisig508 4 жыл бұрын

easiest time of my life removing hdmi port bro. peace hehe

@NorthridgeFix 4 жыл бұрын

You took the first step by applying low melt solder. Make sure you are using a big solder tip to achieve more heat transfer for solder to mix well. Than all you need is a good wick that absorbs and Flux to help with the solder flow when it liquefies. Removing solder from PS4 holes is tricky, but having the right tools for the job and a lot of practice will make perfect. In the future, all unrelated questions should be posted here northridgefix.com/askus/

@Infiniti25 4 жыл бұрын

I don’t use low-melt solder, I add plenty of flux to the pins and then heat the board from the bottom on the back side of the port until i can lift it out with tweezers. It might be up to 2 mins depending on your hot air station and selected temp+airflow. Can mix this method with low-melt for faster results.

@mouhammadabbasi9548 3 жыл бұрын

قسما بالله صرلي بشوفك من فترة و بقول دمك عربي

@MominKhan-qx8zy 4 жыл бұрын

Big fan of you sir you are amazing..

@garbis101 2 жыл бұрын

Battery shows full but it’s not true how to reset 100% battery logo that’s y it’s not charging what is the solution

@londonguy2050 2 жыл бұрын

"You cannot live without oxygen and you cannot solder without Flux..." :-)

@Kris0725PL 4 жыл бұрын

hi master :) this tip with tweezer is great!

@AMazen-rw7le 4 жыл бұрын

Great job. Professional

@dantearcillas4328 3 жыл бұрын

Wath the problem ipad to ghost touch itry many tochscreen

@alfredrein699 3 жыл бұрын

Nice Video

@ashrafbashreef3523 3 жыл бұрын

that's great

@andikovaci21011987 3 жыл бұрын

Where is from Ismail?

@crisherrera5913 4 жыл бұрын

Hi, what temperature are you using on the hot tweezers? thanks...

@donnierobertson3088 4 жыл бұрын

Great job and video

@oneandonlytyler1 4 жыл бұрын

can you give us some names of your kit you use,like hot air soldering brand and endoscope brand ?

@sj55 4 жыл бұрын

Quality work 👍

@thomasjones4131 4 жыл бұрын

Do use indium solder wire?

@RaviYadav-nx7ft 4 жыл бұрын

Pls can you give me alternative solution for MOSFET 04180 , bcz I don't have it

@pukesey1 2 жыл бұрын

hello my idol !how much for you HDMI n LCD?

@shanebrookes1878 4 жыл бұрын

What’s the wick ya using!! Thank you 🙏

@NorthridgeFix 4 жыл бұрын

Premium Braid northridgefix.com/product/premium-desolder-braid-wick-10ft-length/

@kintag4459 4 жыл бұрын

good job

@jonathanjt6041 3 жыл бұрын

muchas gracias amigo me sirvió mucho :)

@dafidp 4 жыл бұрын

What your tool zoom component name,?

@gunnaralv 4 жыл бұрын

I want that wick!

@JohnnyJiuJitsu 2 жыл бұрын

I want to see big boss.

@Wheel333 4 жыл бұрын

Good job 🙏❤️🙏

@farooq.technology 4 жыл бұрын

Good sir

@ANS-51 3 жыл бұрын

Online class sir how much I fee?sir

@dougtaylor7724 4 жыл бұрын

What Hot Tweezers are you using please.

@hightttech 4 жыл бұрын

Probably WELLER WXMT or WXMT-MS. Many tip options sold separately. Really nice. Could be WMRT, but i think NF is a WX man.

@dougtaylor7724 4 жыл бұрын

Thank you. Those are pricey

@suryavanshib 4 жыл бұрын

Awesome ✌✌✌

@mohammedabdullah7826 4 жыл бұрын

عاشت ايدك

@NorthridgeFix 4 жыл бұрын

تسلم

@gerardogomezsalas1299 3 жыл бұрын

Do you have email, i have a xbox one s board with a mess in one of the mosfets, so came out half of it the other half is stuck in te board

@Lucky-jm5if 4 жыл бұрын

My iphone 7 plus always show accessories is not compatible and it cannot be charged but if I switch off the phone it will charge. Tried changing charging connector port but same problem. What seem to be a problem

@joesalgado 4 жыл бұрын

@Lucky have you tried a different power cord or power brick? Is it a none Apple cord/brick?

@Lucky-jm5if 4 жыл бұрын

Joe Salgado tried all original and non original charger same problem . Same cable was able to charge other iphone

@NorthridgeFix 4 жыл бұрын

Problem could be the Tristar chip, assuming you are using a good working original apple or MFI certified cable,

@Lucky-jm5if 4 жыл бұрын

NorthridgeFix yes i do have original cable bought along with the phone . Iphone do auto power on while charging . What i did, Plug the cable into phone , switch on the power ,incompatible warning, shutdown the phone. After 10-20mins when you switch on the phone the battery is getting some charge. Does tristar fault still can charge the phone????

@Riyaz-11 4 жыл бұрын

Yes we enjoyed the video 😁

@a_w_bukhari7579 4 жыл бұрын

Ahlan biismaeel :)

@drevestedt 4 жыл бұрын

There is no iPad Pro 9,7".

@ARNOLDFALCON 3 жыл бұрын

❤️❤️❤️❤️

@dwaipayanhalder7881 4 жыл бұрын

Man you have missed a bad diode just pause the video at 1:41 the left one

@NorthridgeFix 4 жыл бұрын

That's not a hole, it's just something stuck on the diode, otherwise we would have problems with the Backlight. Diodes usually crack and not have holes in them. I"ve done a alot of video where i show how diodes crack. Check this one kzfaq.info/get/bejne/b5x9Y7KI2rneZps.html

@Mobile206 3 жыл бұрын

I've a Samsung note 4 phone, bought in during launch used for few months, then something went wrong. I dunno software update or some else.... It's having the same problem, when I press power on, it shows Samsung logo & then restarts over & over showing only the logo. Took it to a shop, he said it's ok change the battery. He checked it on laptop what he called ' testing on machine', & ya I see it was working. Then went to buy the battery but it still won't turn on. The repair man has no clue,🤪🤪👻

@Ma_ziN 4 жыл бұрын

There’s No Go😢_😢od Flux in My Country “ Sudan “ , That’s Why My uncle from Mother side Gonna buy a lot from your website and Ship to Me .

@firasbirto 3 жыл бұрын

شكلك عربي الاصل

@edmarespinosa2924 3 жыл бұрын

Did you wearing a face mask when u using a flux or using a soldering lead? The smoke of flux and the soldering lead is bad for you health.....safety first man...