iPhone 12 Battery Replacement: A Detailed Guide to Avoid non-genuine Part Warning
Рет қаралды 40,653
9 ай бұрын📱 How to Replace an iPhone 12 Battery: A Step-by-Step Guide for Maximum Battery Capacity! ⚡
Welcome to a power-packed journey of iPhone maintenance! In this comprehensive video, we're diving deep into the world of iPhone 12 battery replacement. If you're eager to maximize your battery capacity and extend the life of your device, you're in for a treat. Join us as we take you through each step of this essential DIY process, empowering you to handle it like a pro. 💪
⚙️ In this expertly crafted tutorial, we'll walk you through:
🛠️ Essential tools and materials required for a successful iPhone 12 battery replacement.
📐 Step-by-step instructions to safely disassemble your iPhone 12.
🔋 Pro tips on preserving and enhancing battery capacity for optimal performance.
💎 Assembling your iPhone back to perfection with your new battery.
🌟 Expert insights to ensure you achieve maximum battery efficiency and longevity.
⚠️ Safety first! Remember that working with delicate electronics requires caution. If you're unsure, consider seeking professional assistance.
💡 Uncover the secrets of battery calibration, optimal battery health practices, and ways to make the most of your iPhone's battery potential. Whether you're a tech enthusiast or a beginner, this user-friendly guide is designed to cater to all levels of expertise. Get ready to revolutionize your iPhone experience! 🚀
🎬 Get ready to master the art of DIY battery replacement and equip yourself with the skills that'll empower you to breathe new life into your iPhone. It's not just a repair; it's a journey towards better battery life and top-notch device performance! 🌐
🛎️ Never miss out on our empowering tech content! Subscribe to our channel and hit the notification bell to stay updated with the latest tips, tutorials, and insights that'll transform the way you interact with your gadgets. Let's embark on this journey together! 🌈
If this video proves valuable in your battery replacement adventure, give it a thumbs up and share it with fellow iPhone users who could benefit from a battery boost. Let's spread the knowledge and make the most of our devices for years to come! ⚡
🔗 Stay connected with us:
Instagram:@iDoctorUK
Facebook: @iDoctorUK
Website: www.idoctoruk.com/
#iPhoneBatteryReplacement #DIYiPhoneRepair #MaximizeBatteryCapacity #iPhoneMaintenance #BatteryReplacementGuide #iPhoneTips #iPhoneHacks #BatteryHealth #DIYTechRepairs #iPhoneBatteryLife #TechEnthusiasts #TechTutorial #BatteryCare #iPhoneCommunity #TechDIY #iPhoneUpgrade #TechInsights #DeviceMaintenance #BatteryOptimization #iPhone12Battery #DIYTech #BatteryBoost #iPhoneRepairs #ExpertTechTips
@grahamgalbraith3027 26 күн бұрын
So you do not require the JCID programmer if you are using the pre programmed flex?
@MyFriendTheForest 9 ай бұрын
Like always you make this job so easier, i watch you on tiktok in the past but i'm glad that i found your youtube channel, keep up the good work!
@marccowen5076 4 ай бұрын
Hi there, just wanted to ask, what tag on flex do yo buy? cheers
@damiboydamzi6119 9 ай бұрын
So with the tagon flex I don't need the battery coding machine again?
@DucNguyen-hm6zc 8 ай бұрын
So good
@Genw-sh2ly Ай бұрын
Where do I buy these batteries?
@manojrajput4237 3 ай бұрын
so easy track
@danielzonozi2042 9 ай бұрын
So basically only one tag on flex is needed for all my repairs? Since I don’t need to leave it in the phone and can reuse it? Does the BMS then just restart and count down again as a new battery?
@iDoctorUK 9 ай бұрын
Yes! I keep a couple for each model but they are 100% removable and reusable
@danielzonozi2042 9 ай бұрын
@@iDoctorUK😮just seems odd that in any other repair they leave them. But that will reduce the cost of changing a battery significantly if it works without
@azgamingxyt658 5 ай бұрын
Watching from India ❤
@iDoctorUK 4 ай бұрын
Thank you brother ❤️
@duefourbail 2 ай бұрын
Will my battery hopefully come set up ready to just install instead of me having to solder and fix it myself?
@user-yw9uc1pw9d 15 күн бұрын
Without an important battery message, not anymore.
@danhills1524 4 ай бұрын
No need to use reprogramer like JCID? Just the tag on flex?
@scooterdoo1 Ай бұрын
You need to purchase a tag on flex that is pre-programmed for the iPhone you are using. You can re-use your existing tag on flex but will need to reprogram it to reset the battery cycles and health. The programmer can cost $100+ so a pre programmed tag on flex is the way to go for a personal diy replacement
@brianfong5711 4 ай бұрын
Apple why the hell did you make it so hard to replace an effin' battery. Learn from TV remote controls and add a gasket to make it waterproof.
@thefiestaguy8831 2 ай бұрын
I thought the whole point of soldering the BMS was to avoid the error message - why do you need the tag on flex to be connected first before removing it? I assume if you solder the BMS to the new battery, but don't add the tag on flex, it will still show error messages? I have the same Qian-Li tool and tried this process on an iPhone XS summer last year, accidentally broke the BMS board so ended up just putting in a third party battery since it's now not possible to get around the non-genuine battery warning.
@mechytechy412 8 күн бұрын
The tag on flex will trick the iphone into believing that its the phones actual battery and the phone will read that info from the battery and pair it with the motherboard. The tag on is supposed to link the iphone with the phones motherboard.
@alexshepherd 5 күн бұрын
@@mechytechy412 thank you, I'm a little confused as the BMS was swapped from the phone's original battery. Is the tag-on-flex capable of pairing a new battery BMS with the phone - in other words, is it unnecessary to swap the flex cable if the tag-on-flex is used? Cheers for your advice, very good video
@amaan1965 9 ай бұрын
Fan from India ❤🇮🇳
@iDoctorUK 9 ай бұрын
Thank you for your support 🙏
@tecforlyf Ай бұрын
need programmer to this just tag on flex will not show 100% bettery
@blackrepairs5978 2 ай бұрын
I have an iPhone that will keep showing the old data at 88%, I have tried connecting a different battery, rebooting and reconnecting the new battery with the transfered bms board again but to no avail. The new data won't show up whatever I do, have you come into this? I have done many replacements without issues with the same tag on. Thanks in advance for your reply
@zarifhilmy7479 Ай бұрын
for ios 17.4.1, you might need to restore battery health through 3utools. install the battery with flex to the board and connect the phone to the pc. if the battery in the 3utools showing 100%, you can reset battery health to 100%
@blackrepairs5978 Ай бұрын
@@zarifhilmy7479 Thanks for your response! It indeed shows 100% in 3utools, how do i reset the battery health to 100%? Can't seem to find any reset battery health option in 3utools
@zarifhilmy7479 Ай бұрын
@@blackrepairs5978 flash your device. go to - easy flash - quick flash - tick on restore battery health. ( this step will fully reset your device. should backup first. do this step with installed tag-on-flex. after process is done reboot your phone. check the battery health. once shown 100%, can remove the tag.
@zarifhilmy7479 Ай бұрын
go to easy flash - quick flash mode. tick on the fix battery health. this step will reset your device
@blackrepairs5978 Ай бұрын
@@zarifhilmy7479 Cheers man, found it. Is this problem only on 17.4.1 that you know? And is there a way without resetting the device, if a client were to come with a phone on the newest iOS at this point repairing with battery health showing at 100% would not be possible as the clients phone would lose the data..
@vasilis3204 Ай бұрын
Followed all steps but no luck. The old battery health is still present. iOS 17.4.1. Tag on flex v3.3. Does anyone found a solution on how to reset the cycles and battery health???
@muhammadzubair.1994 14 күн бұрын
You need to flash your phone.
@MysteryMan404 4 ай бұрын
Watching from Antarctica ♥️
@iDoctorUK 4 ай бұрын
Sick! How do you Get parts delivered over there?
@pigna6293 2 ай бұрын
Guardando dall'Italia
@iDoctorUK 2 ай бұрын
Ciao!
@manojrajput4237 3 ай бұрын
waching fron india nice video
@HeWhoPlays 3 ай бұрын
What is the ideal percentage of isopropyl alcohol to use?
@mudzzyhype5035 3 ай бұрын
I have heard 70% to clean the phone and 90-99.99% for removing leftover adhesive and that is what I currently use.
@Roxburns 3 ай бұрын
wait... wasn't the battery replaced from the back of the phone???? Mine back glass is broken i thought need to fix that before i change battery haha
@zakg60 3 ай бұрын
lmao i thouigt that too
@JaysIphoneRepairs 26 күн бұрын
100% battery health is much better.
@pontussamuelsson4003 2 күн бұрын
Watching from my phone
@suleimannasir 6 ай бұрын
Followed all the steps but didnt get 100% BH
@LIVE_FOR_TRUTH86 5 ай бұрын
No need worry may be he don’t show us battery circuit reprogrammed
@samirh8588 4 ай бұрын
@@LIVE_FOR_TRUTH86 Yes, you are right. He do not showi battery activation and battery board reprogramming for which you need aditionaly equipment.
@teddyquindayjr3999 4 ай бұрын
is that 70% alcohol? or 95%?
@iDoctorUK 4 ай бұрын
It’s actually 99.9%
@joelfranco4757 5 ай бұрын
But the battery already come with that conector
@iDoctorUK 5 ай бұрын
Most will unless you specifically buy it without the bms. The purpose of this video is to avoid the non-genuine part warning
@soloplayerid 3 ай бұрын
@@iDoctorUK thanks sensei
@ScoutSniper 3 ай бұрын
Thought you needed a special tool to program the battery
@Coopzzz360 3 ай бұрын
You needed a programmer for the previous tag on, these new tag ons are already pre-programmed so no programming required.
@pixeldome3d897 2 ай бұрын
where can i get new tag ones from? The ones that reprogram by itself?
@alanprzyszlak9580 9 ай бұрын
I did exactly same, step by step, and my condition isn’t 100. It’s 80% as it was before repair. Any ideas? I have used tag on 3,1 version if that’s important
@alanprzyszlak9580 9 ай бұрын
And I had no message about battery :/
@freshboypr 9 ай бұрын
Try put it in 99%
@alanprzyszlak9580 9 ай бұрын
@@freshboypr by using qianli device and software?
@Genw-sh2ly Ай бұрын
Where do I buy these batteries?
@Genw-sh2ly Ай бұрын
Where do I buy these batteries?
@Genw-sh2ly Ай бұрын
Where do I buy these batteries?
Hugh Jeffreys
Рет қаралды 4,1 МЛН
REWA Technology
Рет қаралды 193 М.
НОВОСТНИЧОК
Рет қаралды 16 МЛН
Official Mobile 10M
Рет қаралды 4,4 М.
Elekworld
Рет қаралды 136 М.