iPhone 14 Transparent Back Glass Mod.. Is it Possible?

Рет қаралды 551,262

Жыл бұрын

With the new iPhone 14 redesign comes new opportunities. Customizing devices is one of my favorite things to do, which is why I must find out whether it is possible to make the iPhone 14 back glass transparent. That's exactly what we explore in this video.
Thank you for watching!
Buy My BLUE Mat :a.co/d/h3iPG3i
Website( Mail-ins are currently closed) : www.phonerepairguru.com/
Second Channel: / @prgrepairtutorials2526
Ask a Question (Join the Subreddit): / phonerepairtalk
PROMO INQUIRIES: sean@prettygoodagents.com
Social:
Check us out on Instagram / phone.repairguru
Or on TikTok www.tiktok.com/@phonerepairgu...
Twitter: therealprg?lang=en
Facebook: / phonerepairguruu
My Repair Tools:
MAGSAFE MAGNETS : geni.us/BgyY
Tools and Organizer( iPhone Screen Stand/ iPad Screen Stand - Microsoldering tools etc) www.wrepair.com (Discount Code PRG5 for 5% Off Entire Store/ Discount Code PRG10 for 10% off $500+ orders)
Charging Hub With Amp Meter: amzn.to/3DzHecF
Qianli Screw Driver Holder: geni.us/QIANLIICUBE
Qianli Screw Drivers : geni.us/QIANLISCREWDRIVER
Display / Battery Programmer: geni.us/QIANLIPROGRAMMER
Tools Used (IFIXIT) : geni.us/JBYJF
Qianli Clamps: geni.us/QianliClamps
My Blue Repair Mat: a.co/d/h3iPG3i
Ifixit Starter Kit: geni.us/STARTERKIT
Phone Cooker (Heat Pad) : amzn.to/3OYQz06
Heat Gun: geni.us/HEATGUN
Electronic Screw DriverP: geni.us/WOWSTICK
Filming Gear:
LUMIX G85 geni.us/G85CAMERA
Lumix GH5 geni.us/PANASONICLUMIXGH5
Rode Wireless Go Mic geni.us/RHODEWIRELESSGO
Rode VideoMicro geni.us/RHODEMIC
Studio Lights geni.us/STUDIOLIGHTS
Spinning Thing geni.us/ROTATINGDISPLAYSTAND
Guru Approved:
Airpods Pro: amzn.to/3Qfel9l
Airpods: amzn.to/3Qmsn9n
Airpods Max: amzn.to/3QknnlB
Airtags: amzn.to/3bqKEmS
Easy Button geni.us/EASYBUTTON
Gameboy Case geni.us/GAMEBOYCASE
MagSafe Phone Cooler geni.us/jCfJoB
Nutella AirPod Case geni.us/PhUZC
Giant AirPod geni.us/GIANTAIRPOD
Nano Leaf Lights geni.us/xuKg
Anker MagSafe Charging Stand geni.us/ANKER
Phone Repair Guru assumes no liability for any damage caused to your phone as a result of any of the information contained in this video.
Do not attempt unless you are open to the possibility of further damaging your device.

Пікірлер: 581

@PhoneRepairGuru Жыл бұрын

Next videos out now: kzfaq.info/get/bejne/gLWErdJ9uMq2oXU.html

@Goku-wl8nc Жыл бұрын

Can't wait!!!

@andrewosullivan8992 Жыл бұрын

YESSS!! Love long videos!

@sebastiantorres7299 Жыл бұрын

@NDPugman Жыл бұрын

Yes

@coronachan8888 Жыл бұрын

Happy Thanksgiving 😁

@carcar5479 Жыл бұрын

As an ex phone repair tech, I love watching these. You make it seem way easier than it is and I love it lol.

@PhoneRepairGuru Жыл бұрын

😂❤️

@thoughtfullAI355 Жыл бұрын

Haha😊

@yunjerms7487 Жыл бұрын

Ya I loved fixing tech and reassembling the tech I took apart

@grammarpolice8909 Жыл бұрын

Finally, someone that knows when to use a full stop & when to use a comma.

@potatoman9116 Жыл бұрын

@@PhoneRepairGuru hello i changed my iphone 11 pro max motherboard and now there is a message about battery and the screen it saying they are not genuine (they are) how to stop the message??

@haydenk_22 Жыл бұрын

I love these types of videos where you mod and customize phones. Keep it up 👍

@PhoneRepairGuru Жыл бұрын

More to come!

@bestie_and_me. Жыл бұрын

i ruined ur 69 likes - well now it has 90

@potatoman9116 Жыл бұрын

@@PhoneRepairGuru hello i changed my iphone 11 pro max motherboard and now there is a message about battery and the screen it saying they are not genuine (they are) how to stop the message?

@P0LAR07 Жыл бұрын

@@potatoman9116 they arent coded to your phone, they are registered with the old motherboard so the new one is looking for parts with a seperate serial number

@potatoman9116 Жыл бұрын

@@P0LAR07 thank you for the help!

@Vostok7 Жыл бұрын

Nothing will beat modding the iPhone 4. Back glass used to be super easy to swap and there were tons of options available out of China. Good times.

@Adrian_Ruiz508 Жыл бұрын

Love watching these type of videos. I enjoy getting to learn more about phones.

@EmergencyPhoneRepair Жыл бұрын

Nice video! A personal favorite technique I like to use when removing any flex cables held down with adhesive is a heat pad with combination of isopropyl alcohol.

@govind_goyal Жыл бұрын

phone customisation is the best, love these. can't wait for part 2.

@Darktacomic Жыл бұрын

Great video can’t wait for part two I am super happy to see this channel growing I have been watching for while and am glad this is going well for you

@Daboiiisquad Жыл бұрын

Your videos are unique and have taught me a lot so far. Keep making these videos.

@dimitrischristou Жыл бұрын

Love the dedication!

@Mohityadav-ll1xu Жыл бұрын

Hats off to your efforts man❤️ you are the best❤️ I love watching your shorts and the videos and trust me I am seeking for so much more videos on this and waiting for the part 2 And you have become the inspiration for me to rebuild my iPhone 5S on my own..

@AnimeKat8849 Жыл бұрын

I'm Sacrificing my data to watch this and I have no regrets, I absolutely love your vidoes and the way you talk and joke around, it's very relaxing, fun and hilarious. Also I immediately like after opening the video you absolutely deserve it, and I watch the whole adds and don't skip at all.

@PhoneRepairGuru Жыл бұрын

Thank you so much ❤️

@dennisriggins4603 Жыл бұрын

Your videos have really encouraged me to disassemble a iphone I'm getting a Penelope screw driver set on Tuesday that you for you videos they are amazing im disassembling my moms old iPhone soon thank you for the inspiration I do need a pry tool however I'm getting one soon modt likely if not I can use a substitute

@jonatanhelgeland8360 Жыл бұрын

Appreciate the hard work, I love your videos

@fmburner Жыл бұрын

Finally someone on KZfaq with ithor drivers!! 🙌

@kemaribennett3970 Жыл бұрын

Happy thanks giving

@sparespartan720 Жыл бұрын

To remove the camera bumps use your soldering iron to melt the weld.

@KnightTamila Жыл бұрын

Do you think 100w is enough to melt a weld , ofc nope

@LeeMooEez Жыл бұрын

@@KnightTamilahe don’t even know what he just said and pretend to be smart and thought it just a lead solder and not a spot(laser?) weld LOL

@KnightTamila Жыл бұрын

@@LeeMooEez weld is different than soldering

@KnightTamila Жыл бұрын

Weld requires a extreme temperatures like 300°c , if you're not similar with them I'll explain They are small metals fixed between two metals, they are quickly heated and fixed by a semi electric gas firer, these are common in southern asian countries and others only seen in factories

@KnightTamila Жыл бұрын

@@LeeMooEez and yeah melting them removes the camera bumb but it may crack the glass

@mjcommunications Жыл бұрын

Great video! As always 🤗

@Justinzac100 Жыл бұрын

Wow! You didn't let the back glass break and pryed off so much. Great Job!

@yassinsharawi6858 Жыл бұрын

Thanks for your hard work

@skit_aep Жыл бұрын

Very cool, Keep up the the good work, Guru.

@goldeneyegamer2506 Жыл бұрын

You literally taught me how to repair iphone I literally repaired my own iphone 13 pro with tools problem was not too big just to change the display But thank you you helped me 😊😊

@miskiov Жыл бұрын

I love it when there is a full video

@_DreamzGaming Жыл бұрын

Waiting for this since the sneek peek 🤩

@devv222 Жыл бұрын

The effort is crazy, i could never

@Moh_432 Жыл бұрын

Appreciate your hard work👍

@jtechgadgets Жыл бұрын

THIS IS HARD WORK. GOD BLESS

@NoobKillU Жыл бұрын

I love this guy, if I ever need a repair I'll come to him.

@Goigigandfriends Жыл бұрын

The problem a lot of people don’t realize about these glass mods and maybe this will help you buddy is it a film most of the time it’s not painted you need to get the film off. It’ll be a lot easier. If you can get under the corner what I have found works for me is the cut at a 45° angle at the corner and scrape backwards towards outside. This will cut off the corner film and then you can have something to grab onto. You will still need to get under the peace with a razor blade but once you’ve done that you should be able to pedal most of it off in one piece, I find spraying, icy propyl under the plastic helps loosen the glue. Source: I was the first in the world to do the back glass mod on the note 5 and galaxy s6 and it was my specialty for years

@Goigigandfriends Жыл бұрын

@@E-hab i’m not entirely sure either I haven’t tried with an iPhone in so long lol are used to do digitizers and sometimes I did have films. The film is so thin when you scratch the paint off it doesn’t look like it’s there and it’s very hard to scratch it could be there. That’s why it’s more of a possibility really hard to paint glass so they find it easier to paint the plastic. Could be wrong!

@techtimei6091 11 ай бұрын

I love these types of videos👌👌😍😍 Follow you from EGYPT 👌👌

@Coolguy_2266 Жыл бұрын

I love your videos❤️ keep it up👍🏻

@mdsadik1661 Жыл бұрын

Awesome video Bhaijaan ☺️😎🔥

@DReEsE_26 Жыл бұрын

Love your videos 👍

@damy100 Жыл бұрын

Your videos are fun I love em😁

@iexplore11 Жыл бұрын

Love your videos

@Foreverylike Жыл бұрын

WOW you did it!

@gamecuber6 Жыл бұрын

that actually looks amazing

@zaithwankata1284 Жыл бұрын

Your videos make my day man.... Keep em coming 😀😁

@PhoneRepairGuru Жыл бұрын

Thanks! Will do!

@MrMorfix1 Жыл бұрын

Good Job bro,.. love from Ghana 🇬🇭

@Metoostore282 8 ай бұрын

Thank you

@tinman9341 Жыл бұрын

Thanks for sharing your tips, tricks and insights. As a repairman, it’s very insightful. One quick question: could the laser adhesive remover machine work for the back glass? Keep up the great work!!!

@PhoneRepairGuru Жыл бұрын

Im worried it would cause burn marks

@rushilkisoon Жыл бұрын

@@PhoneRepairGuru but glass doesnt burn? So it would help remove the paint and the glue along with the metal frame (apart from the welded camera bezels).

@msnirajagrawal Жыл бұрын

If we lower the laser power, it won't burn the glass. Also, the low power laser will not completely destroy the glue but definitely loosen it well enough.

@HAKANKOKCU Жыл бұрын

@@rushilkisoon it does burn for a bit

@hammad03 Жыл бұрын

About to sleep and you just posted a video Thats something awesome 🔥🔥

@PhoneRepairGuru Жыл бұрын

Hope you enjoyed it!

@hammad03 Жыл бұрын

@@PhoneRepairGuru Thats never a question.. I do enjoy all of your videos. They all are pretty good.. Waiting for part 2👍🏻

@Hockeygod17125 10 ай бұрын

Best videos ever you inspire me to do this and I make some cash 💵 now

@miskiov Жыл бұрын

I am very excited for part 2

@creativeworkers4695 Жыл бұрын

Every thing is possible when comes to PRG 🔥

@khalinrao6089 Жыл бұрын

keep up what u are doing phoner repair guru saving devices from landfill

@noriceformeplz Жыл бұрын

I done this to an Galaxy S6 yearssss ago. It was so easy to do compared to this lol. I got compliments on the phone all the time people like the clear mod.

@harshbhamre5087 Жыл бұрын

Your videos are great . Make more of such videos which have longer duration rather than shorts .

@Thatcypriomapper 11 ай бұрын

Same iw ant both😊l

@PotatoChipsDAD Жыл бұрын

love the videos keep up the good work :D

@PhoneRepairGuru Жыл бұрын

Thanks, will do!

@saadshaikh6401 Жыл бұрын

I love you content dude appreciate ❤❤❤❤ love from Mumbai India

@TeamAI. Жыл бұрын

i love these long videos, We need more please

@PhoneRepairGuru Жыл бұрын

Yessir, thanks for always commenting and tuning in

@TeamAI. Жыл бұрын

@@PhoneRepairGuru np, your doing a lot by making these videos, tuning in is the least i can do

@fabiolatibiyane616 Жыл бұрын

Love this vids just show us how to flash phones

@chaosofagoose Жыл бұрын

Can you do a video explaining how the surface Pro hinge works?

@kakashisensei9789 Жыл бұрын

I love you and your content ❤❤❤❤

@Mikk007 Жыл бұрын

PRG u can use a mini cutter made by reva to cut the metal bracket.

@Apollo_75000 Жыл бұрын

hey prg I freaking love your videos

@PhoneRepairGuru Жыл бұрын

@Apollo_75000 Жыл бұрын

@@PhoneRepairGuru happy thank s giving

@akmystrios2494 Жыл бұрын

take your time I know how hard it is for you to make these videos + see you next week

@rickykerno2928 Жыл бұрын

the camera ring is not glued,but it's like one piece wit the plate so you have to cut the plate i watched a video doing this mod before on iphone 14

@Thegamingplay281 Жыл бұрын

hi, this is great things!🙂

@AgeraViper 8 ай бұрын

Jimmy is a life saver

@sherrjo Жыл бұрын

Great video skipped throught it but leaving a comment and thumb as it's good attempt

@abidashhar8627 Жыл бұрын

To Be a Continued… keep up the good work 👍🏻

@Sushi_219 Жыл бұрын

It would be so cool to see a all clear phone showing all components on the sides and back , and then just a fully bezeless screen up front. even the buttons would be clear.

@GO192-YT Жыл бұрын

I try my best to watch you because you are so interesting

@tanaymathure3144 Жыл бұрын

Man i really appreciate this but will using alcohol help for the removal Really excited for part 2 Keep up the good work Lots of love and best wishes

@sorenakhiabani2501 Жыл бұрын

Love the music

@NMR Жыл бұрын

Try to use thinner for paint removal It may work

@foneguy Жыл бұрын

try using the lazer machine to loosen the adhesive for the metal brackets on the back glass

@Naail05 Жыл бұрын

Now he got a setup nice..

@Matyas_Ceo_Of_Matyas Жыл бұрын

You took a look at the samsung galaxy beam quite some time ago, you should also check out the beam 2 and compare the projectors

@mahdinaghizadeh9462 Жыл бұрын

Your videos r the most asmr non asmr videos on yt.

@Christosq2 8 ай бұрын

Love for Cyprus🇨🇾

@___joez Жыл бұрын

Get that crunch

@sebastiantorres7299 Жыл бұрын

Nice Video

@akihirosantos881 Жыл бұрын

hi im a fan and its satisfying even though i cannot afford to buy and owned an i phone 🥺🥺 i wish i could have one for my moms birthday since shes using old phone

@MrLevelcapGaming Жыл бұрын

Thanks for your comment you have been selected for a prize dm me above👆 to claim.

@BotVR6310 4 ай бұрын

I would love to do that mod to my iPhone

@kristinalime Жыл бұрын

yeah i had enough of yt and costum phones. Gonna go take a first sleep in 2 weeks. Also prg great video

@timon_don Жыл бұрын

Anyway love your video's

@draginator6 Жыл бұрын

Damn, hate a part 2 when you are early to a video and it's not already out yet hah

@garettboothe4653 Жыл бұрын

Quick suggestion, lower angles with razor blades mean better scrapes and reduces chances of scratches!!

@arsenalgameplay7532 Жыл бұрын

This is dope

@FranklinClinton1 Жыл бұрын

Nice Video 😉 whats about Samsung? S10 or later since im a Samsung (Android) user.

@arkadebnath9585 Жыл бұрын

Please make part 2🥰🥰

@alexanderzawydiwski9534 11 ай бұрын

I just did this today to my iPhone 4s

@kidsonblackops Жыл бұрын

(I don’t mean this as criticism) Is there any good way to deal with these besides a blue light separation machine and a file that probably doesn’t exist rn?

@TommyMv1204 Жыл бұрын

Maybe but must watch!

@Killert68i Жыл бұрын

Looks like it is much easier to buy separately third party glass, or use laser machine

@haggielady Жыл бұрын

Happy Thanksgiving to everyone.

@Vewy_tiny Жыл бұрын

I have a question, ok so I have the XR and the back glass is like totaled and I was wanting to change the color of it just the back glass is that possible and is it possible for me to put it in a 11 housing

@onimus93 Жыл бұрын

you didnt have the holes on the vaccume aligned with the silicon mat on the delamination machine, which means it wasnt really holding the phone down. Probably wasn't great for the heat tranfer either.