iPhone 6 FPC Connector replacement

Рет қаралды 71,783

5 жыл бұрын

Today we ll present the fpc connector replacement on iPhone 6, the complete process that we ve done for our client.
Repair iPhone how to change the FPC connector. This tutorial serves for any iPhone. It is a bit complicated process and needs some attention & tools & experience.
You have to be careful when you soldering the connector and do not apply too much heat. We can use tin paste to not raise the temperature too much.
MovilOne is not responsible for any damages that may occur during the repair due to missing tools or insufficient experience.
Comments and questions regarding this repair are always welcome :)

Пікірлер: 68

@MovilonePhoneRepair 3 жыл бұрын

*✅ Become an EXPERT👉👉* movilone.eu

@mattiashammargard9857 Жыл бұрын

You make it look easy. Respect!

@serdarxxx1073 3 жыл бұрын

This is absolutly professional. Respect 👍👍

@MovilonePhoneRepair 3 жыл бұрын

Thank you, Serdar xxx! Best regards

@markorchin3283 3 жыл бұрын

Hi - great work. Do you put solder on the legs of the fpc connector before setting it in place on the mother board?

@Gamechangerr667 5 жыл бұрын

This guy is a genius!

@MovilonePhoneRepair 5 жыл бұрын

Teamometeamo, thank you for your comment! Best regards

@kentowen7928 2 жыл бұрын

this is such a great video anyways let me ask? is that what u replaced is a fpc touch on board?

@sanjusharma9556 2 жыл бұрын

Amazing sir..... ❤️ Microscope konsa use kya ha sir

@loyalty786 Жыл бұрын

Hi thank you for sharing useful content, Do you have a link for your services ?

@shahbantirur4973 2 жыл бұрын

Thank you

@Akshay9mm 3 жыл бұрын

Very clean work 😘

@MovilonePhoneRepair 3 жыл бұрын

Thank you, Yarr for your appreciation. best regards

@user-dr2vm2cr4g 9 ай бұрын

Well done sir

@BICHPHUONGVO7475 4 жыл бұрын

Great will practice

@MovilonePhoneRepair 4 жыл бұрын

GYPSY HOBO alright! If you need more information, please let me know! Best regards

@dicksonm5460 2 жыл бұрын

A'm learning a lot as a upcoming technician

@erickcastillo1395 5 жыл бұрын

Gracias buen tip amigo. 🤠👍🏻

@MovilonePhoneRepair 5 жыл бұрын

Gracias, Eric por tu comentario y por visionar este tutorial! Un saludo cordial

@janarmani5972 3 жыл бұрын

Hi which one Aircon machine are you using because it is more better and for plastic

@shahjalalsowpon8052 4 жыл бұрын

Thank you so much M♥Vil One.....Very Good idea.... I like BD🇧🇩

@MovilonePhoneRepair 4 жыл бұрын

shahjalal sowpon ❤️thank you too for your comment! Best regards

@tommu8471 3 жыл бұрын

good , professional

@MovilonePhoneRepair 3 жыл бұрын

Thank you :) Best regards

@duncan.g.burton 3 жыл бұрын

Hi, great tutorial. What heat tape do you use at the beginning ? Thank you

@yusufoylum7148 2 жыл бұрын

kapton tape.

@statuswala45852 3 жыл бұрын

Sir mere i phone 6 ka fpc conecter tut gya h repair ho sakta h ya nhi or hoga bhi to kya cost aayege plz reply me sir thank you

@johnreimer4008 5 жыл бұрын

What are all the ingredients you beed to solder

@tymflasher 3 жыл бұрын

Nice video.,,,

@MovilonePhoneRepair 3 жыл бұрын

Thank you very much for watching this tutorial! Best regards

@ZEESHANSIALKOTI 2 жыл бұрын

HI DEAR YOU WORK LIKE CHARMING WICH SOLDERING WIRE YOU ARE USING PLEASE REPLY

@bmwmpower1491 3 жыл бұрын

Great Job, but is really difficult to understand temperature. Possible to write?? Regards

@Vidya1939 2 жыл бұрын

Good & tks

@MovilonePhoneRepair 2 жыл бұрын

Thank you too for watching! Best regards

@buatngetes3219 3 жыл бұрын

Perfect tutorial. What tipe hot air you used?

@MovilonePhoneRepair 3 жыл бұрын

300 celsius degrees with 50 of air.

@Senior. 3 жыл бұрын

*Hi.* Where to buy rear camera connector FPC 37pin (20+17 pins)??? Do you have to sell?? Looking for it over a year :( Or I will buy damaged Xiaomi Mi5 motherboard with good connector!!

@mouscoolgbane6621 5 жыл бұрын

perfecto ! thanks mister , pls what is name past flux you was use ?

@MovilonePhoneRepair 5 жыл бұрын

Hello, Mouscool! I m using Amtech and i recommend it! Thank you for watching!

@mouscoolgbane6621 5 жыл бұрын

@@MovilonePhoneRepair thanks Mister , we want more vidéo from everyday Thk

@rommysurya 3 жыл бұрын

Apka shop kaha par hai

@altamashalam6768 2 жыл бұрын

wich smd use ?

@arcostek9867 2 жыл бұрын

How much does it cost for iPhone 11 repair?

@sanjusharma9556 2 жыл бұрын

Is advance Microscope ? Which company?

@edwardmabilar4077 Жыл бұрын

what tape sir? name of tape?

@leftblank6036 3 жыл бұрын

why does the solder go right onto those contacts? looks like it just goes right into the right places?

@ParodieHecker-mobile 3 жыл бұрын

That's why you use flux.

@beenasrivastav2351 4 жыл бұрын

I have same problem but in OnePlus 5 can we solve this problem with same method

@MovilonePhoneRepair 3 жыл бұрын

Yes, you might try. You need some special tools and a little bit of experience :) Good luck!

@yellowboy258 4 жыл бұрын

can u use no clean flux to do this?

@Echo-ie1bt 3 жыл бұрын

The one he used is probably technically a no-clean flux. It's still a bad idea to leave it on the board because it can interact with components and impact board function, but in terms of the flux itself, any caustic material is burned off or trapped in a 'shell' when the flux cools after being heated. If you're referring to the liquid no clean flux, I would not recommend it. Those ones burn off very fast when using hot air, removing the purpose of adding it.

@kangpaidi8567 4 жыл бұрын

What was the fault of this connector? no charging, no 5volt, or bad soldering?

@MovilonePhoneRepair 3 жыл бұрын

Hello, Paidi!It is the connector of the motherboard, responsible for transmitting the image to the screen. But the tutorial can be used for any fpc

@einfachdemian9498 3 жыл бұрын

Can you tell me, what i bought for this please?

@MovilonePhoneRepair 3 жыл бұрын

You can try on AliExpress. Best regards

@johny1220 3 жыл бұрын

Goddamn you guys made this look so easy, I tried and just couldn’t get it to work unfortunately, I’ll just stick to soldering slightly bigger components lol.. 😂😭

@JSIXTO-tv5yd 2 жыл бұрын

What microscope used

@MovilonePhoneRepair 2 жыл бұрын

Amscope 90x. Best regards

@diyandassembling2907 2 жыл бұрын

I have replaced the battery from a local shop. After battery replacement. The phone was working for 10 days. Suddenly the display is just blank. Iphone gets detected in iTunes. It also detects the SIM card .But display is just blank.Data is very important for me .kindly help me to rectify this problem.I can ship this device to your place.

@MovilonePhoneRepair 2 жыл бұрын

Hello,DIY AND ASSEMBLING ! You should try with another screen, first! Best regards