Thank you Chelsea, glad it helped you! We try to make our tutorials concise and "straight to the point" with voice-over for every necessary action.

Great to hear!

Michelle P where did u find that page🤪🤩👍🏽

I’m about to do my first 6s screen replacement for my oldest daughter to play on safely with out getting cut by glass. Any tips or recommendations? Is it easier then I expect it to be? I feel confident!

Thank you! Hope your repair went well :D

If i have a iphone 6 a iphone 6s sccren that cant work yes or no

Same with mine - no amount of force would get any of those 6 screws on the sides to budge. I just cut those six screws on the sides of the assembly off with wire cutters. Followed everything else and the phone works great.

Cool! The feeling of accomplishment when the device you're working on turns on and functions properly - priceless!

Thanks, will do!

U have to remove a little rubber on the new screen m8

For some reason my front facing camera isn't pciking up. Any ideas. I feel I put it in correctly.

Glad it helped

You would have to drill them out if they are stripped. Or get a better screwdriver if the screw heads are still catching.

Ribbons, as in connections at the top? 1 is LCD another is Touch - that's what most replacement parts come with. 3rd is camera - it is transferred during repair. 2:00

Hey man the 3rd ribbon is the camera go ahead and switch it over. And if by any reason you guys damage anything is if you aren't fragile with the ribbons I'm currently sol cause a ribbon was forced back in causing damage to the internal piece. Also the parts online are super cheap I broke my button ribbon in the process and had to replace.

Yes, you can test it with film... but the store's policy may not be enforceable in many jurisdictions around the world. If you used a credit card or PayPal to make a purchase they may be able to void the payment in-case the item isn't working and the merchant isn't accommodating you.

Rana Batshone Mines Either I did everything right,,But When Ii Tried To Remove To six screws ii couldnt😩😩😩 So Ii Had To Replace Everything Back 🤦🏾‍♀️

Its better to disconnect the battery. Its not mandatory, but it helps to prevent any connector mishaps. A short can happen when plugging in the connector if its misaligned. The short can affect the back-light and other peripherals. If your phone's new screen is dark, you can try shining alight through it and if there is an image, but no back-light, then you know your back-light power supply is down. Unfortunately that would require low level component repair or a logic board replacement.

You might have to use your old home button and the camera, but you can try.

Peter Kaufinger hello. I think this is late but I did the same thing. But my screen is completely dim. I can’t even seen the screen.

You could drill out the screw caps.

Maybe, but how will you sleep at night knowing that you have a removable protective film still inside your phone?

it's the digitizer

I've repaired an iPhone with a broken sim tray on a plane once, using an earring.

Its not typical, no. Most screws even have paint to prevent vibration induced unscrewing.

It'll depend on the type of replacement display you get. Since the phone is rather old and not a lot of people are willing to pay Apple hardware prices, most replacement LCDs available for it today would at-best have 3D touch simulation - not actually working, but the OS will think that it is. You'd have to get a refurbished Apple genuine display to get it truly working.

open the screen remove the battery then continue

The KZfaq is a deep mysterious place, All things considered, Neon green gloves are required.

Also looks like it’s melting