IQON 68mm Anti vs 55mm UC Flat THEM Street Frames

IQON 68mm Anti vs 55mm UC Flat THEM Street Frames - JAD Rollerblading

Рет қаралды 9,622

2 жыл бұрын

Hello again! Sooo I decided to try 68mm IQON 88a wheels on THEM Street Frames setup anti rocker.
Also I tried Undercover 55mm 92a flat setup on THEM Street frames.
Both are incredibly fast and roll super good.
I have them both setup with Rollerblade ILQ-9 TwinCam Pro bearings.
It was super hard for me to decide which setup I would prefer more. They are both really fun.
Which setup would you prefer???
Sonic 7-in-1 Skate Tool (teal): Pro Tool+H:
oakcityskate.com/products/son...
Undercover Wheels:
oakcityskate.com/search?page=...
Moooopi 909:
oakcityskate.com/products/the...
IQON Wheels:
oakcityskate.com/search?q=iqon
Aggressive Inline Bearings:
oakcityskate.com/search?q=bea...
Them Pat Ridder Pro Skate:
oakcityskate.com/products/the...
Kekoah Straps
oakcityskate.com/search?q=kekoah
More THEM goodies:
oakcityskate.com/search?q=them
Ground Control Featherlite 3 (white):
oakcityskate.com/products/gro...
Rollerblade Twincam Ilq-9 Pro Bearings:
www.amazon.com/Rollerblade-Tw...

Пікірлер: 46

@icemanbtlr25 Жыл бұрын

The secret to getting the middle wheels out or on with kizer fluid 5 frames is taking the outside wheels out first when taking them out, putting them on you out the inside wheels in first because you can expand the frames to get the inside wheels in and out easier with this method.

@AggressiveInlineDiary 2 жыл бұрын

Good video!!💯 I also had my first session with the 909 yesterday. had the FLT3 frame on it but think I'll test the Them street frame anti rocker the next session times. Stay tuned your videos are really good!💪👍

@bonter1983 Жыл бұрын

Great video. Good insights and detailed coverage.

@mr.rodriguez5099 2 жыл бұрын

Thank you for the video! You saved me from buying just today some 64mm pure urethane wheels! I bought some with the enlarged plastic core instead. Thanks 👍

@allestic 2 жыл бұрын

Thought the them street frames only fit 58mm max so this review explained a lot thank you. Keep it up!

@CharacterConcept 2 жыл бұрын

man this is a top quality video. Keep it up ! from Australia.

@antonvrieling2718 2 жыл бұрын

Man, i was literally about to go out, and make a video, about trying to skate flat, after skating anti, for the past 20 years. Great video, loving the content. Keep them vids coming.

@jadrollervlog 2 жыл бұрын

Hahahaha do it! I would love to hear your thoughts!!!!

@antonvrieling2718 2 жыл бұрын

@@jadrollervlog well, i uploaded the video... been a while since i uploaded anything to youtube. I honestly was pleasantly surprised. I was expecting there to be a lot more wheel bite.

@bladeworks5012 2 жыл бұрын

68mm antirocker is way to go bro! My current setup, it feels good and helps a lot while getting around, thinking of trying fluid V with 58mm or 60mm though, I know it is hard to push inside middle wheels, it is the same with fluid IV but after a few attempts frames get used to it, so no problem at all Let's GOOOOOOO

@BrettMitchell82 2 жыл бұрын

I just put the teal Red Eye 55/92 wheels in my Fluid Vs and shared a similar experience my first time on them. Found them very fast and was surprised how stable they were when rolling straight and on the flat portion of the profile. Love the feeling of a shorter wheel base when accelerating and carving, too.

@jadrollervlog 2 жыл бұрын

Yup!!!!! Small wheels are SUPER fun!

@inkflo Жыл бұрын

By any chance have you tried rolling the red eyes 55mm in an antirocker setup? If so, what's your thoughts on only rolling two small wheels vs 4?

@bladeshred01 7 ай бұрын

good thing most aluminum wheels are sold with abec 9s installed now

@OrganicGonzalez Жыл бұрын

Quick question about the intuition liner in the Pat ridder skate. Is is worth buying boot only for the intuition liner ?

@Purpleshank 2 жыл бұрын

I like this video format! Do those 68 wheels touch the soul when you do a toe roll? I got some bigger wheels on my Blanks and it looked like they had that tiny bit of clearance as well but they act like a brake when I toe roll and I'm a light dude. Could it be that the Thems are a lot more solid in the soul/boot area?

@jadrollervlog 2 жыл бұрын

Not for me. I weigh about 154 lb. I stepped in the mud at one point though and it was scraping on some of the mud buildup underneath the wheel but that's about it and it was barely scraping. The wheel tip is wearing down a little bit now so there's more clearance. As for the blanks hmmm not too sure. Maybe the frame? Or maybe the wheel. I assume it's not the wheel. Usually it squishes on the bottom and that shouldn't affect the top. I think it has something about the soul frame combination that you have.

@Rene_Dillon 2 жыл бұрын

Great video, on the flat set up were those ceramic bearings?.. i think im riding the same ones in my oysi frames

@jadrollervlog 2 жыл бұрын

Noooo these are Rollerblade ILQ-9 Twin Cam pro. I have always wanted to try bones Swiss ceramic!

@davequist7710 2 жыл бұрын

I’ve been using the Mushroom Blading 58mm face profile flat on the Them frames. It’s really comfortable and the urethane seems high quality. I only skate park so it’s almost perfect.

@jadrollervlog 2 жыл бұрын

Okay I need to give this a go soon! I love THEM frames a lot! Thank you for the tip!!!

@chinobean3555 11 күн бұрын

have u tried 50/50 balance frames? im about to order some kinda wanna hear from spmeone who tried the first. back in the day i used to have like every non ufs 50/50 frames loved em then i hope i love the ufs version

@itzdillydork2502 2 жыл бұрын

I skate the GC 64mm constellations antirocker with fluid IV and I love the big wheel anti rocker setup. I want to try 68s but I already had to dermal to make the 64s fit lol. ( Gawds Tim Frankins)

@angelcortez2878 2 жыл бұрын

So you prefer the anti rocker Them street frame over the FTL3 for anti rocker setups?

@fadhilahrizky9515 Жыл бұрын

i can't fit the 62mm wheel, did you mod the on them street frame so it fit's the 68mm wheels?

@inkflo Жыл бұрын

Has anyone tried rolling 55mm on an antirocker setup? I'm wondering if its possible to save a few bucks or if I would need to put all four down on the ground to get rolling.

@ThatShaunBoy 2 жыл бұрын

I really wanted to skate the Fluid V's but I had the same issue with the middle wheels. I broke 4 pairs of bearings and just gave up on them. Maybe I'll try again at some point with cheap bearings

@jadrollervlog 2 жыл бұрын

Could be the inner bearing spacer too. But yeah I hope they address that someday.

@ThatShaunBoy 2 жыл бұрын

@@jadrollervlog could be! Never had any issues like that before. Like you said, even oysi frames were easier and they were horrible hah

@jadrollervlog 2 жыл бұрын

@@ThatShaunBoy man I'm so glad in not the only one that found that incredibly frustrating! Thank you my friend!!!!

@chilli-iceolive-abode2447 2 жыл бұрын

👀

@k.dtrying2229 2 жыл бұрын

I'm riding the 54 mm 88a eulogy flat on m12 lo .. and fith element 55mm 92a ground control mids with usd 55mm 90a front n back.. and usd sawy 58mm 89a m12 roces front n back and usd 57 88amids. And m12 lo 54mm 88a eulogy front and back and eulogy 47mm 101a antirocker. I'm bigger on flat than antirocker. Flow better with flat. But I only have a month and a half in on aggressive inline.

@jadrollervlog 2 жыл бұрын

WOW EULOGY WHEELS!!! Those were my favorite! Undercover wheels are amazing if you can find your size. Thats awesome !

@1MinuteFlipDoc 2 жыл бұрын

where'd u get the 54mm wheels? rollerwarehouse?

@k.dtrying2229 2 жыл бұрын

I got them on Amazon, eulogys..not too shabby. 54mm 88a.. wore them down kinda quick I skate on rough concrete. Ive gotten a few items from rollerwarehouse . And quite a bit from oakcityskate.

@marcfreshart 2 жыл бұрын

Anti with bigger wheels 👍.

@climbtheskyspine5748 2 жыл бұрын

Hhahahahaha!! Whoooowh!!

@alexstewart4045 2 жыл бұрын

Bearing press for metal core wheels.

@jadrollervlog 2 жыл бұрын

To be fair I've never tried that but after trying these 68s with the plastic hub not sure I need to.

@jadrollervlog 2 жыл бұрын

Recommendations on a good bearing press? Can you also get them out easily with the bearing press?

@TheFistlist 2 жыл бұрын

New Britain CT here. I enjoyed the vid. Leave me a comment or send a message if you want to go skate some time.

@glooms691 2 жыл бұрын

woah I thought the them frames only went up to 58mm !

@glooms691 2 жыл бұрын

you think 60 mm moonshine wheels would fit just fine?

@jadrollervlog 2 жыл бұрын

If you are using medium V2 soul plates and large THEM Frames you can get away with 68 mm wheels with the bullet profule. But only on the outer wheels not the inner. Yes you can fit 60s on the outer wheels. 58mm is the biggest that will fit on the inner wheels.

@brianmaller3443 2 жыл бұрын

58mm (bullet profile) flat on them frames will have less wheel bite than the 55mm undercover..You prob know that anyway ha...50/50 and Mushroom blading makes the 58mm bullets..

@jadrollervlog 2 жыл бұрын

Oooo. I have been meaning to try that too. However I love the urethane of the UC wheels. Amazing rebound. I haven't looked at the 50/50 or Mushroom though.