Рет қаралды 11,437
Iron on Coverings for Small RC Models
All model airplanes, RC and free flight, need some sort of covering. This has traditionally been some sort of cloth, silk or silkspan covering with colored dope or paint applied.
In the 1960s TopFlite developed the revolutionary MonoKote covering that used heat activated adhesives to apply the covering. MonoKote was very easy to use, had no offensive odors and could be used by anyone.
MonoKote is a bit heavy at 2 ounces per square meter, too heavy for small model aircraft.
As electric motors, lipo batteries and mico RC electronics came into use in the early 2000s, the stage was set for light/lite weight iron on coverings.
There are a range of these lite/light weight iron on coverings, to include AeroLite, ParkLite, MicroLite, UltraCote Lite and Solite. All weigh around a third of the MonoKote weight and are ideal for smaller RC model airplanes.
Here is a link to my KZfaq Channel:
/ timmckay56
Many thanks in advance for a post of this video on Facebook, it truly helps the channel a lot!
Regards,
Tim
Dumas Aeronca C-3:
• Dumas Aeronca C-3 Elec...
Guillows Aeronca:
• Guillows Aeronca RC Co...
Guillow Lancer:
• Guillow Lancer RC Mode...
E-flite Radian:
• E-flite Radian Update ...
www.StevensAero.com for lite weight RC iron-on covering.
Chapters (note: lite = light)
00:00 - Intro
00:17 - Lite covering overview
01:25 - Covering history
02:38 - Introduction of MonoKote
04:02 - Small RC models
05:36 - Where to buy
07:02 - Examples of small RC airplanes
08:52 - Lite covering tips and techniques