Building A Brookville 32 Roadster From A Pile Of Parts!!

Рет қаралды 82,000

Жыл бұрын

After getting back from our trip to South Carolina the garage looks like a bomb went off. The garage is packed with boxes of new parts for the Brookville 32 roadster, and we need to consolidate this mess. Matt and Steve get to work going over the chassis to tighten all of the bolts that rattled loose on the drive home, and get the brookville body onto the chassis. Theres a bunch of work need to get the body, chassis and engine put together to get it ready for sale! Yes this one will be for sale, here are all of the details!
1932 Brookville Roadster- No expense spared! Mocked up and ready for disassembly for bodywork/paint, upholstery and wiring.
- Brookville Body with bodywork 90% done (last owner died while it was in the body shop)
- New Professional Built Chassis w/ American Stamping Rails
- New Brookville Grill & Walker Radiator
- New SoCal Drop Axle w/ Hairpins, round back spindles
- New Lincoln Style Bendix Brakes w/ Riley Auto Drums
- Rebuilt 57 283 (never been fired) with new Rochester carb, Dual Point dist, center dump exhaust manifolds
- New Tremec 5 Speed
- F100 Steering Box
- Ford 9” Rear with parallel leaves
- New Firestone Front Runners & Mickey Thompson Cheater Slicks
- New hanging pedal setup w/ Chevy dual circuit clutch/brake master cylinder
- New Stainless Headlight Bar & 32 Lights
- Brake lines and Exhaust have all been started
- 99% of the fabrication has been completed, a few items will need to be finish welded
- Plus boxes of new parts to finish off 99% build, a few additional things will be needed to finish all the way.
- Over $40,000 already invested to get the project this far!!!
$30,000 picked up in Boyertown, Pa. Will be taking it to Charolette Auto Fair and Carlisle next month.
Email us - irontrapgarage@gmail.com
Wanna send us something?
Iron Trap Garage
PO Box 6
New Berlinville, PA
19545
Amazon Wishlist - www.amazon.com/hz/wishlist/ls...
Matt's Instagram - @irontrap - / irontrap
Mike's Instagram - @mhammsteak - / mhammsteak
Iron Trap Parts Instagram - @irontrapfinds - / irontrapfinds
Iron Trap eBay - www.ebay.com/usr/irontrapgarage/
Get Your Iron Trap Merch Here - irontrapgarage.bigcartel.com

Пікірлер: 149

@johnelliott7375 Жыл бұрын

I like to see the pup overseeing the work, priceless that man's best friend will hang out with everyone and supervise! Great day to you three!

@DuckReach432 Жыл бұрын

You can see Moon enjoys trying to figure it all out. Thousands of ancient dawg generations working with people to bring down big herbivorous animals, encoded into his genetics. He's just wondering when, during the build, he bites an elk on the leg, so Dad can jab a pointy stick into it.

@jimandlinsnow7002 Жыл бұрын

Good stuff. It’s great to see a third generation of Murray’s working on mechanical stuff. Good on you guys.😊

@patmccarthy5069 Жыл бұрын

Matt kudos to you for mentoring and training your nephew in the hot rod world and to have a good work ethic. Awesome build too.

@markcors949 Жыл бұрын

Good to see the kid hanging out and helping. You're a great teacher.

@Dave_Boyer Жыл бұрын

Your nephew doesn’t seem scared to do the work, he obviously has some knowledge of how stuff comes apart, and goes together. Good for him, seems to be hard to find people his age with any mechanical abilities anymore. Man, that’s a nice roadster, but I’m still loving the 3 window 32.

@xltranger98 Жыл бұрын

Looks like it’ll be a nice car. It’s cool to see the next generation of hotrod builder working with you and learning.

@davecochran7324 Жыл бұрын

So great to see young guns in the shop learning and working on projects I have my grand kids involved as much as they can stand hangin with Papa😂

@frozenbits48 Жыл бұрын

A friend and I did something like this in 1985. Speedway automotive offered a roadster kit so I got it delivered to my house in Kentucky and we took two days to build it. I supplied the engine and trans, a 348 Chevy and powerglide, and tires and a few other things. Morning of the third day were driving it. That weekend we drove to a roadster meet in Knoxville, sold it for a profit and had to ride the Greyhound back to Louisville!! It was great fun. Love your videos, thanks for doing them. Even though I am an old codger, I always manage to learn something new. thanks again.

@michaelguinn5736 Жыл бұрын

Morning Matt & Steve!! Wow, that 32 will make someone a very nice car! The previous owner had some serious coin in that car!! Moons tail never stops! Matt your nephew is getting an experience of a lifetime!! Well when the time comes, you will have to leave the business to someone!! Y'all be safe!! God Bless!!

@moxie99027 Жыл бұрын

Always encouraging to see the next generation of hotroding. Nice video.

@garyhughes9199 Жыл бұрын

Wow! This will be a great project . Just ordering all those new parts will take forever. Man I wish my projects would be this easy. Great to see Evan in the shop again, he looks very capable. It is easy to see he has some good mentors.

@donnengler7532 Жыл бұрын

To me it sounds like, with that firewall, that if an original part has an identification number, that part and number can be used to register the car with a 1932 date of manufacture.

@sporty196071 Жыл бұрын

That's a good start for someone who is new to building a old school hot rod. It's right at the point where a person can make it their car. Soon it will be time to make choices, in/out, colors? Interior? and a big choice is what will it be used for? Street/strip, show, daily driver. That looks like it was somebody's dream car, now you have possible for that to happen again!!!

@charlesyoung7436 Жыл бұрын

That '32 project might just sell for enough to cover the entire picking trip, yet still remain a bargain for the buyer (who won't need all of Matt's extensive skills to put it together).

@pappete9988 Жыл бұрын

Evan looks very comfortable and capable with your guidance Matt, he is getting a great introduction to the hot rod and automotive world. The whole team seems to be working well together under the supervision of the calm but ever vigilant Moon.

@ruongluesteve Жыл бұрын

Wow! I just had a quick look at the Brookville catalog, the owner must have spent a fortune on it

@rockygreen8501 Жыл бұрын

Brookville, a perfect solution to "I can't do that, l can't find that" unfortunately they know how hard it is to find that stuff and what it is worth. This is a testimonial to your methods, I wish I was building a car, needed the parts, and had the money. Thanks

@revredbeard5102 Жыл бұрын

Great you got the young man helping you I got my son to help me with my 66 charger when he was 8 now he’s 17 and can drive it to his graduation

@Bbbuddy Жыл бұрын

Looks like the original builder did a great job and gave you a great platform.

@foxyloon Жыл бұрын

Clearly the previous owner had good taste, there's a lot of nice and expensive parts here to build this car out into something great. Kinda sad he didn't get to see it finished. It'll be nice once it's done. Also, I wish I had a cool uncle like you growing up. I'd be working in your shop every chance I could get, trying to learn as much as I can along the way. I'm glad your nephew is fascinated and eager to learn the tricks of the trade.

@MrJeep75 Жыл бұрын

Love that car and seeing the youngster helping out

@terrancesweeney1870 Жыл бұрын

You're a great mentor, Matt! Well done. Best of luck on the sale of the Brookville roadster.

@randomyank7777 Жыл бұрын

A beautiful "jump start" project . Very nice . Awesome to see the next generation get some hands on experience working on this project , under the guidance of an experienced teacher who knows how it's done correctly . Great post , ITG !

@johnelliott7375 Жыл бұрын

Good morning my friend Matt I have been slacking and I apologize for that due to family medical issues. God bless you and your family and I hope that you have a great morning and a wonderful Sunday! Enjoy your day as I will enjoy your video this morning.

@pinwizz69 Жыл бұрын

Pretty cool having your nephew over helping. Get that hot rod bug in him next thing he'll be a shop helper growing up into the business as you guys pass on your knowledge to another generation. That car is gonna be one bad a#@ once its built, painted and on the road. Whoever ends up buying it should consider themselves making the score of their lives from the ITG crew.

@thomasst.martin3308 Жыл бұрын

Boy is that kid ever lucky. All I ever got to do at that age was hold the flashlight while my Dad yelled.

@geofo60 Жыл бұрын

Good to see your nephew lending a hand Matt, hopefully the next generation of Hot Rodders. My Brookville Roadster must have been one of the first, been finished around seven years now and with health issues it looks like my eldest son is going to be inheriting it. Thanks for sharing 👍👍🇬🇧

@DanielinLaTuna Жыл бұрын

For me, there's nothing as satisfying as the sound of a ratchet wrench. Thanks for showing the young man the ins and outs of the trade. Nothing as satisfying as working with your hands and making something.

@marshallcrank Жыл бұрын

Great to see the young lad working on the old stuff .

@deuceman32 Жыл бұрын

So good to see your nephew taking interest. Very cool.

@jerryjenkins9494 Жыл бұрын

Dang youndler men keep it up i love this. I have been there 55 yrs. ago.

@davidpark9727 Жыл бұрын

Wow ! That was really quick !

@plasticbutcher Жыл бұрын

Inspector Moon is on the job Keep up the great work guys Rick B

@V8Deuce Жыл бұрын

Its so neat to see younger guys all over the Country building Hot Rods . The Shifters out in California have inspired so many like IronTrap , and I hope the tradition continues for decades to come.

@BrianSmart1959 Жыл бұрын

It looked like the top of the cowl was smashed down and spread out on the sides a bit when you were putting the firewall in. I'm sure you will fix that when you beat the cowl back into shape. This must feel pretty weird for you to be working on a rust-free car. Looking sweet! Nice photobomb by Moon at the end of the video!

@mikethomas5797 Жыл бұрын

Literally "BOMB" HAHAHA Had to look close!

@carlwilliams6312 Жыл бұрын

Great to see you showing the younger generation how to build these old hotrods , great looking car , yet another great video 👍

@chuckhawes7519 Жыл бұрын

Love seeing young people learning how to wrench. Outstanding!

@SpankysHotRodsandCustoms Жыл бұрын

Great pile of parts. Thanks for sharing and keep digging

@johnkranz4004 Жыл бұрын

Very Nice project

@roberthaynes8467 Жыл бұрын

Glad to see your nephew in there getting his hands dirty. Glad Moon was there to be sure everybody was on task

@punkinsgarageandpaint8299 Жыл бұрын

I'd love to see you point out the differences between the original 32 and the Brookville. I have always heard of them but never heard the differences in them

@geofo60 Жыл бұрын

I would say they are very accurate to the original. That said depending on the level of build being aimed for, it can be very expensive. I have close to 100K invested in mine.

@peteradely885 Жыл бұрын

very informative video. Piecing it together for that first look. NICE!

@terryeustice5399 Жыл бұрын

Matt, considering how long the 32 you have been featuring. Slapped this 32 together in a couple days. Thanks, for sharing! ❤️💯

@johnboydTx Жыл бұрын

Time for gathering scraps for a T Speedster?? A great start for your nephew to build his first ride .. my grandfather pulled his old 25 rusted T out of the field when I was 12 and we started... Great memories 🤠👍 Your his teacher good luck 🤠✌️

@johnelliott7375 Жыл бұрын

Pup is like careful with the door! I will watch and see you line it up.

@AndyGeesGarage Жыл бұрын

That’d be an awesome project for someone to finish off.

@Mark-vd8oi Жыл бұрын

You guys R Kool love these roadsters.... you should see if half-assed kustoms wants to buy it. He builds some Kool rods too. You Brosnan got talent.... God bless you all.

@operator5032 Жыл бұрын

I enjoy hearing the back story on cars like this.

@mnwoodshop3877 Жыл бұрын

Man I’d love to have that car.That is one nice car even unfinished

@RMcDuffee55 Жыл бұрын

Great car. Looked like fun job setting it together. Your Nephew is good help.

@shotsrodder Жыл бұрын

All the good stuff 👍😎

@TheCrackerBox Жыл бұрын

Thanks for another , Brother !!

@xozindustries7451 Жыл бұрын

That’s going to be a really nice car, it almost seems like you should finish it to get the most out of it

@squidgameisaliarisawnosqui5341 Жыл бұрын

That's cool would have loved to see you cruising in that great video ty Steve

@hammerandhatchetengineerin4967 Жыл бұрын

Interesting pose by Moon in the background of the first still pic of the roadster. 😂. As always great video 👍🏻

@dalebucknall313 Жыл бұрын

Great looking project cant wait to see it finish. I wish it was power by a flat head ford.

@jerrypalmer1370 Жыл бұрын

Speedway motors sells those water pump risers

@KubotaManDan Жыл бұрын

32:02 Moon takes a poop during 32 Roadster cameo shots...priceless

@dirtbikechopper2012 4 ай бұрын

I can see into the future and I see your Nephew drivin` a deuce to High School that you both built.

@ericargo9157 Жыл бұрын

Ragtops are the best. Love this car. Is that a mini Moon having a private moment at 31:59? 🤪

@patrickcallaghan7432 Жыл бұрын

Great video. Great for someone to have a project that far along. Does anyone else see the face of the Virgin Mary in the door of Mike's cabriolet?

@Arskatehtaalta Жыл бұрын

It's gonna be nice daily driver 😎

@Ecosse57 Жыл бұрын

man i look at this thing and it really brings home how out of reach something like this is. biiig bucks. didn't know mickey thompson made pie crust cheaters. hi moon!

@Louie-di8pt Ай бұрын

Nice to see you're dog fertilizeing the yard in the web page photo

@PepeofCalif Жыл бұрын

that thing is gonna go down the road like a Trans-Am Z/28 w that new 'Vette and Tremec. Begging for a set of American Torq-Thrusts and a couple Woody Woodpecker Mr. Horsepower stickers !

@sporty196071 Жыл бұрын

How do you title a car like this?

@motorfreaknew Жыл бұрын

Awesome! 👍👍

@tedecker3792 Жыл бұрын

32 highboys are the purest hot rods!

@bluescelt5317 Жыл бұрын

Seems like if the chassis was on dollies you could maneuver it easily when putting the body on.

@KristerRehn Жыл бұрын

Easier than a IKEA project😁

@russelltrupia4479 Жыл бұрын

Awesome👍👍

@timclark7814 5 ай бұрын

you make it look easy

@1954shadow Жыл бұрын

“Some assembly required,” a mainstay for, Irontrap Garage.

@stevenkarnisky411 Жыл бұрын

Seems almost too easy! Lucky nephew to learn from you!

@thechevyscrounger Жыл бұрын

A company is reproducing the water pump riser speedway handles them bought one for a 30 roadster i built that didnt have a channeled body did not want to run an electric fan worked out great

@myhemi5423 Жыл бұрын

Still funny every SBC out there Seems to fall out of a Corvette

@positracoutback Жыл бұрын

I believe original 32 cowls were used for titling/registration purposes on these newer bodies at one time. Basically a loop hole to build a brand new car that is technically a 32.

@rhyshenderson3591 Жыл бұрын

Moon photo bombing in the background going to the the bathroom of one of the pics😊😅

@r1lark Жыл бұрын

Moon looks to be excited about this one, maybe he wants you to keep it?!? 🤔

@user-kn4jr4ku3m Жыл бұрын

What is Moon doing in the background at 32.00 mins.?. The car looks a brilliant project but a nogo here in France i think.

@punkinsgarageandpaint8299 Жыл бұрын

I believe that is your nephew helping assemble the headlights and other stuff. This may need to be his first car. Just an idea...,, you'd sure be his favorite if you did.

@erniehoffer1784 Жыл бұрын

Will you do a video on the parts you are keeping?

@MrJeep75 Жыл бұрын

I would love to have that car

@donhoughton271 Жыл бұрын

Very nice looking ride .How much are you going to be asking for it?😊

@csking1973 Жыл бұрын

I don't know, but could using an original '32 firewall have allowed the original owner to title it as a '32?

@moxie99027 Жыл бұрын

I think you're on to something.

@Roger-hq1yt Жыл бұрын

Sounds like the original idea

@davehefterich3760 Жыл бұрын

Plausible deniability that it's a new car.

@steveclark4291 Жыл бұрын

Is there only one trunk lid holder ? I ask because I haven't seen a 32 Roadster trunk lid open before ! I figured that there would be two to keep the lid from drooping on one side ! When it's open !

@kiwijeff3964 Жыл бұрын

The original owner had excellent taste.

@richardmcbride7180 Жыл бұрын

speedway motors now suplies that waterpump riser

@ghostma13 Жыл бұрын

Looks like green etch primer on the body

@brycechessum4684 Жыл бұрын

A brand new 32 Ford without the mechanical issues 32s had, I like it.Add another 20k for postage and local compliance to your price its out of my financial range pity

@pennypincher6730 Жыл бұрын

Instant thought on the firewall if he got a original firewall with tags for title reasons?

@anthonymarrocolo Жыл бұрын

I’d like to try looks interesting. Approximate cost?

@michaelgillespie1206 Жыл бұрын

Yeah, but shouldn't you be able to see the door hinges?

@frankschwartz7405 Жыл бұрын

I'd like to see a Model A or 32 roadster built like an old British sports car, the body sectioned and channeled will full fenders and Z-cut frame, wire wheels.....Engine?....doesn't matter. hopped up 4 with a 5-speed.

@revredbeard5102 Жыл бұрын

Curious what it will be up for sale for if it isnt sold yet