This is a literal dream. I’m having a ton of trouble getting my woodworking off the ground but I really hope I can get to the point someday I can justify having my own shop. Beautiful space man

Neatly organized, you proved 350 is more than enough space, and you have got every tool including lathe

Nice tour of a thoughtful - and amazingly clean - shop. I think there would be interest in videos on how you went about constructing some of the various storage cabinets you've made for the shop, fyi.

Those captions were hilarious 😂😂

I just built my garage of 440 sq ft and was wishing it was bigger but it was the maximum I could build for the lot size. Now I'm not feeling so cramped. 😀Thanks for the good ideas.

Nice clean well organized shop. I like the plastic peg board. One thing I noticed was you had some strap type peg retainers. I just discovered a new and better type on Amazon. They are small rubber inserts . Simply press in and the lower part of the hook presses in. Simple and cheap. I did have to drill the hole slightly larger to make it easier to push in. The nice thing as well is you can put hooks right next to each other. You can’t do that with the strap type retainers. Good video sir🤙🏻

Great looking shop. Great use of space. Thanks for sharing.

Thanks for sharing!

great ideas and use of space

Love your shop! Thank you for sharing!

Beautiful workbench! Other than the workbench I cat believe how much our workshops have in common lol.

What a dream. Thank you for the tour.

very nice!

Thank you for sharing your space and your humor.

Well laid out!

Just discovered your channel. Thanks for the tour video. I wish you’d posted videos on how you built what you have especially the bench and hand tool cabinet nicely done.

Great shop thanks

Nice shop, thanks for sharing!

Great little shop!

Great job with making the most of your space! Very efficient shop. Looking forward to more from you and your shop. Subscribed.

Beautiful shop!

I almost went with the dewalt planer because it gets such great reviews but held out ( also because of space ) and went with the Jett "12 helical head combo jointer/planer. Highly recommend .

Nice tour! Love the custom storage to take advantage of the random spaces.

Great video. Some excellent ideas.

Great looking shop and awesome video!

Wow. Great shop and video, love the organization and especially the workbench🎉

Thanks for sharing. Very impressive use of space and very thought provoking. I like how you take pride in what you build...even shop furniture and fixtures. It really shows.

Nice shop , and a great roubo workbench, thank you for the video

Terrific setup, well thought out and all of your furniture is very nicely done. A great space. And your video was executed with the same care and attention. Some food for thought there! Thanks.

Very nice shop 🎉👍👍🇺🇸

You have a great shop!

Followed you on IG for a while, I’m SO HAPPY I found you on YT - some of the BEST content on here, and your work is incredible.

Man I get a kick out of your humor...Love it

I love most everything about your videos. You put care into your work, have a good mix of power/hand tool refinement, you're about where I'd want to land as a hobbyist, and you are clearly motivated less by KZfaq fame than just enjoying your craft. Nonetheless, your videos are really well shot and edited. Keep it up.

Kevin, very nice shop, well organized. I really like all the organized processes and ideas you implemented. Great job

Such a nice workshop. Well thought of solutions. Good job!

Thank you for sharing your awesome workshop with us. Everyone stay safe, happy and healthy. From Henrico County Virginia

Very nice shop. Thanks for sharing. I am in the process of building my own sanctuary and is fortunate to have tons of space with a high ceiling in an 100 year old dairy factory.

Awesome tour! I enjoyed seeing how you make your small space work, quite a few big machines packed in there. Great video

From a fellow woodworker you gain a new subscriber. I love the fact that everything is visible and accessible. Great workshop layout!

Great set up. My favorite tool is your table saw too! LOL.

Great use of space! Will have to incorporate some of these ideas into my 100 square feet shop.

Beautiful space! I also have a Mike Pekovich inspired tool cabinet, mine is not complete, but I am working on it. It is a great choice to base our cabinets off of.

Thank you so .I have a small shop also 480 sq ft.After watching your video I will look at how stop wasting space. Again thank you. Julien Lamarche

Nicely done. Excellent video, well planned and to the point. Beautiful shop and I can see how it is your sanctuary. Congratulations!

350 sq ft? positively spacious! I have less than 1/3 your space (10 sq m) and as well as all of the same woodworking tools I have a large metalwork lathe, milling machine, welder, brazing station, electronics assembly area, and a second bandsaw for metal. Of course, I do not clutter up the space with systainers (probably the worst form of tools storage invented by man- so many steps to retrieve). I did have to site my CNC machines and 3D printers elsewhere- but then you do not want those is a workshop anyway- they do their work without you needing to be there. Takes a bit of planning, but perfectly possible.

Hi - Thanks for the shop tour, you have some really nice tools and some great ideas you have given me. New subscriber now look forward seeing more - thank you from UK

My shop is the same dimensions but in my basement. It’s plenty of space. You are well spoken and easy to listen to. Keep up the good work!

Now that's a nice set up in your shop. Nice and organized not like mine. Thanks for sharing.

I love pegboard but have been moving away from it and starting to use magnetic tool holders. I mount them to the pegboard so I get a mix - best of both worlds.

Well thought out shop . . . also agree to pegboard over cleats . . . .more options

I am a furniture restorer. Just found your channel. Liked and subscribed. Love your shop. I, too, work in a small space 9.5'x18'.

I needed ideas for a shop layout. My shop is 14x30 with an OH door at the rear of the shop, double doors at the front...your video is very helpful.

Hi - great tour and thank-you for sharing. I still find it amusing that US single car garages come in at 350 sq ft when a single car garage in the UK is typically only 258 sq ft. I loved all the space saving ideas especially the cabinets across the beams - something I'm going to give serious consideration to in mine. Oh, and I'm with you on the mitre saw and for similar reasons don't feel able to let go of it right now. Anyway you've got a sub and good luck with the channel. Karl.

I work in about 160 square feet. LOL.... Great shop and video. Keep up the good work. Shalom

Nice shop. When we bought our home 10 years ago, we looked for a three car garage. Both cars are parked inside at night. I essentially work in the space of a one car garage. Definitely doable. I was coming from a condo that was 670 square feet in size so between the house and garage, I felt like I had moved into a huge space.

Love, love, love your shop set up. I'm building a home (should be finished in about 4 weeks) and its got a 14'x32.5' woodworking shop (almost the same size as yours). I've got 10' ceilings so I'll have a bit more vertical storage. I've tried to organize my tools using Sketchup but alas not being in the shop I can't come up with a good plan. After seeing your shop I've a much better idea of where things should go. I've got just about every tool you showed so our shops need the space for the same equipment. I don't have a lathe, but it's one item I'd love to get. In my shop I've got a dog run across one end (the end opposite the garage door) so I lose about 44" of linear space, however I plan on using the bench over the dog run for my miter saw. I've been away from woodworking for about 20 years now, but now that I'm retired (64 years old) I'll have the time and space to build stuff. Thanks for posting this and showing how you set everything up, it's going to be a big help for me organizing my new space. You got a new subscriber 🙂

Mine is 209 sf and is small, I do have a freezer box style there and an old coal stove which I use to heat up the garage (not attached to the house), I do scratch my head trying to configure the setup of my power tools but I don’t have the room to work efficiently. I do like that tool cabinet you have and I have to build one like that. Also I sold my Jet table saw and got a Dewalt table saw since the other one was too big.

Just getting ready to set up new shop about 1.5x this size. Great inspiration. Would love a video on your bench. Too late for the build but anything you could share would be welcome.

What a great shop! You should look into an Oneida Supercell wall mounted DC. I was surprised how much more room I got over my Laguna, not to mention serious power!

Simple thoughtful time and space-saving organization is the keystone to any shop. How you equip your shop depends upon the needs of the work you do.

I have a small workshop too. Mine is 360sqft. What size is your SawStop Tablesaw. I like your idea of putting the Router on the end of your table saw. Because of time and other things that had to take precedence I haven't had time to really get my shop set up. I've got a jobsite table saw and have both my table saw and miter saw on gravity rise stands like you so I can pull them outside when I need to work on stuff. My shop is packed full of lots of other stuff right now and my goal this year is to finally get everything set up. I want to upgrade to a SawStop PCS 3 HP and I see once you get everything organized in the shop it doesn't leave much room in a small shop like ours. Thanks so much for putting out this video because it has HELPED me tremendously.

I have a shop about the same size as yours, my space preserving strategy was a smaller euro 5-in-1 combination machine. With the table attached to the sliding table saw the unit takes up slightly more space than an American cabinet saw but then you don't have another footprint for the jointer and planer.

Very nice shop. Love the comment, "today it's probably like $17MM dollars". Isn't that the truth!

i have the same laguna bandsaw I did not like the mobile base . i went to home Depot ang got 4 2 1/2" casters with a stud base. the bottom of the band saw has holes on all 4 corners of the base i put the casters in very stable base and you have 4 locking points

Happy New Year! Great Small Shop layout! "?" what brand of panel clamps do you use and have you been pleased with the performance??? Cheers, Arnie

I have very small shop (225 Sq. Ft.). I'll use several of these ideas.

Nice Shop. I was wondering what your floor covering was, and if you are happy with it? Thanks for sharing!

I just had to be subscriber 1,000.

I have a little less square footage, 16x21, but there is also other stuff in there besides wood working stuff. I'd like to get a jointer, planer, drum sander, and dust collection system, but don't quite have the space for that yet.

Great shop! Would you happen to have plans to your bench?

Nice layout. What hinge supports are you using for table attached to fireplace? Thanks for the info.

Great shop tour. You do a great job at maximizing the space you have. Do you turn on the dust collector when using the planer, or is the blower fan inside the planer powerful enough to blow the chips into the collector?

Nice space and setup. Would you mind sharing the hardware/brackets source for the folding wall bench mounted to the chimney? Thanks!

Nice video. Question, do you find with your systainers set up the way they are that you slide them out and just take out what is needed or do you still remove the systainer to gain access? I'm on the fence about doing double depth for my systainers under my cabinets.

I also work in a one car garage, love these ideas. How long did it take to clean the shop before you made this video?

Helk I wish I had that much room

Love your shop but, it may be a single car garage but it's obviously a large single car garage as it's massive compared to my single car integral garage in the UK. 😄 I'm wrestling with the issue of extraction at the moment as like you, I just don't have room for all the ducting and also don't have the room for a complete dust extraction / cyclone system either.

Kevin, awesome Sho🥲🥲shop tour, thanks for sharing it! Very well organized and set up for ample work flow. I did one about three years ago and it’s amazing how many additional tools we can gather 🙂 I’ve always found organization, workflow, and keeping a clean shop is important. Not only for safety reasons, but peace of mind. Looking forward to subscribing and watching more of your Contant. Keep up the great work!! 😎👍

Where do you store the chopstick maker?

Did you need to upgrade the electrical service to the garage, or was whatever the home builder did enough?

What hardware did you use for the folding table?

Someone may have already asked but curious how much power you have available in your shop?

Two things you can not have enough in a wood shop , clamps and room.

What wood was used for the workbench top?

Correct about the PC router. They don’t make any of them any more.

Another way to regain space and make a little cash is to sell those Festool boxes. Other than my Domino and large router they are completely unnecessary and space hogs in home shops.

Gigantic? Huh? Haven't worked on a slider yet?

Great use of space but by your overhead lumber storage, I guess you don’t live in earthquake country.

You have plenty of room for a miter saw!

"Is 350 sq ft enough space"? If it's 10 ft x 35 no!

So you love safety but you have no riving knife and no blade cover? Wtf is wrong with you?