I had a LOT of fun testing each of the brands and JB Weld is simply amazing! Thanks for all the video suggestions too! Best regards, Todd Flex Glue: amzn.to/2CQI20v JB Weld: amzn.to/3j2Hy6P Loctite: amzn.to/2YnnBj2 Gorilla: amzn.to/2CTqocs

I need more weights *comesback with railroad iron*

From what the legends speak, JB weld is made by melting Nokia phones at the center of the sun.

Surprisingly, the biggest takeaway from this channel is the insane amount of preparation work that is put into every episode.

Tip for JB-Weld users: warm up the tubes in some hot water for a few minutes. Results in a significant reduction in viscocity, making it MUCH easier to squeeze out of the tubes.

Long time J.B. Weld user, but still amazed by the results. One application it's not suited for: muffler repair -- or any continuous exposure to very high heat. Very suited for some rather unorthodox repairs: I used it to seal up a turtle's shell that I apparently ran over with a bush hog and cracked it very severely, so that you could see his insides. By the time I found him, the flies had already blowed his innards, so I had to flush out the maggots with hydrogen peroxide. I always wondered if the repair worked to save his life, until I found him again over 3 years later, very much alive and kicking, J.B. Weld repair still intact. Needless to say, I named him J.B.

"I need to find more weight" *cuts off a chunk of railroad behind house*

Your control methodology is outstanding. The comparisons you make are about as fair as anyone could make them. Great work,

This guy must have a full month worth of hours into this video, I can’t even imagine all the time for all these tests and all the editing. You never cease to amaze me with all the hard work and all the hours you put in. Truly amazing! All the effort and thought you put into your content!

Jb weld be like "less marketing, more result." lmao

Next video: JB weld vs spot welding

I had an old Escort with a crack in the oil pan that leaked a little bit of oil. I looked up how hot the oil pan gets when the engine is running and how much heat JB Weld can take. According to the internet JB can take the heat so I fixed the crack with it. It never leaked again during the time I owned it.

As a retired engineer, there are times I really wonder where you get your testing criteria for a given type of product, but to be fair, nobody can be an expert in everything. I've come to both appreciate and enjoy your tests. I guess what I'm saying, is that even though you're not an expert in everything, you do a pretty damn good job in creating interesting, informing and fun videos. Thanks and keep up the good work. Cheers, Dave

I've never cheered for a sports team the way I was cheering for good ole J.B.

Yeah, i weld Stick, mig or tig? -jb

I believe you use these videos as an excuse to dream up and create all the tests which is what you really love to do and we all love them too. Keep it up.

I worked in an adhesive development company back in 1995 and basically we were trying to assemble an entire car excluding the engine with only glue glue adhesives are the future again your controls are amazing love your stuff

When the material fails before the bond,that's pretty impressive.

During weight test: When he asks 'Can flex glue beat JB weild?' Flex glue: *starts sweating Intensily*

I have used JB Weld for the valves that had broken on several small engines a few times and they all still running today with the same valves I glued together. This was about 25 years back.

I couldn't help but laugh out loud in astonishment, I've used jb weld forever (like alot of DIYers) and always spoke of what it can do. To see it in action though in a clinical study almost, speaks for itself

I had a piece of stone break off my house when I hit it with the lawnmower so I immediately said to myself I bet project farm has a video on the best glue/adhesive and sure enough here I am.

"I need more weights." ... pauses video and heads to Home Depot to buy some JB Weld

Wow, I used to use JB Weld but switched to other products because of the A/B mix issue. You just taught me I need to always have it in my tool kit since there isn't anything else close to it's strength.

I really appreciate your tests. You take such lengths to prep tests and give real world applications. You are so meticulous in all of your tests. What a great service you provide for so many.

Very impressive J,B,weld saved my life once! I was out on my dirt bike riding when I crashed my bike. I was at least 22 miles away from anyone or anything! I'd broke my ankel and cracked 3 ribs. My bike handle bars snapped right off. I had J,B,weld in my tool bag Along with plires and a tire patch kit with my hand pump. There was no way I could walk back to my truck. I J,B, welded my handle bars and within a few hours, I was able to coast down a hill pop it in gear and Ride back to my truck. I was very happy I'd had my J,B,WELD with me that day.....

This video is just a testament to how good JB weld actually is.

Excellent video! Really enjoyed how you did your testing. Very well thought out and clearly a great visual representation.

JB Weld, which is an amine epoxy, is great- JB "Quick" which is polyester based (I think) is not good for much at all and looks similar (packaging) so choose carefully!

Crazy how good JB Weld is.

The lesson we've learned so far on this channel is: Use JB Weld

Your channel is one of the most useful on KZfaq, thank you for the time and effort that goes into these videos. Thank you 👍👍

I really appreciate the time and effort you put into doing these tests! You're very methodical and precise. You produce results we all can take to the bank! Very well done! :)

It's all fun in games until the railroad iron comes out!

flex glue: **loses** meme lords: i dont speak *wrong*

I thought your tests were well thought out and quite comprehensive; and the results speak for themselves, I appreciate the time and effort you have put in to doing these tests (especially the preparation which is so often skipped). Well done!

Thank you for taking the time to do all the product testing and showing which one preform best. I have used JB weld on many repairs and it seems to last a long time whether it's used on plastic or steel. Thanks again for doing what you do.!!! Happy Holidays.

I'd say JB Weld should sponsor you but the fact you aren't sponsored is what makes these videos so reliable and enlightening. Easily one of the best channels on youtube.

Ah. J.B. weld. One of the three god materials. (The other two being duct tape and WD-40)

I've been bingeing a ton of your videos the last several days and this was one of my favorites. Probably because I've always been a Gorilla fan and was so shocked to see how poorly it performed (I don't mind being proven wrong!). I would love to see an update to this video, either with additional types of adhesives or epoxies, or just with new fun tests!

You are so meticulous about everything you do! I appreciate all your testing you do I rely on every test you do. Have a great day!

Him: _Now that's alot of damage!_ Phil Swift: *He's like a son to me*

You can see a lot of tight editing went into this production. Your late hours at the computer aren't in vain. This video is well done. Thank you and Merry Christmas, Project Farm! :-)

My word, you put an amazing amount of work into these tests, always impressed.

It blows my mind how much effort goes into the video and that you’re still responding to comments, absolutely awesome!

Fast forward sound of bolts getting screwed on is secretly one of my fav parts of the videos.

Damn if only my parents used JB weld to hold their marriage together...

A lot of the tests some failed at zero and I was just going to write about the lack of... but then the next one was unbelievable in strength. Just shows how valuable the channel is for finding the right thing

SO APPRECIATE authentic reviews and tests.

You have drastically influenced my purchase habits with these tests! THANK YOU

So what I’m getting from this is that JB weld is a f*****g powerhouse

Wow, your videos are brilliant. I love your no nonsense, no waffle style and you do such thorough tests. Thanks a lot!! 💥

I always enjoy watching your tests. Thanks for posting!

Legends says he is still adding weights to broke jb weld attached tiles

_“Phil Swift has left the chat”_

Your videos are fantastic you try to include every possible scenario and your controls are outstanding when you start your testing good luck I look forward to the next one I’m gonna see if I can come up with an idea for you take care

Your tests are greatly valued! Thanks so much!

Long time JB Welder and hasn't failed me yet

The wrench drop test looked absolutely tedious. Thanks for being willing to do such things for your testing and Merry Christmas.

I really love watching you test products I'm never likely to buy... when you test thing I may use... its great

You continue to impress too! Thanks again. What wonderfully devised tests!!

I should have used JB Weld for my marriage. Go ahead laugh at my pain..😭😭 This video was phenomenal!

“Can’t you do something about your superiority complex?” JB Weld: “But i am superior”

I like all the test u have done over the years good job keep it up

so many helpful demo's with varying results. two of the four products demo'd were ones I've used in bicycle shops as employed, loc-tite, jb weld, the other two in real Life world situations. extremely impressed with JB weld. thanks for doing what you do!

After this, Flex Glue will have a two part system too, only thing is, the second mixture is JB weld.

Sooo JB weld for everything exept wood, gotcha.

Great test! Amazing the way you do these.

Yes your test were well done very precise timely and the visual was perfect appreciate the time you put into it will subscribe

Good Ole 91% rubbing alcohol from Walmart. JB Weld was very impressive. :-) My only problem with JB weld, it starts becoming flexible when heated over 200 DEG F. The higher you go, the more rubbery it gets. Great video Todd. Have a very nice Christmas!

Watching those cylinder heads blow-off like that was incredibly satisfying - thank you for taking the risks and filming the results!

Thank you so much for these videos they are greatly appreciated. I've been watching your channel for a couple years now, and have learned a lot. Thanks again, and God bless.

I would love to see best garage/workshop heaters. Your reviews are by far the most reliable, in my opinion. Thanks for the great work. Became a patron today!

*NEXT TEST: drill a hole in an engine block, seal it with JB Weld and see how long it will run*

I laughed every single time he said “that’s a lot of damage”

That was a awesome test 👍👍..iv been a automotive and diesel mechanic for 35 yrs and iv used JB weld on many things and it is amazing on what it can do...iv put it on a cracked engine block that froze and cracked on the outside of the block and after 13 yrs it's still holding and being used daily...the key to it working properly on anything is preparing the surface and letting it cure properly.... great video thanks again...

Great video. I'm getting ready to repair a plastic grill on a car I just bought. This video was very helpful!

J B weld has made a believer out of me.

"To test the strength of flex glue, i sawed this engine in half!"

I love you dedication to using the tools at your disposal but taking the time and attention detail to make sure the results are meaningful. Loctite seems to be great for medium use, and J.B. Weld for everything else.

Best Demonstration I've see yet, Thank You

This was amazing. The strength of JB just had me in tears from laughing so hard.

True story. I met a man named Larry in late 2018 in Encino, NM and we got talking about JB. He tells me a story about how when he was in the military in the 70's he had a filling come loose and was not near dentist/medic. He used JB weld to hold it in place temporarily till he could get it repaired properly. He still had it holding that filling in 2018 going strong.... I was mind blown by it

Thank you so much! You should be sponsored by JD Weld! That was an awesome display of time and effort. We appreciate you.

Great test of those products. I sent the link of this test to some of my buddies who are obsessed with fixing stuff (like I am).

JB Weld is such an amazing product. Now I understand why my father used it for everything.

This has to be one of the most entertaining and informative channels on KZfaq. Bravo Sir.

I love your videos. You are my go-to resource for product testing when I am shopping. Thank you and keep up the great work. JB Weld - Long live the king.

Love your videos, extremally helpful and cost effective. Excellent work.

These companies must hate you lol

Goddamn. I just found this dude, and can't stop watching. He has the perfect voice, and everything about him and his channel is just perfect

Wow this was a great eye opener! Thanks!

You have come so far from your first videos. Very impressive. Well done.

I think JB Weld needs to buy you a pickup truck or something, haha.

In 1998, My wife and I, on our honeymoon, did a 3500 mile drive around the western US in a Plymouth reliant. Near the town of Moab on a small mountain, I blew out the radiator on the up side. I had a couple of gallon jugs in the car (I have no idea why) and stopped at a stream and filled them up and kept filling the radiator until we got to moab. Once in the parking lot of an auto parts store (that closed in 15 minutes), I saw that the seam between the cooling part and the large end pice (the radiators are tilted 90 degrees from what you normally would see) hat split and, at the top it was at least a 1/4 inch gap. got me some JB Weld. We then went to the grocery store and got a six pack of coke in cans and a pair of scissors. We dumped the coke (we don't drink soda) and used the scissors to cut them into rectangular aluminum sheets. I bent them into an L shape, slathered on a thick coating of JB weld and pressed them into place. We only let it set for two hours because we had to get to the California coast. To be safe, we had the jugs of water and another package of JB weld and the cans. Well, we made it to Mt Shasta before it started to show signs of leakage. The JB Weld had not been given the opportunity to fully set, so I was still pleased with that. It had become like chunks of rubber. I pulled it all off, did it again, and this time it sat overnight. We finished the trip, returned home to seattle, and replaced the radiator, though it never leaked.

You do something very few others ever do, you make real world applications that people might actually use it for. Most testers are all digitized which is neat, but no one ever shows you how YOUR project might turn out if you do this. So, thank you, for such an ingenious yet simplistic real world array of testing.

Was searching for water pressure plastic to brass. Great video thanks

I was rooting hard for JB. Nice xD. I glued a couple of pennies on the curb in front of my friends house in Jb weld as a kid. I am 24 and they are still there

Phil Swift: *IMPOSSIBLE*

Those were some really great, well thought out, tests!