No video
Is my Front End Bent?!?! Crashed Track Bike!!! - GSXR750 K7 Rebuild Part 4
Рет қаралды 1,195
Күн бұрынIn this video we strip the front end out of the bike so we can check everything is straight including the forks and also get the steering lock stop repaired on the lower yoke.
I'm currently away working at the North West 200 so have been a bit limited with time to sort out the chapters of this video and such like.
Will tidy it up next week and hopefully have a video put together from the North West next week.
Thanks for watching!
@firestorm755 Ай бұрын
Valid point re front wheel. It's really important to follow correct method for tightening
@dennisgibb7958 3 ай бұрын
It is not the forks,wheel,Tripple clamps that usually bend on the GSXR line. It is the frame. I have had one fall off the side stand and bend the frame. Have seen low speed low sides where the bar end has actually punched a hole in the frame. Frame shop it, otherwise you are just pissing into the wind.
@cm4734 3 ай бұрын
Really enjoying the content. My ocd has kicked in and I was wondering why you don’t get some palmer performance stickers made up to cover the free advertising that you are giving your Tough Crates. Good luck with the race spannering.
@PalmerPerf_ 3 ай бұрын
Thanks for the comment 👍. Tough crates don't exist as a company any more so all good 😁
Palmer Performance
Рет қаралды 1,2 М.
What the Meowk!
Рет қаралды 9 МЛН
Dave Moss Tuning
Рет қаралды 290 М.
Palmer Performance
Рет қаралды 6 М.
Palmer Performance
Рет қаралды 2,8 М.
Palmer Performance
Рет қаралды 1,8 М.
REPerformance UK
Рет қаралды 55 М.