Is my Mercruiser manifold and riser bad? 4.3MPI, Campion Allante 565i

  Рет қаралды 17,855

AK

AK

2 жыл бұрын

How to inspect and tell if your manifolds and risers need your attention, or to be changed.
Without taking apart:
1/ check for corrosion on the outside
2/ check for leaks around gaskets from the outside
3/ check oil level
4/ check oil color
5/ check temperature
Taken apart:
1/ check water passages
2/ check for signs of corrosion inside exhaust
Tips:
1/ use only high quality risers and manifolds
2/ perform all checks on regular basis
3/ flush as much as you can whenever you can

Пікірлер: 9
@gm1937
@gm1937 4 ай бұрын
Thank you so much Professor AK, Did you realize that your dog was trying to inform you at 3:26 that you should not have waited 16 years to replace your manifold.
@akleviathaniii634
@akleviathaniii634 4 ай бұрын
😂👍
@robertjohnson957
@robertjohnson957 2 жыл бұрын
Very helpful. Thank you!
@3rdEye__FPV
@3rdEye__FPV Жыл бұрын
Thank you for this information!!
@robertjohnson957
@robertjohnson957 2 жыл бұрын
Very helpful and thank you
@EnlightenedAspectProductions
@EnlightenedAspectProductions 11 ай бұрын
This is a dry joint exhaust he is showing. They last considerably longer than five years, especially if you flush your engines after each use.
@gm1937
@gm1937 4 ай бұрын
Not in saltwater
@keithdickinson6045
@keithdickinson6045 Ай бұрын
You got that right. I was trying to figure out how long these dry joint exhaust systems last and couldn't find any definitive answer anywhere so I contacted the inventors of it at "Performance Product Technologies". They own the patent on the dry joint system. I talked to the actual man who invented it (name escapes me) and I told him my set up. I run in a mix of salt, brackish, and fresh water and that I diligently flush after every use. He said he would not be surprised if they lasted longer than 20 years (but understandably did not want to imply a warranty for that long or anything). My boat is a 2005 and still has the original dry joint system on it and it runs as good as ever.
@hightidelowtide6380
@hightidelowtide6380 2 жыл бұрын
Lol "without taking it apart?" You have the manifold set on your table? You will need to remove the manifolds to inspect them!! If they are removed, throw them away and buy new ones. Saltwater lasts only 5 years and fresh 10
Mercruiser 5.7 Replace Manifold and Risers
29:16
Brett Husselbaugh
Рет қаралды 62 М.
Я нашел кто меня пранкует!
00:51
Аришнев
Рет қаралды 3,7 МЛН
NERF WAR HEAVY: Drone Battle!
00:30
MacDannyGun
Рет қаралды 48 МЛН
small vs big hoop #tiktok
00:12
Анастасия Тарасова
Рет қаралды 33 МЛН
MEGA BOXES ARE BACK!!!
08:53
Brawl Stars
Рет қаралды 35 МЛН
Marine Exhaust Manifolds. How Do They Work?
12:42
Schneids15
Рет қаралды 314 М.
Part 10 - Mercruiser 4.3 (2) - Intake Manifold Install
10:40
Moccasin Marine LLC
Рет қаралды 19 М.
Episode 1512 - Manifolds & Riser Replacement
22:35
MarineEngineParts
Рет қаралды 329 М.
Why is my BOATS Engine OVERHEATING? Thermostat Replacement
19:45
Keys Boating Channel
Рет қаралды 13 М.
Mercruiser 7.4 MPI Water in Oil
6:36
Luke Szari
Рет қаралды 30 М.
Exhaust manifold pressure test
2:50
OBrien's Garage
Рет қаралды 115 М.
Pressure Testing Mercruiser Exhaust Manifold
2:24
Kevin Schnebly
Рет қаралды 14 М.
Я нашел кто меня пранкует!
00:51
Аришнев
Рет қаралды 3,7 МЛН