Is the Beavercraft AX-1 Axe the Best Budget Axe for Woodworking?

Рет қаралды 15,965

Күн бұрын

#woodcarving #aleclacasse #woodworking
Today I will put this Ukrainian Made Carving axe through its paces and see if it holds up to some hard birch and knotty pine spoon carving. I also briefly test out Beavercraft's Sloyd and Hook Knife.
Check out my carving school:
www.aleclacasse.com/online-wo...
Affiliate Links:
Beavercraft AX-1 Axe:
buff.ly/3Kd0Oim
Beavercraft Detail Knife:
bit.ly/3neGvrS
Beavercraft Knife Set:
bit.ly/3TBIouI
Ryobi 1.2amp Rotary Tool:
amzn.to/3j0se0i
3M Face shield
amzn.to/3Hh8pto
Makita Chainsaw 5012b
amzn.to/3kPXwqV
Manpa cutter head:
amzn.to/3HDEa1a
Also use this discount promo code on your next Kutzall carving burr purchase!
Discount code: LACASSE
at the website below!
kutzall.com/?aff=84
Makita angle grinder:
amzn.to/3HCEg9ud
Purchase the Flexcut knife here:
amzn.to/3Cpv0Td
Flexcut Gouge Set
amzn.to/3H8FwAN
Carving Glove:
amzn.to/3Glebdm
2” x 2” x 6” Basswood Blocks:
amzn.to/40cXWbc
Leather Strop for sharpening:
amzn.to/3Gq9cYP
Honing Compound for Strop:
amzn.to/40cXWbc
Spray Finish For Carving:
amzn.to/3GHSi9j
Artist Paint Brushes I use:
amzn.to/3GMSRi0
Artist Paint for Carvings:
amzn.to/3ZgFXjL
Super Glue Accelerant:
amzn.to/3Cy1ISj
Gorilla Glue Super Glue:
amzn.to/3GJoqJQ
Purchase the Flexcut Multi Jack here:
amzn.to/3VMR5lj
Crocs:
amzn.to/3inWdif
Check out my one day online workshops here:
www.aleclacasse.com/one-day-o...
Thanks for the support! Buy me a coffee here: www.buymeacoffee.com/aleclacasse
What I use to sharpen my tools:
www.worksharptools.com/?rfsn=....
Check out my online carving school by clicking the link below:
www.aleclacasse.com/online-wo...

Пікірлер: 39

@kevinmorrice 3 ай бұрын

beavercraft is within my budget, so i enjoy it, plus there slightly thicker blades are better for my whittling style

@jimnisbet1969 Жыл бұрын

Nice wee review video Alec. My introduction into carving was through bushcraft. My first bushcraft knife was a Mora companion carbon steel. Fantastic knife for the price excellent for bushcraft not so much for detailed carving. However, it’s a good steel that holds its edge. I then got an opinel #7 folding knife; another reputable French knife. That thing is razor sharp due to its thin blade. I got a Ray Iles carving knife which also has excellent Sheffield steel (extremely reputable steel makers in the uk)

@jimnisbet1969 Жыл бұрын

You should check out his dads company Ashley Iles. He makes gouges and other carving tools.

@EggyOrphan Жыл бұрын

Just recently found your channel and love your content! Been watching all your videos lately Im no expert either but I ordered it and returned it just because I had bought a Vaughn Hatchet with a wooden handle before. I cut the back off that had hammer shape, cut the blade to match the Beavercraft and regrinded bevels as you mentioned and love it. Edge retention wise Im not sure but it was a fun project. Might make a better handle at one point but for now it works really well. One thing I would say i would love to have that rustic look but for about 25 bucks not bad😁

@AlecLaCasseArt Жыл бұрын

Cool idea! Thanks for sharing!

@MrMann703 Жыл бұрын

Thanks for the review, I liked the perspective you brought. I purchased the hatchet for my hikes so I mostly will be using it for camp type activities like shelters and wood processing maybe some basic shaping light carving, carving needs practice but as long as I can make utensils I'll be happy

@AlecLaCasseArt Жыл бұрын

Hope it worked out for you Lauren!

@MrMann703 Жыл бұрын

@@AlecLaCasseArtthank you, it's a nice little hatchet, I like that rustic look and that I can tell it was hand made. Take care

@phillipjackson2877 Жыл бұрын

Try wrapping some hockey tape around the bottom of the handle, maybe that would help with the griping.

@wattsnex2725 Жыл бұрын

Thanks for this review. I’ve been spoon carving for about 6 years but I’ve been looking for a smaller axe. I have a grandfors bruks which is stellar but it’s been really rough on my carpal tunnel. Bought a Prandi 600, but the bevel on that is brutal. Been eyeing the beavercraft one because the size and handle. It might be worth the shot. As for the sloyd knives, just buy the morakniv 106, same price roughly but way better.

@AlecLaCasseArt Жыл бұрын

No problem! Thanks!

@Elconquistador1979 Жыл бұрын

I recently bought the MoraKniv 106 it is amazing

@johnjude2685 Жыл бұрын

It's not getting stuck while cutting. You change the bevel and start getting struc. It's because of the bevel that you did. It looks like I'd prefer at little more bottom on the handle as you, too, agree. I'm a wisher that all wooden handles be built oversized and have wood extra to have to be trimmed to fit anyone's grip . Like faces, our hards are also different . Believe that axe should have more beard for wood carving from what I know. Thanks as you say Beaver Craft is a great introduction, but little tune they can move up easily.

@zacharygross1207 Жыл бұрын

How much did performance improve after stropping?

@AlecLaCasseArt Жыл бұрын

Haven't done it yet! Lol

@HerradaJulio Жыл бұрын

Alec would you recommend the Beavercraft carving knives?

@AlecLaCasseArt Жыл бұрын

I like the detail knife they sell a lot!

@HerradaJulio Жыл бұрын

@@AlecLaCasseArt Thanks

@HerradaJulio Жыл бұрын

I am planning to buy the 3 carving knives combo.

@AlecLaCasseArt Жыл бұрын

@@HerradaJulio Ah, let me know what you think!

@hamsteren2509 11 ай бұрын

Well my old post ww2 axe looks like it carves better than the bevercraft, though if the steel is good then its not a total loss. Great review btw.

@tomevans4402 Жыл бұрын

Interesting. I’m looking for a small axe. I have the detail knife and I like it.

@AlecLaCasseArt Жыл бұрын

Not a bad option, some consistency of quality issues I hear!

@lovetheNorml 11 ай бұрын

Definitely a softwood carver. Thanks for the review.

@freak4lifespeakCHRIST Ай бұрын

It rusts quick with exposure to continued water. Like a beloved family member and leaving it outside one night.

@VdubSPAZ 8 күн бұрын

I consider Beaver craft to be the best all-around knife and the reason why I say this right it's not because it's a great knife but if you get the premium set it does come with Walnut handles that are naturally finished not a whole lot of slack on it which in my opinion ruins the flex cut but the beavercraft has one great feature about it second thought it has several great features about it for starts the price point to further than that it is a great tool to learn on because you need to sharpen no matter how expensive your knife is you buy an expensive hundred-dollar knife destroy it because you don't know how to sharpen that should be the first thing you learn in wood carving plus it's easy to sharpen and be stropped and the worst case scenario you don't succeed I didn't cost you $100 to learn on it but at the same time it has great metal that once you get it right it carves amazingly and if you want to have your own profile and shape your own knives that's great for that as well I come from a background of making my own profiles of knives I've even used Sawzall blades and I'm here to tell you keeping them well oiled

@CockatoobirdmanBill Жыл бұрын

Just what kind of glove do you need for Axe carving??????....I like the look and the size....🦜

@jons2447 19 күн бұрын

WHY? Why do *NO* axe carvers EVER try out a real cheap tool? I have the Harbor Freight "PITTSBURGH 1-1/4 lb. Hickory Axe", it cost $12.99US. I don't do "wood carving" per se so I don't if it's good for that or not. But it is good for all the normal uses & I do some rough chop shaping with it. I have a small broad axe/hewing hatchet. I usually use it for roughing in say, a hatchet or axe handle. Most of my chopping is for roughing in a mallet head or a handle or some such. So I (& many others) want to know how good or bad for carving it is. If it is *too* bad I'd need to buy a specialized tool. But if it is "good enough" I can regrind the edge & start carving, IYKWIM.

@AlecLaCasseArt 14 күн бұрын

I have one of those HF deals! I should review it!!