Be sure to follow us at www.boosted-ride.com boostedride boosted.ride
Пікірлер: 29
@briananderson52847 ай бұрын
WOW Awesome Congratulations on the WIN !! Very Awesome Happy Holidays!!!!!!
@dicknijenhuis98947 ай бұрын
I'm always amazed at the amount of work and dedication you put into the trucks. Don't beat yourself up too bad about forgetting stuff. Shit happens especially when you're on a deadline.
@Labergemusic7 ай бұрын
Congrats on 10k, absolutely love the videos and I really hope you have a great Christmas.
@barryfunke81657 ай бұрын
Merry Christmas Adam and Jason!
@humble77367 ай бұрын
Merry Christmas from Australia guys 🎉
@swissmochaj7 ай бұрын
Merry Xmas team boosted ride! Looking forward to the next video! Glad the trucks made it out of the event relatively healthy.
@seananon48937 ай бұрын
MERRY CHRISMAS! The new Panel truck whoops ass!
@gafrers7 ай бұрын
Merry Xmas. Always great work. Also a project is never done, especially when Rushed for an event
@Blain57007 ай бұрын
No chicken foot Jason!!
@gullreefclub7 ай бұрын
Merry Christmas Kelly Family.
@colinlovelace59837 ай бұрын
Merry Christmas to you and yours, sending Karl and his family a Merry Christmas as well! Nice to see 10k…..you deserve it….been a sh!t load of work.
@redman7157 ай бұрын
Merry Christmas friend! 🎄
@Dirtyrpide4life7 ай бұрын
Could absolutely tell when you kicked in to adrenaline mode 🇺🇸🤩🥰👊🏻!! Like grave digger once a sketchy landing hits hard going primal mode !
@JeffSlover7 ай бұрын
Nice long video. Glad to see the rear end on Crypt Keeper was OK after seeing all of that movement! Can't wait to see what 2024 has in store for you!
@xx11seczxx7 ай бұрын
Maybe wrap it in tugboat rubber if Jason’s gonna drive it lol
@Labergemusic7 ай бұрын
"There's tread left" he says in disgust lol
@Labergemusic7 ай бұрын
Good throwback to you stating you did something you didn't do. We all do it.
@Powatodacarz17 ай бұрын
You should do a burndown catch can for the whole motor that breathes into the exhaust so it burns the methanol fumes off in the exhaust. If designed correctly it will also pull a vacuum on the crankcase via the Venturi effect.
@BustedRadialGarage7 ай бұрын
Merry Christmas Fellas, Get them fixed. Homer is coming for that $$...lol
@karlstaineswalsh44827 ай бұрын
Mines wet sump and a hi pressure pump 140 psi start of run at 7200 and 80 psi at end of run 40w70 engine oil
@600wheel7 ай бұрын
Merry Christmas guys. Is there any reason you don’t have tread cutters behind your rear wheels, just sharp pieces of plate that are designed to cut the tread if it comes off like a recap rather than having it whip around. If you got a sawmill near you stop in and ask for some old chipper blades or planer blades they work great
@NoMatureContent7 ай бұрын
Instead of that tiny little vent, run a burndown box in the tray right away from any spicy pipes.
@Dirtyrpide4life7 ай бұрын
Possibly run the vent to a tube relocated 🤷🏻. Nothing wrong with a secondary can from the vent tube maybe ?
@NoMatureContent7 ай бұрын
@@Dirtyrpide4life you'll still have the issue of it venting methanol fumes a foot from the header.
@Dirtyrpide4life7 ай бұрын
@@NoMatureContent maybe extend the tube (using a vapor tight legit tube , quite a bit of examples on land speed evacuation ) to an area far away from the hot side 🤷🏻👍🏻
@NoMatureContent7 ай бұрын
@@Dirtyrpide4life its just as easy to run large vent tubes to the back of the car to a burndown box.
@watahyahknow7 ай бұрын
a lot of the drag cars i see on youtube nowadays have the carchtank vent out the back of the car , when the rev up for the turbo to spool theres allways some vapour coming out the back usually from the boothlid might be the solution to youre problem , you could make a solid line go under the cab and end up in the bed behind the cab where you atach a big catchtank and little filter (maibe buils sumting half the size of the gastank so you have enough volume to catch all the methanol being blown through the carter , it allso prevent oil leaking out from landing on the ground in front of the rear tires kzfaq.info/get/bejne/f7CBqLapvsWdnZ8.html&ab_channel=NickkyBobbyInc. might be eazier to clean the rearfenders out if you put some teflon sheet over the surface a good trick to see if you thightened everything is put a line on the bolt with a white marker after you tightened and torqued the bolt on it , makes checking more visual and you should be able to spot forgotten fasteners eazier
@Dirtyrpide4life7 ай бұрын
White marker GREAT idea visual references 👍🏻.
@Dirtyrpide4life7 ай бұрын
MERRY CHRISTMAS to the BADDEST SKID TIPPER RIPPER IN USA 👊🏻👊🏻🥃🥃🎅